Machine Category : Miscellaneous
Sub - Category : Machines Lot
+ Advance Filter
MAKE
MODEL
Total machines found : 89
Sr. ID Make Model Description YOM Condition Photo Enquire
1 MA27041 Mecol Press Excentric Press

1) Model : SOV/0
YOM : 1973,
Serial no.3/703,
Force : 100 ton,
Stroke : 120 mm,
Stroke per minute : 130,
Table width : 380 mm,
Distance ram - table : 305 ,
Ejector force: 4 ton,
Ejector stroke : 50 mm,
Configuration :
With pneumatic bottom ejector,
With mechanical top ejector,
With GAVA automation

2)Model : SVO/2
YOM : 1972,
Serial no.3/703,
Force : 200 ton,
Stroke : 150 mm,
Stroke per minute : 120,
Table width : 470 mm,
Distance ram - table : 400,
Ejector force : 2 ton,
Ejector stroke : 70 mm,
Configuration:
With pneumatic bottom ejector,
With mechanical top ejector,

3) Model : SOV/2L,
YOM : 1972,
Serial No: 3/635,
Force : 180 ton,
Stroke : 150 mm,
Table width : 720 mm,
Distance Ram - Table : 420 ,
Cushion force : 40 ton,
Configuration:
With cushion,
With mechanical top ejector,
With GE/1 sub press
Good Condition Photo
2 MA26608 1) Category : Plano Miller,
Make : Stanko,
Model : 6100,
Number of vertical carriages : 2,
Number of lateral carriages : 2,
Connection : ISO 50,
Spindle speed : vertical heads 25/800 rpm - horizontal 25/800 rpm,
Distance between uprights : 1300 mm,
Between table spindle nose : 1250 mm,
Table : 1000 x 4000 mm,
Longitudinal stroke table : 4200 mm,
Vertical stroke cross tie : 900 mm,
Hanging of control,
Weight : 39.850 kg,
Dimensions : 10,390 x 4360 x 4000 n mm.

2) Make : Pietro Carnaghi,
Displayed,
Number of vertical carriages : 1,
Number of lateral carriages : 1,
Vertical carriage head : Ram square,
Connection : ISO 50 hydraulic,
Direct current motor,
Distance between uprights : 1750 mm
Table : 6000 x 1450 mm,
Longitudinal stroke table : 7000 mm,
hanging of control.
Good Condition Photo
3 MA26536 1) CNC Heavy Duty Lathe :
Make : Skoda,
YOM 2009 Retrofited

Max. swing dia : 2000 mm,
Max. work piece length : 15000 mm,
Work piece weight : 60 tons,
Main motor : 120 kw,
Control : Sentroll 2,

2) CNC Heavy Duty Lathe
Make : Mitsubishi
YOM : 2009 Retrofited

Chuck dia : 2400 mm,
Swing over carriage : 2000 mm,
Max. swing dia : 2800 mm,
Width of bed : 1500 x 400 mm,
Max. work piece length : 15000 mm,
Work piece weight : 100 ton,
Quill dia : 500 mm,
Rpm : 0.63 ~ 118 Rpm,
Main motor : 120 kw,
Control : Sentroll 2.
Good Condition Photo
4 MA26451 4 Units of Rotary table:
1) Make : Hamatsu, Model : RTB-S200, Year : 1969, Table size : 2000 x 2000 mm

2) Make Mitsubishi, Model : DIT14-18SAF, Year : 1969, Table size : 1800 x 1800 mm, Stroke : 1200 mm,

3)Make : Daiwa, Model : AFT16, Year : 1983, Serial No. : 1, Table size : 1600 x 1600 mm,

4) Make : Daiwa, Model : AFT16, Year : 1983, Serial No. : 2, Table size : 1600 x 1600 mm.
Good Condition Photo
5 MA26390 1) Internal Grinding Machine - Make : SIW 3/1E CAC:
Made by: WMW Germany, Work Workpiece diameter: 15-110 mm, Width: 8-40 mm, Max. swivel angle of workhead: 60˚, Work piece speed: 125-2000 rpm, Grinding table travel: 200 mm, Inmoving displacement: 25 mm, Weight: 2.8 ton

2) External Grinding Machine - Make: SWA AGL 50/4 PC
Made by: WMW Germany, Diam. of pcs (automatic): 13-63 mm, Work piece width: 8-38 mm, Work piece spindle speed: from 160 up 1700 U/min, Work piece spindle adjustmen: 180 mm, Wheelhead quick adjustment: 5 mm, Grinding spindle speeds: 1330-1900-2280 r.p.m., Peripherical speed: 35/50/60 m/s, Grinding spindle swiveling: 20˚, Weight: 4ton.
1988 Good Condition Photo
6 MA26116 Cylindrical Grinding :

1) Make : WMW,
Model : SU 315 x 1500
YOM : Unknown, but in our opinino should be around the 70'
Details:
Grinding diameter : 315 mm,
Grinding length : 1500 mm,
Center height : 165 mm,
Work piece weight : 300 kg,
Total power 9 kw,
Machine weight : approx. 5,5 tons,

2) Make : Tos,
Model : BHU 32x 1500
YOM : 1987,
Details :
Grinding diameter : 315 mm,
Grinding length : 1500 mm,
Center height : 160 mm,
Work piece weight : 300 kg,
Total power : 9,5 kw,
Machine weight : aprox. 6 ton.
Good Condition Photo
7 MA25789 WMW Niles ,Germany 1) Model : ZSTZ500C3P,
Category : Gear Grinding,
YOM : 1979,
Reference No. : 12-00149,
Max. diameter of work piece : 500 mm,
Modul : 10 mm,
Max. weight of work piece : 250 kg,
Machine weight : 4500 kg,
Dimensions L x W x H : 2500 x 2100 x 2000 mm,
Main motor output : 9.3 kW.

2)Model : ZSTZ630C3,
YOM : 1984,
Reference No. : 12-00150,
Max. wheel dia : 630 mm,
Max. gear width : 215 mm,
Max. module : 1 mm,
Number of teeth : 5~140 mm ,
Max. stroke length : 225 mm,
Table dia : 500 mm,
Max. table load : 400 kg,
Grinding wheel dia : 270~350 mm,
Max. helical angle : 45 deg.,
Number of grinding strokes : 75~315 mm,
Electrics : 220/380 V/3/50Hz,
Total power requirements : 6.5 kW,
Machine weight : 6.3 ton,
working condition ,under power Photo
8 MA25374 Category : Horizontal Table Type CNC,
Make : Tos,
Model : WHN130,
YOM : 1988/ Overhold 2010,
Spindle dia : 130 mm,
X travel : 3500 mm,
Y travel : 2000 mm,
Z travel : 1220 mm,
W travel : 800 mm,
Spindle motor : 27 kw,
Spindle taper : DIN 69871, ISO50,
Feeds : 4-6000 mm/min,
Bed size : 1600 x 1800 mm,
Job weight : 10 ton,
Control : Siemens 810 CNC,

Category : Horizontal Floor Type,
Make : Pegard,
YOM 1980/ Overhold 2012.
Spindle dia : 130 mm,
X travel : 6000 mm,
Y travel : 2000 mm,
Z travel : 3000 mm,
W travel : 800 mm,
Spindle taper : ISO50,
Table Size : 2000 x 1420 mm,
Table load : 15 ton,
Motor power : 24 kw,
Siemens motor.
Good Condition Photo
9 MA24475 Sedin Russia 1) Vertical Turret Lathe 1512 :-
YOM: 1981,
Country of origin: Russia,
Specification -
Max turning dia : 1250 mm,
Max turning height : 1000 mm,
Max workpiece weight : 4000 kg,
Faceplate dia : 1120 mm,
Faceplate speed range : 5 - 250 rpm; 18 steps,
Main motor power : 30 kW,
Max strokes,
Upper support horizontal : 775 mm,
Upper support vertical : 700 mm,
Side support horizontal : 630 mm,
Side support vertical : 1000 mm,
Feedings range : 0,03-12,5 mm/rev,
Fast stroke : 2000 mm/min,
Dimensions : 2 920 x 2 705 x 4100 mm,
Weight about : 16 500 kg.

2)Vertical Turret Lathe 1531M :-
YOM : 1971,
Country of origin : Russia,
Specification -
Swing : 1250 mm,
Plate size : 1120 mm,
Max working diameter :
With vertical carriage : 1250 mm,
With side carriage : 1120 mm,
Max working height : 1000 mm,
Max working weight : 3200 kg,
Dimension (width,lenght,height): 3050x3280x4140 mm,
Machine weight: 14150 kg.



