Machine Category : Sheet Metal
Sub - Category : Press Sheet Stamping Mechanical
+ Advance Filter
MAKE
MODEL
CAPACITY TONS from to
TABLE SIZE MM
STROKE MM from to
Total machines found : 522
Sr. ID Make Model Description YOM Condition Photo Enquire
1 MA27328 Manzoni 2MR Capacity : 630 ton,
Ram : 3200 x 1700 mm,
Ram Stroke : 315 mm,
Speed : 10-75 min,
Cushion upper :-
capacity : 26 t,
Course : 80 mm,
Dimensions : 2100 x 1000.
1997 Good Condition Photo
2 MA27327 Rovetta,Italy Capacity : 500 ton,
Stroke of the slide : 305 mm,
Stroke per minute : 15-30,
Adjustment of the slide : 300 mm,
Shut height : 900 mm,
Distance between uprights : 3400 mm,
Dimensions of bolster (L-R x F-B) : 3350 x 2130 mm,
Dimensions of slide (L-R x F-B) : 3350 x 2130 mm,
Opening in the bed : 3 n,
Thickness of bolster : 510 mm,
Openings per K.O bars : 6 n,
Opening in the uprights : 2180 x 1435 mm,
Main motor : 82 x 1800 kW,
Adjustment motor of the slide : 7,5 kW.
Good Condition Photo
3 MA27326 Innse Clearing S4-500-144-84 Capacity : 500 ton,
Ram Stroke : 254 mm,
Ram dia : 3762 mm,
Table dia : 3938 mm,
No of Strokes : 18-55,
Motor Power : 110 Hp.
1981 Good Condition Photo
4 MA27317 Mossini PDM/4B/LD1000 Capacity : 1000 ton,
Stroke : 800 mm,
Stroke of the nominal : 16,5 force,
Speed : 6-25 SPM,
Slide adjustment : 250 mm,
Shut height : 1200 mm,
Bed size : 4900 x 2100 mm,
Max weight allowed on bed : 110 kN,
Cushion capacity : 1000 kn,
Cushion stroke : 250 mm.
With 2 moving bolster,
With 3 axis transfer system.
2006 Good Condition Photo
5 MA27314 Ravne,Germany Capacity: 500 ton,
Table size: 2800 x 1600 mm,
The lowest transition columns: 3000 mm,
Stroke: 400 mm,
Adjustment ram: 300 mm,
Stroke per min: 14,
Main engine: 37 kW,
Cushion stroke: 200 mm,
weight: 100 ton.
1970-1980 Very good condition,Under power Photo
6 MA27312 Verson TS2-2500-240-54 Capacity : 2500 ton,
Bed area : 6000 mm x 1350 mm,
Slide area : 6000 mm x 1800 mm,
Stroke : 550 mm,
Adjustment : 250 mm,
Shut Height : 1525 mm over bed SDAU,
Stroke per minute : 8-20,
Windows : 1900 mm wide,
Rolling bolster : 650 tall.

Equipped With :-
Air Clutch and Brake,
Air Counterbalances,
(6) Cushions-Capacity 20 Tons Each,
8 Point Gibbing,
Recirculating Lube System,
T-Slotted Ram and Bolster,
Rolling Boster F-B- 650 mm tall,
Hydraulic Overloads,
Hydraulic Tie Rod Nuts,
Recirculating Lube System,
Motors and Controls.
Qty : 2 nos.
Good Condition Photo
7 MA27311 Verson SE4-1600-180-72 Capacity : 1600 Tons,
Bed Area : 4500 x 1800 mm,
Slide Area : 4500 x 1800 mm,
Stroke : 400 mm,
Adjustment : 250 mm,
Shut Height : 1800 mm over bed SDAU,
Strokes per Minute 15-30,
Windows : 1375 wide,
Bolster : 300 mm thick approx.
Overall Height : 7400 mm floor to highest point of press
Overall Weight : 645,000 # approx.
Equipped With :-
Air Clutch and Brake,
Air Counterbalances (2),
Knockouts in Slide Assembly,
Recirculating Lube System,
8 Point Gibbing,
T-Slotted Ram and Bolster,
Hydraulic Tie Rod Nuts,
Hydraulic Overloads,
Single Rolling Bolster (F-B),
Motors and Controls,
No Cushion.
Qty : 3.
Good Condition Photo
8 MA27309 Benelli PE2M400-2500-1500-4 Capacity : 400 ton,
Slide stroke : 410 mm,
Stroke X minute 16 min,
Hydraulic overload,
Shut height : 850 mm,
Bed size : 2500 x 1500 mm,
Bed cushion stroke : 160 mm,
Bed cushion capacity : 95 ton (3 number),
Power of main motor : 50 kW,
Height above floor of table : 600 mm,
Max height above floor : 6105 mm,
Height below floor : 1290 mm,
Overall dimensions : 3810 x 2438 x 7395 mm,
Press weight about : 60 ton.
1963/1995 Good Condition Photo
9 MA27308 Ambrogio Galli 25MTL205-120-20 Capacity : 250 ton,
Slide stroke : 200 mm,
Stroke X minute variable max 36 min,
Hydraulic overload,
Shut height : 850/1050 mm,
Slide adjustment : 120 mm,
Bed size : 2050 x 1200 mm,
Slide area : 2050 x 1000 mm,
Upright opening : 700 mm,
Power of main motor : 22+2 kW,
Height above floor of table : 800 mm,
Max height above floor : 4545 mm,
Press weight about : 30 ton,
Overall dimensions : 3630 x 1950 x 4545 mm,
PLC omron : C60H,
Recirculation lubrification oil,
Speed variation DC motor.
Loading arms mold.
1994/2005 Good Condition Photo
10 MA27289 WMW Erfurt,Germany PKZVIII5001.FS 500 tons, slide stroke 500 mm, strokes x minute 20 min, hydraulic overload, shut height 1200 mm, slide adjustment 400 mm, bed size 3150 x 2100 mm , moving bolster front to back, slide area 3150 x 2100 mm , upright opening 2200x1670 mm, bed cushion stroke 200 mm, power of main motor 75 kw, max height above floor 7500 mm, press weight about 129 ton 1982/Installed 1984 Excellent condition,under power Photo
11 MA27288 AIDA,Japan C1-15-2B Press capacity : 150 ton,
Stroke length : 200 mm,
Stroke per minute : 30 - 55 S.P.M,
Slide area : 700 x 580 mm,
Bolster area : 1220 x 760 mm,
Slide adjustment : 100 mm,
Die height : 400 mm,
Material of frame : Steel,
Motor power : 11 Kw.
1985 Good Condition Photo
12 MA27284 WMW Erfurt,Germany PKZV800FS Capacity : 800 ton,
Ram stroke : 500 mm,
Number of ram stroke min : 10-20 spm,
Bed to bolster plate adjustment : 500 mm,
Shut height : 1350 mm,
Size of bed : 4000 x 2500 mm,
Size of ram : 3950 x 2500 mm,
Gap size of table : 3520 x 2500 mm,
Cushion power on table : 1600 kn,
Table ejector (cushion) : 200 mm,
Main drive motor power : 90 kW,
Height above floor level approx : 8400 mm,
Machine Weight : 220 ton.
1983 Retrofitted 2005 Excellent condition,under power Photo
13 MA27266 Wilkins & Mitchell D84-2-14 Capacity : 200 ton,
Stroke : 355 mm,
Working speed : 15 mn,
Distance between uprights : 2150 mm,
Table area : 2134 x 1067 mm,
Ram surface : 2134 x 1067 mm,
Distance between table and ram : 380/635 mm,
Motor : 30 cv,
Dimensions of machine : 3000 x 2000 x 6500 mm,
Weight of machine : 32000 kg.
Accessories :-
capacity : 40 ton,
stroke : 178 mm,
Bottom ejector,
Good Condition Photo
14 MA27243 TMP Voronezh Russia K3535A 315 tons, ram stroke 400 mm, 25 SPM , shut height 750 mm, bed to ram adjustment stroke 250 mm, bed dimensions 2500 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 47 kW , overall dimensions 4555 x 2900 x 6850 mm, mass 50.9 tons. Good Condition Photo
15 MA27242 WMW Erfurt,Germany PKZVIII500FS Centres of pressure : 4,
Capacity : 500 tons,
Stroke of slider : 500 mm,
Adjustment of slider : 500 mm,
Max. daylight betwen bolster and slider SDAU : 1200 mm,
Distance between columns : 3200 mm,
Slider area : 3150 x 2100 mm,
Bed area : 3150 x 2100 mm,
Opening in bed : 2500 x 1600 mm,
Main motor power : 75 kW,
Cushion force in bed : 100 tons,
Stroke of cushion plate : 200 mm,
Height above the floor : 7600 mm,
Weight : 140 tons.