Good Condition Photo
10 MA23924 1) Open die forging hammer,
Make: Stanko,
Modle :MA4134A,
Description:
Nominal weight of falling parts : 250kg,
Energy of impact : 5,6 KJ,
The greatest number of impacts in a minute : 150 mm,
Distance from an axis of the woman up to beds : 420 mm,
Height working area : 450 mm,
Main electric motor power : 22 kw,
Weight of a hammer with an anvil-block : 7850 kg,
Quantity : 1,
2)Open die forging hammer,
Make : Stanko,
Modle : MA4132,
Description:
Nominal weight of falling parts : 160 kg,
The greatest number of impacts in a minute : 196 mm,
Main electirc motor power : 15 kw,
Weight of a hammer : 5290 kg,
Quantity: 3.
Good Condition Photo
11 MI5682 1. Borer Horizontal Floor Type -
Make: Scharmann
Spindle: 130 mm,
X: 4500 mm,
Y: 2000 mm,
With 3 axis DRO, facing chuck & Rotary table,
Rotary table size: 1800 mm X 1600 mm,
rotary table travel: 1650 mm,
Floor plate: 3000 X 5000 mm,
With telescopic cover,
Power: 12 kws.
2. Borer Horizontal Floor Type -
Make: Collet.
Spindle: 150 mm,
X: 4000 mm,
Y: 3000 mm,
Z: 1400 mm,
Floor plate size: 4000 mm X 2000 mm,
Rotary table size: 2200 mm X 1450 mm,
With 3 axis DRO & Telscopic cover.
3. Borer Horizontal Table Type -
Model : AF85.
Spindle dia 85 mm,
X= 1600 mm,
Y= 1100 mm,
Long travel 2000 mm,
With facing chuck & DRO.
Good condition,under power Photo
12 MA23037 1) Vertical Machinery Center
Make : Beaver Partsmaster,
Dis : Heidenhain TNC 155 control; table 700 x 400mm; travels x - 500, y - 400, z - 400mm; ISO 40 spindle taper; 16 tool ATC; spindle motor 7.5 kw; tooling; Renishaw probe.

2) CNC Lath
Make : Churchill,
4 axis CNC Lathe; Fanuc control; twin turrets, 12 station upper turret, 8 station lower turret; 315mm 3 jaw chuck; swing over bed 540mm; max turning diameter 380mm; between centres 750mm; tailstock; speeds to 4000 rpm; swarf conveyor; Renishaw probe.
Good Condition Photo
13 MA23036 2 Hydraulic Straightening Presses
1)75 Ton Hydraulic Straightening Press, Bed Length 4000 mm, Twin
Tailstocks, 200 mm Diameter RAM, Adjustable Steadies. Press Travels
alongside the bed.

2)Make : MAVILOR,50 Ton Hydraulic Straightening Press with Tailstocks,
Distance Between Tailstocks 1500mm, Press RAM Diameter 130 mm. Air
Operated Tailstock, Press travels alongside the table


Good Condition Photo
14 MA22867 1. Jig borer Hauser 2A3 -
Dimensions and weight:
Space requirements and width: 2000 mm,
Height: 2000 mm,
Depth: 2500 mm,
Weight of the machine including accessories: 650 kg.
Box dimensions : width - 1200 mm, Depth - 1700 mm, Height - 1720 mm,
Application field:
Applicable table dimensions - 360x240,
Table cross travel - 200 mm,
Table longitudinal travel - 200 mm,
Number of t-slots: 6,
Width of t-slots : 10,
t-slots distance: 54,
Maximum table load: 80 kg,
Max spindle diameter: 50 mm,
Spindle speeds range: 150 -3000 rpm,
Spindle travel - 70 mm.
2. Jig grinder Hauser 3SM -
Dimensions and weight:
Space requirements and width: 3000 mm,
Heiht: 3000 mm,
Depth: 3000 mm,
Weight of the machine including accessories is about 1750 kg.
Box dimensions : width - 1480 mm,
Depth - 2100 mm,
Height - 2700 mm.
Application field:
Applicable table dimensions - 550x320,
Table cross travel - 250 mm,
Table longitudinal travel - 400 mm,
Number of t-slots: 6,
Width of t-slots : 10,
t-slots distance: 54 or 40 mm,
Maximum table load: 200 kg,
Max spindle diameter: about 220 mm,
Vertical spindle travel, steeples control: 3-110 mm,
Spindle speed of planetary motion : 5 -330 rpm.
3. Jig grinder Hauser 5SM -
Dimensions and weight:
Space requirements and width: 4000 mm,
Height: 4000 mm,
Depth: 4000 mm,
Weight of the machine including accessories is about 4200 kg,
Box dimensions : width - 2200 mm,
Depth - 2250 mm,
Height - 2750 mm,
Application field:
Applicable table dimensions - 770x900,
Table longitudinal travel - 700 mm,
Grinding wheel head cross travel : 500 mm,
Number of t-slots: 6,
Width of t-slots : 14,
Maximum table load: 650 kg.
Max spindle diameter: about 220 mm,
Vertical spindle travel: 5-150 mm,
Spindle speed of planetary motion : 5 -330 rpm.
Very good condition Photo
15 MA22784 1. Abeseki Die Spotting Press - 300 Ton, 3300x2000x2000 No Tilting Bolster - 1989
2. Kong Die Spotting Press - 30 Ton, 2200x1500x1800 No Tilting Bolster - 1978
3. Kojima Die Spotting Press - 50 Ton, 2500x1500x2000 No Tilting Bolster - 1965.
4. Amino Die Spotting Press - 50 Ton - 1973.
Good Condition Photo
16 MA22658 1. Lathe victor tns 1 de 1990 fanuc om :-
Machinetype : CNC Lathe - Inclined Bed Type,
Make : VICTOR,
Type : TNS 1,
Newin : 1989,
Control CNC,
Location : FRANKREICH,
Country of origin :Taiwan,
Term of delivery : immediately,
turning diameter : 250 mm,
turning length : 600 mm,
control Fanuc O-T,
centre height : 140 mm,
centre distance : 700 mm,
cross movement. (x-axis) :115+20 mm,
longitudinal travel : 600 mm,
turning speeds bis 2500 U/min,
total power requirement 12 kW,
weight of the machine ca.4 t,
dimensions of the machine ca.m.
With CNC control Fanuc O-T, 10-fold revolver, spindelbohr 50 mm, chip conveyor.
2. Lathe nakamura st 2 de 1986 fanuc 10
Machinetype CNC Lathe,
Make NAKAMURA TOME,
Type ST 2,
Newin 1986,
Control CNC,
Location FRANKREICH, dpt 90,
Country of origin Japan,
Term of delivery nach Absprache ab Standort,
turning diameter 550 mm,
turning length 360 mm,
control FANUC 10 TE,
turning diameter over slide 330 mm,
turning speeds 3.500 U/min,
rapid traverse 7,5 / 15 (X,Z) m/min,
power capacity 11 kW,
number of tools 12,
tool taper JAPAN,
1
42
chip conveyor JA,
Other information,
FANUC 10TE.
3. Center mori-seiki mv junior de 1986 fanuc 10
Machinetype Machining Center - Vertical,
Make :MORI SEIKI,
Type : MV junior,
Newin : 1988,
Control CNC,
Location :FRANKREICH,
Country of origin : Japan,
Term of delivery : immediately,
x-travel : 560 mm,
y-travel : 410 mm,
z-travel : 460 mm,
control FANUC 10M,
rapid traverse X-axis 20 m/min,
rapid motion - y-axis 20 m/min,
rapid traverse Z-axis 15 m/min,
table surface area 900 x 450 mm,
tool taper BT 40,
number of toolholder-holes 20,
max. tool diameter 80 mm,
max. tool length 250 mm,
max. tool weight 8 kg,
turning speed range -8000 U/min,
total power requirement 5,5 / 7,5 kW,
weight of the machine ca.5 t,
dimensions of the machine ca. 2,48 x 2,25 x 2,8 m,
Vertical Processing Centre with FANUC 10M CNC control, electric hand wheel, spindle load display, double-door full casing, coolant device, emergency cut-off.
4. Center maatsura avec diviseur.
Machinetype Machining Center - Vertical,
Make : MATSUURA,
Type : FX 1,
Newin : 1995,
Control CNC,
Location : FRANKREICH,
Country of origin : JAPAN,
Term of delivery : IMMEDIATELY,
x-travel : 510 mm,
y-travel : 360 mm,
z-travel : 460 mm,
table-size 760 x 380 mm,
turning speed range : 30.000 U/min,
feeds longditudinal/cross/vertical : 1 - 10.000 mm/min,
rapid traverse : 30 m/min,
Main power supply 100/40% ED : 3,7 KW,
dimensions of the machine ca.: 2,7 x 2,4 x 2,7 m,
weight 10,5 t,
tool taper : BT 30,
control YASNAC M80,
WITH 4 AXIS LEHMANN,
YASNAC M80 CONTROL,
30 x toolchanger,
Internal coolant supply 20 bar incl. chip conveyor
20 TOLS BT 30 INCLUD.