4 Crankshafts,
1973 Good Condition Photo
16 MA27225 WMW Erfurt,Germany PEEI400 Nominal pressure : 400 ton,
Strokes per minute : 32,
Adjustment stroke : 40-140 mm,
Throat : 400 mm,
Bed area : 1250 x 750 mm,
Ram area : 800 x 630 mm,
Slide adjustment : 125 mm,
Distance bed to slide : 450 mm,
Main power motor : 30 kW,
Machine dimensions : 3700 x 1600 x 3500 mm,
Machine weight : 25 ton.
Good Condition Photo
17 MA27223 WMW Erfurt,Germany PKZZ1000/4000 Capacity : 1000 ton,
Stroke : 500 mm,
Adjustment : 210 mm,
Table surface : 4000 x 2200 mm,
Cushion in bed : 60 ton,
Minimum working height : 1065 mm,
Maximum working height : 1264 mm,
With moving bolster,
With die cushion,
With hydraulic over load system
Good condition,under power Photo
18 MA27220 AIDA,Japan PDM30 Capacity : 300 ton,
Stroke length : 450 mm,
Stroke : 14 spm,
Die height : 675 mm,
Bolster size (L.R. x F.B.) : 2130 mm x 1370 mm,
Bolster thickness : 170 mm,
Slide area (L.R. x F.B.) : 1900 x 1200 mm,
Slide adjustment : 200 mm,
Main motor : 2.0 kw x 4p,
Adjustment motor : 3.7 kw x 4P,
Knockout capacity : 1 ton,
Knockout stroke : 225 mm,
Bed hole area (L.R x F.B) : 840 mm x 910 mm x2,

Cushion model : CA-30 M,
Capacity (5 kg.cm2) : 50 ton,
Effective stroke length : 300 mm,
Area of pad (L.R x F.b) : 810 mm x 880 mm x2
1970 Good Condition Photo
19 MA27219 AIDA,Japan PD-ST-GT-300M Capacity : 300 ton,
Stroke 8,12 spm,
Stroke length : 600 mm,
Ram adjustment : 200 mm,
Ram size (L.R X F.B) : 1900 x 1000 mm,
Bolster size (L.R x F.B) : 2100 x 1350 mm,
Ram to bolster (adjust up stroke down) : 170 mm,
Air pressure : Clutch 3 kg.cm2,
Balance 4 kg/cm2,
Main motor : 30 kw x 6 P,4P
Ram adjustment motor : 3.7 kw x 4P,
Cushion capacity : 71 ton,
Air pressure : 5 kg/cm2,
Length of stroke : 300 mm,
Area of pad (L.R. x F.B) : 1800 x 800 mm.
1970 Good Condition Photo
20 MA27196 WMW Erfurt,Germany PKZVI1250FS 1250 tons , number of connecting points of ram 4 , drawing device capacity 350 tons , ram stroke 630 mm , ram adjustment 630 mm , 11 SPM , table area 4000 x 2500 mm , slide area 4000 x 2500 mm , distance between columns 4050 mm , shut height 1250 mm , opening in bed 3320 x 1540 mm , cushion capacity 250 tons , cushion stroke 0-250 mm , ejection force 40 tons , overload protection 40 tons , main drive 132 kW , height above floor 9700 mm , moving bolster, pneumatic cushion and overload protection. Good condition,under power Photo
21 MA27150 TMP Voronezh Russia K3535A 315 tons, ram stroke 400 mm, 25 SPM , shut height 750 mm, bed to ram adjustment stroke 250 mm, bed dimensions 2500 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 47 kW , overall dimensions 4555 x 2900 x 6850 mm, mass 50.9 tons. Good Condition Photo
22 MA27144 Verson Capacity : 600 ton,
Bed : 2000 x 1400 mm,
Slide stroke : 600 mm,
Stroke adjustment : 400 mm,
Max. shut height : 800 mm,
Max stroke : 20 min,
L x W x H : 8 x 6 x 9 m,
Quantity : 4 nos.