Good Condition Photo
17 MA22638 1. Gear generator straight bevel GLEASON 726 Revacycle - 5 units
Weight per machine: 9500 kg.

2. Sharpening machine - GLEASON 545 - 1 unit:
All blades for 127 mm to 460 mm diameters,
Wheel speeds: 1676 m/min,
Spindle piece-holder speeds:
Wheel motor:
60 Hz: 1800 rpm,
50 Hz: 1500 rpm,
Hydraulic pump motor:
60 Hz: 1200 rpm,
50 Hz: 1000 rpm,
Coolant pump motor:
60 Hz: 3600 rpm,
50 Hz: 3000 rpm,
Feed wheel motor: 1/3 HP,
Steam manifold:
60 Hz: 3600 rpm,
50 Hz: 3000 rpm,
Floor space: 2200 x 3000 mm,
Height: 2200 mm,
Weight: 5000 kg.

Good Condition Photo
18 MA22565 1)Borer Horizontal Floor type Machine.
Make : Scharmann
Type : WF100
YOM : 1973 / Overhould in 1987
Technical Details -
Traves : X/Y/Z = 6000mm / 1830mm / 800 mm,
Spindle dia : 125 mm / SK 50,
Table size : 1600mm x 2000mm / cap.15tons,
With DRO and 2 x Floorplates.
2)Ram Type Floor Borer with spindle head.
Make : Lazzati / Italy
Type : HB 127
YOM : 1976 / Overhould in 1989
Technical Details -
Traves : X/Y/Z = 8000mm / 2000mm / 900mm,
Spindle dia 150mm / SK 50,
Table size : 1600mm x 2000mm / cap.15tons,
With DRO and 2 x Floorplates.
Excellent condition,under power Photo
19 MA22499 1. VMC :

Make : Deckel Maho
Type : DMC 635 V
YOM : 2007 / like new machine, only with 265 spindle hours.


635 x 510 x 460mm,
Spindle turning speed : 8.000 RPM,
ATC : 20 Pos. / SK 40, Control : SIEMENS 840D powerline,

2. Turning Center

Make : Style
Type : SB 200
YOM : 2008 / like new machine

Swing dia over the bed : 480 mm
Swing dia over the Carriage : 280 mm
Turning length : 370 mm
Spindle bore : 61 mm
Spindle nose : A2-6 ISO
Turning speeds range : 50-5000 rpm
Spindle power : 11 kW
Machine weight : ca. 3500 kg

With live toolings.
Excellent condition,under power Photo
20 MA22444 Cugir,Romania 1)Gear hobbers - Cugir - FD400 Max hobing diam 400mm, Max module of teeth 8. 2) Gear hobbers - Cugir - FD320 Max hobing diam 320mm, Max module of teeth 6. 3) Gear hobbers - Cugir - FD250 Max hobing diam 250mm, Max module of teeth 6. 4) Gear hobbers - Cugir - FD500 Max hobing diam 500mm, Max module of teeth 8. Good Condition Photo
21 MA22435 1. CNC Vertical Turning Lathe
MAKE: SEDIN.
YEAR: 1994.
Table dia.: 2800 mm,
Max. swing: 3400 mm,
Max. turning height: 1800 mm.

2. CNC Vertical Turning Lathe
MAKE: SEDIN.
YEAR: 1994.
Table dia.: 2800 mm,
Max. swing: 3400 mm,
Max. turning height: 1800 mm,

3. CNC Vertical Turning Lathe
MAKE: RAFAMET.
MODEL: KCF 320.
YEAR: 1995.
Table dia.: 3200 mm,
Max. swing: 3480 mm,
Max. turning height: 1800 mm.

4. CNC Vertical Turning Lathe
MAKE: KARATS
YEAR: 1983
Table dia.: 3650 mm,
Max. swing: 4000 mm,
Max. turning height: 2000 mm.

5. CNC Vertical Turning Lathe
MAKE: QIQIHAR
MODEL: DVT 500
YEAR: 2008.
Table dia.: 4500 mm,
Max. swing: 5000 mm,
Max. turning height: 2000 mm.

6. CNC Vertical Turning Lathe
MAKE: QIQIHAR
MODEL: DVT 500
YEAR: 2009.
Table dia.: 4500 mm,
Max. swing: 5000 mm,
Max. turning height: 2000 mm.

7. CNC Vertical Turning Lathe
MAKE: QIQIHAR
MODEL: DVT 500
YEAR: 2009
Table dia.: 4500 mm,
Max. swing: 5000 mm,
Max. turning height: 3150 mm.

8. CNC Drill Master
MAKE: MADE IN KOREA
MODEL: DRD-5000 CNC
YEAR: 2008
Table dia.: 5000 mm,
Max. swing: 5000 mm,
Max. turning height: 300 mm.

9. CNC Drill Master
MAKE: MADE IN KOREA
MODEL: DGD 50x50
YEAR: 2009
Table dia.: 5000 mm,
Max. swing: 5000 mm,
Max. turning height: 300 mm.

10. CNC Vertical Turning Lathe
MAKE: KOLOMNA
MODEL: 1540T
YEAR: 1970
Table dia.: 4000 mm,
Max. swing: 4300 mm,
Max. turning height: 2000 mm.
Very good condition Photo
22 MA22326 1) Radial Drill 2M57 (1974)- max drill dia 75 mm , spindle overhang (the distance between the spindle axis and pillar surface) : 500 mm min , max 2000 mm , distance between the spindle end face and the base plate : min 400 mm , max 2000 mm , distance between the spindle end face and table 1500 mm max ,Drill head : spindle taperMprse No.6 , spindle stroke 500 mm , max travel of drill head 1500 mm , Arm: max vertical travel 900 mm , max angular rotation around the column 360 deg , table : table working surface : 630 x 800 mm , width of T slot 22 mm , number of slots 3+3 , slot to slot spacing 170 mm, base plate : working surface width 1250 mm , width of T slot 28 mm , number of slots 5 , slot to slot spacing 250 mm , speeds and feeds : number of spindle speeds 22 , spindle speed range 12.5 to 1600 RPM , number of spindle speeds 18 , spindle feed range 0.063 to 3.15 mm/rev , drill head rapid travel speed 5000 mm/min , arm rapid travel speed 750 mm/min , max drilling pressure 3200 kgf , max spindle torque 140 kgf.m , drive, dimensions and weight : three phase electric motors : main drive motor : power 7.5 kW , speed 1460 RPM , drive motor for rapid vertical travel of the arm (table) : power 3 kW , speed 1450 RPM , drive motor of drill head hydraulic station : power 0.8 kW , speed 1400 RPM , column clamping motor : power 0.5 KW , speed 1440 RPM , dia of circle circumscribed when the arm is swivelled through 360 deg 5690 mm , overall dimensions 3500 x 1550 x 3875 mm , weight 10 tons. 2) Rotary table E20(1977)(Price of only rotary table USD 30,000 C&F India) Good Condition Photo
23 MA21841 Russian Gear grinding machines MAAG HSS60BC + MAAG HSS30 + MAAG HSS10.
Change gears are available.
1972,1970,1971 Excellent Photo
24 MA21678 1. CNC Slant Bed 4 axis Lathe :
Make : Heyligensteadt Heynumat 5 F-2.
YOM : 1991.
CNC Control : Siemens 3T.
Turning dia : 720 mm,
Turning length : 1500 mm,
Over the Carriage : 370 mm,
Revolver 2 x 12 Pos.,
Tailstock and chip vonveyor, with all documents.