Good Condition Photo
23 MA27129 TMP Voronezh Russia K3540 1000 tons, ram stroke 400 mm, SPM 20, shut height 1060 mm, adjustment 320 mm, ram dimensions 3150 x 1700 mm, bolster plate thickness 260 mm, height above floor level 7830 mm, main motor power 132 kW, dimensions 5150 x 4700 mm, weight 193 tons. Good Condition Photo
24 MA27124 Verson S2-800-108-72 Capacity : 800 ton,
Stroke : 400 mm,
Shut Height : 1200 mm,
Adjustment : 250 mm,
LR x FB Bed Area : 2700 x 1800 mm,
LR x FB Slide Area : 2700 x 1800 mm,
Stroke per minute : 18,
Equipment and Features :-
Air Clutch and Brake,
Air Counterbalances,
Recirculating Lube System,
T-Slotted Bolster,
Knockouts in Slide Assembly,
Dual Herion Valve,
Thick Bolster Plate approx : 200 mm,
Wide Windows : 900 mm,
Hydraulic Tie Rod Nuts,
Trabon Recirculating Lubrication System,
8 Point Gibbing,
Palm Button Stand,
Motors and Controls,
Panel View 550 Allen Bradley,
Air Cushions,
Capacity : 57.3 Tons at 100 PSI,
Travel : 200 mm,
Qty : 2 nos.
Good Condition Photo
25 MA27110 WMW Erfurt,Germany PKZVIII500FS Centres of pressure : 4,
Capacity : 500 tons,
Stroke of slider : 500 mm,
Adjustment of slider : 500 mm,
Max. daylight betwen bolster and slider SDAU : 1200 mm,
Distance between columns : 3200 mm,
Slider area : 3150 x 2100 mm,
Bed area : 3150 x 2100 mm,
Opening in bed : 2500 x 1600 mm,
Main motor power : 75 kW,
Cushion force in bed : 100 tons,
Stroke of cushion plate : 200 mm,
Height above the floor : 7600 mm,
Weight : 140 tons.
4 Crankshafts,
3 units.
Good Condition Photo
26 MA27006 Chin Fong,Taiwan G2-250 Press Capacity : 250 ton,
Stroke length : 280 mm,
Stroke per minute : 20 ~ 35 spm,
Die Height : 550 mm,
Slide adjustment : 120 mm,
Slide area : 2100 x 700 mm,
Bolster area : 2700 x 900 mm,
Frame type C,
Material of frame steel,
Weight of machine : 40.3 ton.
2004 Good Condition Photo
27 MA26940 WMW Erfurt,Germany PKZZIII250.1FS 250 tons,stroke 160mm,no.of strokes 20-25 per min., moving (front -back) table dimensions 2500 x 1250mm, slide stroke 400mm, drawing depth 160mm, slide dimensions 2500 x 1250mm, table opening 2100 x 850mm, slide adjustment 250mm, shut height 800mm, ejectors stroke 160mm, tables cushion capacity 50 tons,distance between columns 2500mm,main motor power 45kW, Length 4650,Width 3600mm,Height 11250mm,Weight 64.5 Tons, Moving Table,2 x 20'''' and 2 x 40'''' opentops needed 1983 working condition ,under power Photo
28 MA26932 WMW Erfurt,Germany PKZVIII500FS Capacity : 500 tons,
Stroke of slider : 500 mm,
Adjustment of slider : 500 mm,
Max. daylight between bolster and slider SDAU : 1200 mm,
Distance between columns : 3200 mm,
Slider area : 3150 x 2100 mm,
Opening in bed : 2500 x 1600 mm,
Main motor power : 75 kW,
Cushion force in bed : 100 tons,
Stroke of cushion plate : 200 mm,
Height above the floor : 7600 mm,
Weight : 140 tons.
With moving table
Excellent condition,under power Photo
29 MA26928 Aizawa AC1-20N3 Press capacity : 200 ton,
Stroke length : 250 mm,
Stroke per minute : 25~45,
Die height : 450 mm,
Slide adjustment : 100 mm,
Slide area : 800 x 600 mm,
Bolster area : 1420 x 840 mm,
Spindle drive motor : 15 x 4p kW.
1988 Good Condition Photo
30 MA26896 Komatsu OBS80 Press capacity : 80 ton,
Stroke length : 130 mm,
Stroke per minute : 37~75,
Slide area : 550 x 400 mm,
Bolster area : 900 x 600 x 90 mm,
Slide adjustment : 80 mm,
Die height : 350 mm,
Frame type : C,
Material of frame : Steel,
Motor power : 7.5 kW,
Net weight : 6.0 ton,
Dimensions (L x W x H) : 1.9 x 1.5 x 3.1 mm
1978 Good working condition Photo
31 MA26879 Raskin Capacity : 800 tons,
Bed area : 3500 mm x 1880 mm,
Slide area : 3500 mm x 1880 mm,
Stroke : 508 mm,
Shut height (min) : 280 mm,
Shut height (max) : 890 mm,
Distance between gibs : 3400 mm,
Feed height from top of bolster : 355 mm,
Bolster thickness : 254 mm,
Speed : 0-20 spm,
No of cushions 2,
Cushion capacity : 48 tons,
Cushion stroke : 250 mm.