2. CNC Flat Bed 4 axis Lathe :
Make : Voest Alpine, WNC 722/1600,
YOM : 1981 / Retrofit in 2004 by Company WMSH, Heilbronn.
CNC Control : Siemens 3T.
Turning dia : 750 mm,
Turning length : 1600 mm,
Centre height : 370 mm,
Revolver : 8 Pos.
With Tailstock , Chip Conveyor and all documets.
Excellent Photo
25 MA21533 1. Wide Type C Frame Press,200tons Make:Komatsu,Model:OBW-200, YOM:1976, Stroke:250mm, SPM:30-50,Die Height:500mm, Adjust:250mm, Bolster:2400x800mm with Die cushion includes 400mm wide leveler line comprising of Sonoruka UCW-1240 Double head uncoiler (1977) Sonoruka L3240 Leveler (1977), Sonoruka PH-3240 Loop controller (1977)
2. Straight Sided Mechanical Press, 150 tons, Make:AIDA, PS-15,YOM:1973, Stroke:200mm, SPM:40, Adjust:100mm, Bolster:700x800mm with Die cushion
3. C Frame Press, 45 tons, Make:Amada, Model TP-45, YOM:1972m Bolster:800x450mm, Die Height:200mm
Excellent condition,under power Photo
26 MA21501 WMW Erfurt,Germany PEEI400 1.PEEI400,400ton, Table size:1250x750mm, RAM Surface :800x630mm, Stroke:40-140mm, Ram adjustment :125mm,Strokes:32/min, Throat:400mm, Distance table to Ram:450mm
2. PEEI400/400,YOM:1978, Table:1250x750mm, Ram Surface:800x630mm, Stroke:40-140mm, Ram Adjustment:125mm, Stroke:32/min
1970 & 1978 Good Condition Photo
27 MA21465 1)NC Shearing Machine.
Make : Gookdo,
YOM : 1997,
Working capacity : 20T x 6100 mm.
2)Press Brake.
Make : Gookdo,
YOM : 1997,
Working capacity : 20T x 6100 mm,
Conventional type with clearance device.
Excellent Photo
28 MA21460 1. Vertical Turret Lathe - Single Column: DORRIES SD 100 - YEAR 1970
faceplate diameter 1000 mm,

swing diameter 1300 mm,

turning height 1180 mm,

max. ram stroke 820 mm,

faceplate turning speed range 4,75 - 250 U/min,


2. Vertical Lathe OMBA TV 12 - YEAR 1975

max. swing diameter 1500 mm,

face platdiameter 1200 mm,

turning heigh UNDER CROSS RAIL 1040 mm,

max. boring depth 800 mm,

faceplate speed 6- 160 rpm,

feed 0,007-8 mm/U,





3. Vertical turret lathe DOERRIES SD 125 - YEAR 1968

faceplate diameter 1200 mm,
swing diameter 1400 mm,
turning height 1200 mm,
max. ram stroke 750 mm,
faceplate turning speed range 4,75 - 210 U/min,

4. Vertical turret lathe WEBSTER BENNET 48 - YEAR 1968
max. swing diameter 1300 mm,

face platdiameter 1200 mm,

turning heigh 880 mm,

max. boring depth 700 mm,

faceplate speed 4,75 - 125 rpm,

feed 0,044-8 mm/U,
Good Condition Photo
29 MI5487 1. Friction Drop Hammer - 2 Ton (Make - NKH) Brand New

2. Pneumatic Clutch Trimming Press - 300 Tons (Make - Mankoo) Brand New

Good Condition Photo
30 MA21435 Erfurt 1.ERFURT Mod. PKnZT VI 800
Pressure: 5000/3150 KG
table-size:2500 x 1700 mm

2.ERFURT Mod. PKZZ 500 -
Pressure: 5000 KG
table-size:2800 x 1500 mm

3.ERFURT Mod. PE-4-H 500 TS
Pressure: 5000 KG
table-size:2800 x 1800 mm

4.ERFURT Mod. PKZV/III/ 500 FS
Pressure: 5000 KG
Table-size:3150 x 2100 mm

5.ERFURT Mod. PKZZ/I/IV 500
Pressure: 5000 KG
Table-size:2800 x 1500 mm

6.ERFURT Mod. PE-2-H 500 FS
Pressure: 5000 KG
Table-size:2800 x 1500 mm

7.ERFURT Mod. PKZZ 200
Pressure: 200 T
Table-size:2500 x 1000 mm

8.ERFURT Mod. PKZZ 315
Pressure: 315 T
Table-size:2500 x 1400 mm

9.ERFURT Mod. PKZZ 315
Pressure: 315 T
Table-size:2500 x 1400 mm

10.ERFURT Mod. PKnT 315/190
Pressure: 315 T/190
Table-size:1400 x 1400 mm

11.ERFURT Mod. PKrR 200/2-2500
Pressure: 200 T
Table-size:2500 x 1250 mm

12.ERFURT Mod. PKrR 200/2-2500
Pressure: 200 T
Table-size:2500 x 1250 mm

Good Condition Photo
31 MA21430 1. Single Column VTL, Dorries SD100, YOM:1970, Faceplate diameter:1000mm, Swing diameter:1300mm, Turning Height:1180mm, Max.Ram Stroke:820mm, Faceplate Turning Speed Range:4,75-250 U/minm
2. VTL,Make: OMBA TV12, YOM:1975, Max.Swing diameteR:1,500mm, Max. face platediameter:1,200mm, Turning Height under cross rail:1040mm, Max.boring depth:800mm, Faceplate Speed:6-160rpm, Feed:0.007-8mm/U
3. VTL, Make:Doerries SD125, YOM:1968, Faceplate diameter:1200mm, Swing diameter:1400mm, Turning Height:1200mm, Max.Ram stroke:750mm, Faceplate Turning SPeed range:4,75-210U/min
4.VTL, Webster Bennet48, YOM:1968, Max swing diameter:1,300mm, Face plate diameter:1,200mm, Turning Height:880mm, Max.boring depth:700mm, Faceplate speed:4,75-125rpm, feed:0,044-8mm/U
Good Condition Photo
32 MA21359 1. Heavy Duty Lathe :
Make : WMW NILES
Type : DLZ 1000
Condition good.
Technical details :
Turning length : 4000 mm
Swing over the bed : 1000 mm
Swing over the Support : 600 mm
Machine weight . 12 tons.

2. Surface Grinder
Make : BLOHM
Type : HFS12
Conditiion good

Technical details :
max. Grinding Length : 1200mm
max. Grinding width : 400mm
Table suface area : 1800x300mm
Power : 17,5kW
Automatic Finimatic
Magnet Table : 1200 x 300mm
Machine weight : 4.5 tons


Good Condition Photo
33 MA21340 1. CNC Lathe,Model- N.E.F560, CNC Gildemeister EPL, Diameter on bed:600mm Distance between centers:1000mm, Turret with 6 tools, Automatic pulling ouy, Machine dimensions:3,700x1800x1800mm, Equipment:board of tools,
2.Model:USC2, CNC Siemens Sinumerik 3T/4, Distance between centers:1,000mm, Bed:600mm, Spindle:8mm, Maximum bar pass:76mm, Motor power:34Kw, 2,800r.p.m ,Equipment: Hydraulic plate dia 400mm with 3 hooks and 1 cylinder, Monoblock tailstock, 12 toolholders.
Good Condition Photo
34 MA21208 1. Surface Grinder, Make :Elb, Type:SWB8VAII, YOM:1966, Table size:1300x450mm,Grinding area:800x450mm, Height:600mm, Machine weight:4500kg, Accessories: Magnet Table:800x400mm Wet Grinding device and lot of div.size grinding wheels. Excellent condition
2. Single Coloumn VTL, Make: Dorries, Type:DS100, YOM:1967, Chuck dia:1000mm, Swing dia max:1300mm, Turning Height:1180mm Table load max:8000kg, Speeds range:4,75-250rpm,Revolver :6pos, Power:40kw, Machine weight:13,5000kg
1966 &1967 Good Condition Photo
35 MA21055 1. Model:EX15V,YOM: 1979, Workpiece diamter:2280mm, Max.Face width:170mm,Module:12mm, Working table diamter:1900mm, Spindle max stroke :200mm, MAx.distance between the cutter axis and the table:1200mm, machine weight:18 tons,
2. Model:RS-25S, Make:Sheiss Gmbh, YOM:1978, Excellent working condition, max.workpiece diamter:3700mm, module:15mm, Working table diamter:1830/2600mm. The machine tool performs complex machining of workpieces, including gear shaving operation.
These 2 machine in four containers.
1979 &1978 Good Condition Photo
36 MA21018 Chinese Cylinder Capacity:1500mt, CylinderBore (mm):900mm, Cylinder OD(mm)1150, Stroke length:1000mm, Ram:600mm,Type :Double Acting,Mounting Type: Rear flange type, mounted directly on structure vertically downward (hydraulic press application),
2. Hydraulic Power Pack, Capacity:for 1500MT Hydraulic Cylinder,
Motor:suitable to operate dual pumps,type:tank mounted, tank capacity:about 2000l,directioal control valve:solenoid operated type, pressure relief valve:required,inter connected hydraulic pipe lines:c.s.painted,speed: approach:10-12mm/s, pressing:1.5mm/sec, return:18-20 mm/sec, cylinder wight:about 25t
Brand New Brand New Photo
37 MA20992 2 units FD500- dia 500, modul 8
1 unit FD400- dia 400, modul 8
1 unit FD320- dia 320, modul 6
1 unit FD250- dia 250, modul
Retrofitted in 2010 Good condition,under power Photo
38 MA20986 1. Vertical Machining Center AXA VSC 0-1000, YOM:1989, X:1000,Y:300,Z:550mm, Control:Siemens Sinumerik3, SK40, 4 axis

2. Horizontal Machining Center DECKEL DC40, YOM:1987, X:630mm Y:500mm,Z:630mm, Control:Siemens system3
Good Condition Photo
39 MA20949 1. Universal Milling Machine, AUERBACH FU 250,680x200x380mm,Table:1000x250mm, Vertical swivel head, Horizontal spindle with overarm, YOM:1983
2. Vertical Milling Machine, AUERBACH FSS 250, 680x200x380mm, Table:1000x250mm, YOM:1978,
3. Guillotine Shear, PIESOK NTC 2500-4, 2500x4mm, YOM:1988
4. Combined Section Shear, NOSSEN ScFDLA 16, Flat 200x16mm, Round:45mm, Sections:120x12mm, Notches & punch, YOM: 1983
Good Condition Photo
40 MA20917 2 x Bridgeport MOdel BPC320H Horizontal Machining Centres with Fanux Om-1990
1 x Fanuc model T Tape Drill with Fanuc Om
Good Condition Photo
41 MA20840 1. Lathe vertical Turning CNC - Make : Stanko, Model : 1A516MF3, YOM : 1986, Table Dia. 1600 mm, Faceplate dia 1500 mm, CNC NUM MILL. 2. CNC Milling Machine : Make : Muller, Model : CU 1250V, YOM : 1992, Table : 1350 x 660 mm, Travels : 1500 x700 x 800 mm, Speed : 2000 tr/mn, ATC: 20 outlis, CNC NUM 1000. Good Condition Photo
42 MA20813 Machine lot includes: Rolls I2220(12X2000mm)- 2 pcs,make Tiraspol; rolls I2222(16x2000mm)-1pcs, make Tiraspol; Shear Guilotine NK3418(6,3x2000mm) - 1pcs; Billet Shears 5220 - 1 pcs. needs reconditioning Photo
43 MA20807 1. CNC Lathe Boehringer VDF 250C,Dia:420x1000mm
2. NC Horizontal Machining Center WYSSBROD, X:500mm, Y:400mm, Z:400mm
3. CNC VMC Kitamura M4-V, X:914mm,Y:508mm, Z:571mm
4. CNC VMC AXA VSC-1, X:1820mm, Y:350mm,Z:480mm
5. CNC VMC SIGMA Ek110/40, X:1200mm, Y:650mm, Z:550mm
6. CNC VMC CINCCINATI Milacron,X:800mm,Y:600mm,Z:600mm
7. CNC HMC Deckel DC45 X:800mm,Y:630mm,Z:710mm,Workable:500x500mm, 2 pallets(rotarty tables)
8.CNC VMC AXA VSC0-1000, X:1000mm, Y:300mm,Z:550mm, 4 axis
Good Condition Photo
44 MA20802 1. Radial Drilling Machine type GR820, Drilling capacity in steel:80mm, Drilling slide stroke on arm:1,600mm, Special accessories- universal table, Weight:8000kg,
2.Radial Drillling machine, type VR6A, Drilling capacity in steel:60mm, Drilling slide stroke on arm:2,000mm, Special accessories:fix table, Weight:7000kg
3.Radial drilling machine, type VR6, Drilling capacity in steel:60mm, Drilling slide stroke on arm:1,600mm, Special accessories:fix table, Weight:7000kg
Good Condition Photo
45 MA20801 1. Gap Shearing Machine- 13tx3000,Amada, Model:H3013, YOM:1981
2. Bending Machine- 4.5tx1500mm, Senba, YOM:1967,2.2kW
Good Condition Photo
46 MA20800 1) Nagao 100ton Press NCP100, 1985
2) Aida 30ton Press PC-3, 1981
3) Amada 45ton Press TP-45
4) Amada 60ton Press TP-60
5) Amada 80ton Press TP-80X, 1981
6) Nagao 75ton Press NCP-75, 1986
7) Nagao 75ton Press NCP-75, 1986
8) Aizawa Press Brake 4FT Width.

Good Condition Photo
47 MA20798 1.80Ton Aida C18,1976
2.80Ton Aida C1-80(2), 1984
Stroke:160mm, with variable speed motor
3.55Ton Aida Pc-55, 1971
Stroke:150mm,
4.45Ton, Komatsu OBS45,1981
Stroke:100mm, with variable speed motor
5.60Ton Komatsu OBS60
Stroke:120mm,with Die cushion
6.80Ton Komatsu OBS80,1981
Stroke:180mm
7.80Ton Komatsu OBS80, 1984
Stroke:180mm, with Die cushion
Good Condition Photo
48 MA20709 Gleason USA Hypoid Helixform Gear Finisher: 4 machines.
Hypoid Gear Rougher : 4 machines.
Good Condition Photo
49 MA20702 1. Thread Rolling Machine, UPW 12.5x70, WMW BAD DUEBEN,
pressure 12,5 t,
max. workpiece diameter 70 mm,
threading length 125 / 2000 mm,
turning speed range 20 - 90 U/min,
voltage 380 V,
shaft diameter 63 mm,
total power requirement 8 kW,
weight of the machine ca. 1,9 t,
dimensions of the machine ca. 1,3 x 1,2 x 1,2 m.

2. WMW Niles DKE-1320 VTL,
Table diameter 1050 mm,
Max Swing 1320 mm,
Main motor 18kW,
Size 2250x2500x2950 mm,
Weight 10t.

3. Csepel RF 51 Radial Drill -
Spindle 80 mm,
Arm 2500 mm,
Weight 6,5t.

Good Condition Photo
50 MA20675 1. Gear hobbing machine - ARCOIDAL,

Model: ZFTKK 500/2S,

Comstruction year 1972.

Max module 16 mm,

Max wheel diameter 560 mm,

2. Gear hobbing machine - ARCOIDAL,

Model:ZFTKK 500/10,

Comstruction year 1969.

Max module 13 mm,

Max wheel diameter 500 mm.



Good Condition Photo
51 MA20611 1 CNC-Bed milling machine FPT
Typ: LEM 2

New in: 1992

Controlling system: Heidenhain TNC 407 + Tastrad
Travel: X: 1.400 mm / Y: 650 mm / Z: 850 mm

Table size: 2.050 x 660 ( Belastung 2500kg ) 6 x Nut 18

Spindle speed: 0 - 3.000 rpm. ISO 40 / 15 KW

Feed: 10 - 3.000mm/min

Rapid motion: 10m/min



Coolant aggregate for milling head

Central lubrification

Hydr. for axis clamping and balancer cylinder

Weight: 8,5 to

With complet documentation





1 CNC-Univ. milling machine HERMLE

Typ: UWF 1200 H

New in: 1991

Travel: X: 850 mm / Y: 630 mm / Z: 500 mm

Spindle sleeve travel: 95 mm

Spindle speed: 20 - 4200 rpm.

Driving power - spindle motor: 12 kW

Spindle attachment: ISO 40

No. of tools in magazin: 32 pcs.

Rapid motion X-axis 10000 mm/min

Rapid motion Y-axis 10000 mm/min

Rapid motion Z-axis 10000 mm/min

Feed range: 1 - 10000 mm/min

Table size: 1200 x 550 mm

Total power: 18 kW

Weight: approx. 4 to

Required space: approx. 4 x 3 x 2,6 mtrs.



Accessories and additional information:

CNC Toolmakingmachine with tool changer and Heidenhain 415 controller

for tool- and mould construction and for serial production. Hardened guides, synthetic compounded treat surface, man. trimmed in all 3 axis, as well as

composite structure made of mineral composite and cast iron for heigh accuracy. Revision- and service documents for approx. EUR 25.000,- - 30.000,-
Good Condition Photo
52 MA20447 Fortuna 1.RU 350x1000, Max grinding diameter:350mm, Max grinding length:1000mm, Max.eight of the workpiece between centres:500kg
2. RU 350x2000, MAx grinding diameter: 350mm, Max grinding
3. Faceplate diameter: 800mm, Maximum turning diameter:1000mm, Maximum turning length:400mm, Machine net weight:6ton
length:2000mm, tilting angle of the table:5 degrees, Max weight of the workpiece between centres: 300kg.
3. DP 800 ZERBST Facing Lathe
Good Condition Photo
53 MA20405 1) BARNAUL KB0034 knuckle-joint press; Capacity, ton 250; YOM 1987

2) TYAZHPRESSMASH VV1134 horizontal forging machine; Capacity, ton 250; YOM 1987
complete,excellent condition Photo
54 MA20400 1. Plano miller machine PENSOTTI model PR150, 4500x1500 mm, between column 1500 mm, DRO, the electrical box new few years ago, two milling head, two tool post. Machine excellent under power.

2. Vertical milling machine OERLIKON FB3H, 1600x800x800, DRO, universal head.


Good Condition Photo
55 MA20385 Matra Kira KV5MC Travel: X-650 mm Y-410 mm Z-510 mm, Table size- 900x400 mm, Table load capacity- 500 kp, Spindle turning speed range- Max 10.000 U/min, Spinlde taper ISO-40, Tool change unit- 20-fach, Feeds x/y/z-stepless- 1-5000 mm/min, Rapid traverse X&Y axis- 18 m/min, Rapid traverse Z-axis- 12 m/min, Control- FANUC Serie OM, Voltage- 380 V/50 Hz, Spindle drive- 5.5 kW, Total power requirement- 17 kVA, Weight of the machine- 4.5 t, Dimensions of the machine- 2.25 x 2,70 x 2,70 m. There are two machines like this 1) 1989 2) 1990 Good Condition Photo
56 MA20355 1. CNC Lathe, Make: Hardinge, Model: CHNC1, Control: SIEMENS 810T DBC: 500mm, Centre Height: 175mm
2. CNC Lathe, Make: Index, Model : G65-250, Control: SINUMERIC
3. CNC Lathe, Make: WMW, Model: DXF 2a, Swing over bed: 550mm, Swing over bed with guideways covered: 510mm, Slide way X-Axis:300mm,Slideway Z-Achse ( Max workingpiece length): 1330mm,tailstock drivable way for pressing: 1000mm
Good Condition Photo
57 MA20315 1) SEDIN 1525, 1983: Turning diameter- 2500 mm, Table diameter- 2250 mm, Turning height- 1600 mm
2) SEDIN 1L532, 1980: Turning diameter- 3200 mm, Table diameter- 2800 mm, Turning height- 1600 mm
Good Condition Photo
58 MA20300 1) Laser Cutting : Laser Trumpf L3003(1991). Format 3000/1500,65 kVA, pressure 6 Bar, Cutting power 200 Watts. 2) Turret Punch Press Amada Coma (1990). Format 3000 mn 1500 mn, capacity 50 tons, power 30 kVA, weight 18 tons , Machine controlled by addr and pc. Very good condition Photo
59 MA20262 1) Horizontal borer: Make-Richards, Model-PRT2
Spindle-60 mm, Facing head-420 mm, 160-500 rpm, Table top- 720 mm, Table bottom-600 x 840 mm, Vertical travel- 760 mm, Outter support/tailstock.
2) Planers double column/planer:
Table-140x240 mm, Under rail-120 mm, Between columns-160 mm, 1xtop & 1xside planning head, 1xmilling head, 44-643 rpm
Good Condition Photo
60 MA20042 1. WMW HECKERT, thread and spline worm hobbing GFL 400 x 3000 mm, with changing gears.
2. WMW HECKERT, thread and spline worm hobbing GFL 400 x 1000mm, with changing gears.
3. WANDERER, thread and spline worm hobbing GFV 500, with changing gears.

Good Condition Photo
61 MA19988 Kitamura 1.Machning Center Vertical
5 axis Kitamura - MyCenter 3B
YOM : 1989.
Control : Fanuc 11.
Traves : X/Y/Z = 820mm / 460 mm / 460 mm,
and extra extend height 250mm because of for 4+5 axis.
ATC : 30 Pos. Taper BT40,
Turning feeds : 8000 rpm / in 2 steps,
Oilcoolant for spindle,
Machine Weight : 6300 Kg.

2. Machining Center Vertical

3 axis Kitamura - MyCenter O.
YOM : 1990.
Control : Fanuc 10.
Traves : X/Y/Z = 305mm / 254mm / 254mm,
ATC : 16 Pos. Taper BT30,
Turning feeds : 7200 rpm,
Machine Weight : 2200 Kg.

4. Machining Center Vertical-
3 axis -Masino
YOM : 1992.
Control : Fanuc OM.
Traves : X/Y/Z = 712mm / 356mm / 510mm,
ATC : 18 Pos. Taper BT40,
Turning feeds : 6000 rpm,
Machine Weight : 4300 Kg.
Good Condition Photo
62 MA19952 Horizontal borer 2A622-1(with ball screw for 3-axis), 1984.,1120x1250mm.,Ф 110mm., Horizontal borer 2620V, 1975.,1250x1120mm.,Ф 90mm.,

Two machines-one container

Good Condition Photo
63 MA19875 Titan Romania Titan VTLs - SC14 and Sc17. Good Condition Photo
64 MA19854 Vertical turning lathe Sedin 1531, 1967. Maximum diameter of work piece - 1250 mm.,max height 1000mm.,weight of machine 14,2 ton.,

Screw-cutter lathe 1M65(Ryazan), 1975. Work piece maximum diameter 1000 mm; Work piece maximum length 5000 mm.

Two machines-one container.
Very good condition Photo
65 MA19790 1. Cnc Lathe Mac Sys Donghyup Mac 32 Fanuc 0T - 1990 (Qty : 2 Nos.),
Maxi dia 336 mm,
maxi dia with chuck 160 mm,
Maxi dia through spindle 32 mm,
X stroke 270 mm,
Z stroke 250 mm,
Spindle power 5.5 / 7.5 kw,
Approx weight 1900 kgs,
bar feeder,
Interface bar feeder,
Interface rs 232 c.
2. Cnc Lathe Biglia B131 S2 - (Qty :2 Nos.)one machine without chuck
maxi dia 320 mm,
dia over bed 520 mm,
distance between center 800 mm,
spindle bore 70 mm,
spindle nose Asa 6,
maxi spindle speed 3400 - 4150 - 3400,
Z stroke 420 mm,
X stroke 190 mm,
x 1 Z Rapid 12 m / min,
ball screw dia X axis 32 mm,
ball screw dia z axis 40 mm,
tail stock stroke 100 - 450 mm,
live spindle,
maxi dia 20 mm,
maxi tool stroke 70 mm,
power 1.5 kw,
maxi speed 300 rpm,
quill dia 85 mm,
quill taper 45,
maxi force 700 kgs,
turret 12 position,
tool section 25 x 25 mm,
indexion time 1 tool 0.7 sec - 6 tools 1.83 sec,
size 4250 x 1720 x 1700 mm,
approx weight 4200 kgs.
Very good condition Photo
66 MA19769 1.MAZAK SQT-200-M-1000L turning centre, new 2003, live tooling, C-axis, incl tooling, chip conveyor
2.MAZAK VTC-20-B vertical centre, new 1999, with 4. Axis rotary table, incl tooling chip conveyor
3.MAZAK MTV-414 vertical centre, new 1994, incl tooling, chip conveyor.

Excellent condition,under power Photo
67 MA19725 1. SUPERMAX CNC Vertical Machining Centre
Model: YCM VMC 1100A
Year: 1995
Control: FANUC OM,
Table size: 1200x530mm,
Travel XYZ:1100x600x630mm,
Max. spindle speed: 8000rpm,
Spindle taper: BT40,
Toolchanger: 30atc,
Spindle motor: 9kW / 11kW (30min rating).

2. TOS CNC Vertical Mill
Model: FGS40 CNC
Year: 1995
Weight: 4400Kg.

3.PICO Teach In Lathe,
Model:300,
Year : 1994
Between centres:2000mm,
Centre height: 200mm,
Spindle diameter:110mm,
Complete with 3-jaw chuck 250mm,

4. YUNAN Lathe
Model:CW6280
Year:2006
Between centres:5000mm,
Centre height: 400mm,
Spindle diameter:100mm,
Spindle speeds:11-800rpm,
Complete with 3-jaw chuck 330mm.

5. TOS Lathe
Year:1996
Between centres:1500mm,
Centre height: 250mm,
Spindle diameter:80mm,
Complete with 3-jaw chuck 250mm,

6. STANKO Lathe
Model:IM63B-1500
Year:1989
Between centres:1500mm,
Centre height: 350mm,
Spindle diameter:70mm,
Complete with 4-jaw chuck 500mm,
Main Motor:11kW.
Good working condition Photo
68 MA18930 1. Table Type Boring Machine - Conventional
Make : Wotan,
Model : B80T,
YOM : 1969.
spindle diameter 80 mm,
x-travel 1060 mm,
y-travel 900 mm,
z-travel 1400 mm,
surface area 1060x960 mm,
spindle travel ca. 600 mm,
number of spindle speeds 14-700 U/min,
weight of the machine ca. 10 t,
dimensions of the machine ca. 6x4x4 m.
2. Table Type Boring Machine - Conventional
Make : Wotan Iberica
Model : B75M,
YOM : 1971.
spindle diameter 75 mm,
x-travel 1060 mm,
y-travel 900 mm,
z-travel 1400 mm,
surface area 1000x800 mm,
spindle travel ca. 600 mm,
spindle speed: 12-1000 U/min,
weight of the machine ca. 10 t,
dimensions of the machine ca. 6x4x4 m,
3. Table Type Boring Machine - CNC.
Make : Juaristi
Model : MDR-70,
YOM : 1970.
x-travel 1270 mm,
y-travel 800 mm,
z-travel 900 mm,
surface area 900x700 mm,
spindle travel 500 mm,
spindle speed: 28-1400,
control Heidenhain TNC 155,
weight of the machine ca. 10 t,
dimensions of the machine ca. 6x4x4 m.



Good Condition Photo
69 MA18788 Amada,Japan 1) Amada Turret Punch (1987)
Madel Pega 244
Capacity 20 tons
Station 24
Auto Index 2
Control Fanuc 04PC

2) Amada Pressbrake(1989)
Madel RG-25
Capacity 25 tons
Bending Length 1020 mm
Control Auto Back Gague

Very good condition Photo
70 MA18740 Index 1. Lathe CNC - Index make- GB42 (Qty : 6 Nos.):
Weight without charger: +/- 3.000Kg. Dimensions without charger: +/- 3.000x1.000x1.500mm. Maximum bar diameter 42mm, turret with motorized tools and 2 axes, 2 cross carriages with 1 axi and 2 cross carriages with 2 axes, pick-up, 2 back estations, automatic discharging.
2. Lathe CNC - Index make - GS65 (Qty : 1 No.):
Bar diameter 65mm. Turret with 9 estations and 9 frontal motorized turrets. Including tools. Charger dimensions 4.000x1.000x1.500mm. Machine dimensions 2.500x2.000x2.300mm Height. Machine weight 5.000Kg.
3. Lathe CNC - Index make - GB65 (Qty : 4 Nos.):
Bar diameter 65mm. Turret with 9 estations. 3 Frontal toolholder turrets. Automatic bar charger. Charger dimensions 4.000x1.000x1.500mm Height. Machine dimensions 2.500x2.000x2.500mm Height. Weight 5.000Kg.
Good Condition Photo
71 MA18731 1. Doble side eccentric presses with double rod KRUPP - Qty : 2 Nos.
Capacity 200 Tn,
Table 1600x1000 mm,
Lateral windows 850x600 mm,
Travel regulation 300 mm,
Travel 400 mm,
Strokes per minute 30,
Distance between plate and hammer 550 mm,
Distance between columns 164 0mm,
Hammer 1600x1000 mm,
Additional plate 1000x1020x150 mm,
Motor power 30 KW,
Machine number: 2779,
Equipment: Frontal and lateral photoelectric barriers.
- Neumátic feeder, 300mm.
2.Hydraulic press SMG -
Potencia max. 15 Tn,
Mesa 990x880 mm,
Recorrido del pistón 550 mm,
Distancia máxima entre charrión y mesa 850 mm.
3.Throat eccentric press GUILLEN -
Capacity 125 Tn,
Variable travel,
Neumatic clutch,
Table size 1.000x780mm,
Hole diameter in the table 300mm,
Hammer 600x370mm,
Centralizad lubrication.
4. Doble side eccentric presses CLEARING -
Capacity 435Tn,
Table 2.700x1.630mm,
Travel regulation 600mm,
Strokes per minute 30,
Distance from the plate to the hammer 1200mm,
Additional plate 2600x1600mm,
Motor power 50KW,
Machine number: 2780,
Equipment: Photoelectric barriers.
- Bimanual.
- Double neumatic cushion.
5. Eccentric press BLANCH -
Model P2MSA-200.
Capacity 200Tn,
Table size 1500x1000mm.
Travel 300mm,
Strokes per minute 30,
Lateral Windows 350mm,
Neumático cushion 45Tn,
Cushion travel 160mm,
Machine number: 3939/2.
6. Eccentric presses BLANCH - QTY - 2 NOS.
Capacity 250Tn,
Table side 2500x1300 mm,
Maximum opening 1100 mm,
Travel 14 de 160 a 360 mm,
2 Cushions,
Max. cushion capacity 20 Tn,
Max. cushion press 7 bars,
Cushion travel 180 mm,
Motor power 50 CV,
Air press of the clutch 4,5 bars.
Neumatic clutch.
7.Feeder lines PROCESOS DEL FLEJE: winder and planner.
Compound : -WINDER to coils:
Capacity 2000 Kgs.
-PLANNER:
Plate width 400 mm,
Plate thickness 4mm.
8. Compressor CECCATO RL-100 -
with dryer and boiler,
Nominal power 75Kw/100CV,
Working press 10bar,
DRYER CHANLED CI,
BOILER,
Capacity 1500L,
Press 10bar.
9. Electroerosion ONA NOVA PROGRAM 60, with CNC.
Table 500x40 mm.
Capasity 60A mps.
10.Welding robot of 8 axes ABB R9OL010.
11. Bridge crane PIMEG, 15Tn.
Birrail,
Capacity 15Tn,
Light 14900 mm.

Good working condition Photo
72 MA18717 Beaver Milling Machine

Bridgeport Milling Machine

Herbert 7 (With Tooling)

Keetona Hand Folder

Laycock 60 Ton Hydraulic Press

Hunt Drill Point Grinder

Cridan High Speed threading Machine
Good Condition Photo
73 MA18705 1 off KTM 4 Axis Portal milling machine.

X Axis movement. 12,791mm.

Y Axis movement. 2,589mm.

Z Axis movement. 400mm.

2 off 40 Int vertical spindles.

DC spindle drives.

Machine control is Alan Bradley 8600 Osai.



1 off Forest 3 Axis Portal milling machine.

X Axis movement. 14,300mm.

Y Axis movement. 1,199mm.

Z Axis movement. 502mm.

2 off 40 Int vertical spindles.

DC spindle drives.

Machine control is Alan Bradley 8600 Osai.



Good Condition Photo
74 MA18704 Bonardi 2 plano miller in lot . both machines in good condition .



1 )



Plano miller



Make Bonardi



Table 1700 X 6000 MM



Between column 2000 mm



2 MILLING HEADS , 2 PLANNING HEAD .



NC AND DRO. Spindle motor DC . 20 KW . spindle 740 RPM , iso 50 .





2)



Bonardi



Table 850 x 4300 mm .



Between column 1200 mm



1 milling head , 2 planning head .



In accessories 1 milling head , 1 planning head .



Machine equipped with DRO and positioner
Good Condition Photo
75 MA18639 1) Knuckle Joint Press Smeral LL1000. 2) Trimming Press Erfurt 500 tons. Good Condition Photo
76 MA18446 1. CNC-Gear Grinding Machine -
Make :HOEFLER-BHS
Type: CNC-SUPRA 1603.
Year :1989/2000.
Wheel diamter max.: 2000 mm,
Gear width : 720 mm,
Module: 2 - 25,
Weight appr. : 26000 kg.
- Latest accuracy reached: Quality 3.
- HÖFLER SUPRA-CNC-Dialog- programing D-Supra.
- CNC-dressing device.
- Automatic grinding wheel balancing device and much more.
2. CNC-Gear Grinding Machine -
Make : NILES.
Type-ZSTZ 12 CNC
Year-1993.
Wheel diameter max. :1250 mm,
Gear width : 1200 mm,
Module : 2 - 25,
Weight: 32000 kg.
- CNC- program control IBH MACRO 50.
- table overhaul in 2005.
- 1 additional overhauled grinding spindle.
- Counter-stay.
- CNC-dressing device and much more.
- Latest accuracy reached: Quality 4 - 5.




completely overhauled Photo
77 MA18266 Reishauer Complete Set of Reishauer zb.
Reishauer ам 10.
correct machine tool am 10 for grinding шнеков 1989
Reishauer type ds of 1989
Reishauer hofmann
The counterbalancing machine tool.
Min dia. circles of legs of teeths 34 mm,
Max dia. circles of ledges of teeths 700 mm,
Max stroke a sled 290 mm,
Min distance centre to centre 255 mm,
Max distance centre to centre 570 mm,
Max weight of products (including fastening means) 300 kg.
Min number of teeths 16,
Max number of teeths (Placing conditions how much allow Spare wheels, can be ground also and Gear wheels with the big number of teeths) 280,
Min step FASHIONS 0,5; (DP 48)
Max step:
- With dobble step worm wheel FASHIONS 3,5; (DP 7),
- With one step worm wheel FASHIONS 7 (DP 3.5),
Min egde gearings10,
Max egde gearings 45,
Max egde an inclination of a slanting tooth (from two parties)
(Details see section 6/F) 30,
Profile updating Head/leg cut
Camber on height
Camber on width
The sizes grinding worm wheel
- Min. dia 280 mm,
- Max dia 400 mm,
- Width 84/104 mm,
Product giving:
- On a turn, stepless 0,6-3 mm,
Autom. giving grinding worm wheel
- On раб.ход, step by step 0,01-0,08 mm,
- The general 1,2 mm,
Withdrawal
- At product change 60 mm,
Tangetial.movement:
- Manually - the greatest 80 mm,
Number of turns of grinding spindle 1650 rpm.,
Good Condition Photo
78 MA18242 1) Borer Horizontal Floor Type - Make : Collet - Model : WF150 - YOM : 1958, Spindle dia : 150 mm, X travel : 4500 mm, Y travel : 2600 mm, Z travel : 1400 mm. 2) Borer Horizontal Floor Type - Make : Collet, Model : WF150, YOM : 1952, Spindle dia. 150 mm, X travel : 3000 mm, Y travel : 2200 mm, Z travel : 1400 mm. Both the machines are equipped with Floor Plates. 1 Rotary Table is available along with the machine. Dismantled Photo
79 MA18093 1) Komatsu Hydraulic Servo Press, HAF-160, 1997
Stroke Length 250mm.

2) Amada Press, TP80X, 1981
with Die Cushion
36-75spm, Stroke Length 127mm.

3) Amada PRess, TP45C, 1983
60spm, Stroke Length 140mm.

4) Aida Press, NC1-45, 1993
50-95spm, Stroke Length 120mm.

5) Aida Leveler Feeder, LFT-300E, 1993
Sheet Width: 50-300mm, Sheet Thickness 0.3-2.3mm.

Good Condition Photo
80 MA17778 2 Lasers :Trumph + Bystronic .Model Trumatic L 3030
Laser Tlf 3000 T.
It Is In Same Place With The Bystronic (1998)
Excellent Photo
81 MA17699 Very good condition Photo
82 MA17678 Smeral,Czech Vertical forging press SMERAL LZK 1600 P, 1979
- Nominal force: 16000 kN
- Ram strokes: 85 /min.
- Passage: 1230 mm
- Shutheight: 760 m
- Ram stroke: 280 mm
- Ram adjustment: 10 mm
- Ram clamping surface: 1000x920 mm
- Table clamping surface: 1180x1200 mm
- Max. stroke of upper ejector plug: 40 mm
- Max. stroke of lower ejector plug: 60 mm- Main engine power: 75 kW- Dimensions LxWxH1/H2: 2840x2980x550/430
- Weigth: 85000 kg
2. 1980 Crankshaft trimming press SMERAL LKO 315- Nominal force: 315 Mp
- Work travel: 3,5 mm
- Ram strokes: 30 /min.
- Usable strokes: 15 /min.
- Passage: 1250 mm
- Shutheigth: 530 mm
- Ram stroke: 180 mm
- Ram adjustment: 115 mm
- Ram clamping surface: 1100x600 mm
- Table clamping surface: 1250x800 mm
- Table gap: 900x400 mm
- Main engine power: 20 kW
- Press dimensions LxWxH: 2400x1700x4535 mm
- Press weigth: 17000 kg

3. ITO 630 kW induction heating device with separator


Good Condition Photo
83 MA17354 Okuma,Japan Machining Center Horizontal : 1. OKUMA MA60HB- YOM : 1999, U-100M Control, 2 APC, 60 ATC, 10.000 rpm, BT-50 taper,1° indexing, power on 43.000 hours, NC-function 22.000, Spindle hours 15.500.
2. OKUMA MacTurn 30 - YOM : 2001, U-100L Control, Tailstock, Hobbing function, BT-40 taper.



Good Condition Photo
84 MA17310 desk plate 1885 x 5600
rotary table e-20
under power
+ Gear hobbing machine FO 6

Good Condition Photo
85 MA17211 1) Kotobuki Planomiller OPM1111 3000 x 1600 x 970 mm .
2 ) Okuma NC Borer MDS-13N 1800 x 1300 x 1000 mm

3 ) Makino Graphite Machine SNC 86 800 x 600 x 400

4 ) Ogawa Radial Borer HOR-D 1400 mm

5 ) Okuma Vertical Machining MC6VE 1500 x 610 x 610 mm

6 ) Kuraki Combination Milling CM601 2500 x 1000 x 1500

7 ) Nippei Horizontal Grinder CX90-180 1800 x 900 x 800

8 ) Hitachi Bandsaw 3NE300 340 x 125

9) Nagasei NC Lathe 3NE300 340 x 125 mm

10) Makino EMD Machine EDNC85A 800 x 500 x 300

11) Makino EMD Machine EDNC64 600 x 400 x 250

12) Mitsubishi Wire Cut DWC110 450 x 300 x 200. Containers required will be 6 x 40ft containers, 1 x 40ft OT container and 1 x 20ft flat rack container.









Very good condition Photo
86 MA17186 Motor Shaft Production Line :-
Line composition:
1. Bar Feeder
Make : Alps, Model: PFS-V1S, New: 1995
3000mm Length

2. CNC Automatic Lathe:
Make : Tsugami, Model: BS-20B, New: 1995
Control, Fanuc LA1,
Max. Processiing Dia x Length: 20mmdia. x 210mm,
No. of CNC Controlled Axis: 5.

3. CNC Automatic Grinder:
Make : tsugami, Model: G18SB, New: 1995.
Control: Tsugami Meldas GA-1,
Grinding Center Distance: 250mm,
Grinding Max. Swing : 180mm,
Workpiece Size: 355x50x127mm.
Good Condition Photo
87 MA17158 1. TRAUB Vertical Machining Centre:-
Model: TVC200P with twin pallets.
Year: 1993.
Control: FANUC OM.
Travel XYZ: 400x300x400 mm,
Toolchanger: 16 atc,
Max.spindle speed: 8000 rpm,
Main motor: 5.5kW.
2. YANG Vertical Machining Centre :-
Model: EAGLE 600.
Year: 1997.
Control: FANUC OM,
Table: 750x360 mm,
Travel XYZ: 600x410x510 mm,
Toolchanger: 16atc,
Max.spindle speed: 8000rpm,
Complete with NIKKEI 4th-axis.
3. GROB Thread rollers :-
2 machines available with lot of NEW and barely used tooling
Model: RM28.
Good Condition Photo
88 MA16783 1. VTL - Niles Model: DKZ 2500x1250В-
Diameter of a faceplate - 2240 mm,
The max. work piece diameter- 2500 mm,
The max. depth of drilling - 1120 mm,
The max. distance between a faceplate and the bottom edge of the cutter holder- 1325 mm,
The max. distance between the center of a faceplate and a lateral support - 125 mm,
The max. distance between faceplate and the bottom edge of cross-section traverse - 1535 mm,
The max. work piece weight- 10 t,
The max. vertical travel of cutter- 1120 mm,
The max. horizontal travel of cutter-1475mm.
2. VTL - Sedin Russia - 1532 -
Table diameter 3080 mm,
Work piece maximum ton weight 20000 kg,
Work piece maximum height 2000 mm,
Work piece swing with side tool box 3200 mm,
Work piece swing without side tool box 3400 mm,
Chuck speed 1,25.63 rpm,
Main electric motor power 55 kW,
Machine overall dimensions 5490 x 6540 x 5100 mm,
Machine weight 70000 kg.

Good Condition Photo
89 MA16781 Maho MAHO MH 500 C
++
MAHO MH 700 C
Good Condition Photo



G-59/60, E Block, Simla House, Nepean Sea Road, Mumbai 400036. India.
Phone : +91-22-66644462 /63 /69     Fax : +91-22-23690034
E-mail : info@nvmachinery.com / info@machineworld.in