1980 Good Condition Photo
32 MA26851 Amada,Japan TP110 Capacity : 110 ton,
Stroke speed : 60 SPM,
Stroke length : 152 mm,
DH : 420 mm,
Slide adjustment : 100 mm,
With automatic adjustment slide.
1975 Good Condition Photo
33 MI6031 Smeral,Czech C frame press,
Capacity : 250 tons,
Bed size : 1120 x 780 mm,
Bed to ram : 550 mm,
bed bore : 350 mm,
Bed plate thickness : 100 mm,
Stroke per minute : 45,
Stroke length : 200 mm (adjustable).
Good Condition Photo
34 MA26793 Danly S4-800-132-84 Capacity : 800 ton,
Stroke : 600 mm,
Bed : 3300 x 2100 mm,
Stroke per minute : 14 (continuous) / 11 (single),
Shut height : 1525 mm,
Adjustment : 500 mm,
With cushion,
Qty : 6 nos.
Good Condition Photo
35 MA26792 Clearing FS4-180-100 Capacity : 600 ton,
Stroke : 925 mm,
Bed : 4500 x 2500 mm,
Stroke per minute : 8, (can be increased)
Shut height : 2000 mm, (can be modified to suit)
Adjustment : 150 mm.
Good condition,under power Photo
36 MA26791 Bliss Capacity : 650 ton,
Stroke : 600 mm,
Bed : 3100 x 2000 mm,
Shut height : 1250 mm,
Adjustment : 700 mm,
Stroke per minute : 11,
Good condition,under power Photo
37 MA26790 Danly S4-500-144-90 Capacity : 500 ton,
Stroke : 600 mm,
Bed size : 3600 x 2250 mm,
Shut height : 1737 mm,
Adjustment : 375 mm,
Stroke per minute : 14,
Windows : 600 x 1250 mm,
With cushion.
Very good condition Photo
38 MA26774 Ravne,Germany DE400-G-52 Capacity : 400 ton,
Table size (front moving bolster) : 2749 x 1524 mm,
Table height : 480 mm,
Stroke : 600 mm,
Adjustment : 350 mm,
Speed : 20 ,
Daylight : 980 mm,
Weight : 125,000 Kg,
Cushion capacity : 2 x 38 ton,
Cushion stroke : 200 mm,
Overall dimensions : 4500 x 3000 x 6800 mm,
Press with Moving bolster, Cushions and Hydraulic Overload System.
Quantity : 12 nos.
1980/1981 Good Condition Photo
39 MA26772 AIDA,Japan Capacity : 500 tons,
Stroke length : 250 mm,
Slide Adjustment : 440 mm,
Shut Height : 1250 mm,
SPM (without load) : 15 - 45,
Bed Area : 3650 x 2140 mm,
Slide Area : 3360 x 2140 mm,
Side opening : 2000 mm,
Motor power : 49 kW.
1983 working condition ,under power Photo
40 MA26769 FMI Mecfond S4-450-3350X2160 Capacity : 450 ton,
Stroke : 610 mm,
Adjustment : 203 mm,
Table size (front moving bolster) : 3350 x 2160 mm,
Table height : 420 mm,
Speed : 16,
Daylight : 1219 mm,
Weight : 140,000 Kg,
3 with cushions,
Overall dimensions : 5200 x 3100 x 6000 mm,
Press with moving bolster, cushion and HOS.
Quantity : 5 nos.
1983 Good Condition Photo
41 MA26765 FMI Mecfond S4-900.4572x2438 Capacity : 900 ton,
Stroke : 940 mm,
Adjustment : 762 mm,
Speed : 16 mm/min,
Daylight : 2228 mm,
Table dimensions : 4572 x 2438 mm,
Weight : 260,000 Kg,
Cushion : 3 x 64 ton,
Cushion stroke : 305 mm,
Overall dimensions : 7000 x 3200 x 8000 mm.
With HOS & Front Moving Bolster.
Qty : 5 Presses
1979 Good Condition Photo
42 MA26760 Clearing Capacity : 800 tons,
Strokes : 6 min,
Plate : 3200 x 2000 mm,
45 kw,
Plate adjustment 180 mm.
Good working condition Photo
43 MA26710 TMP Voronezh Russia KB3539 Capacty :800 tons , table dimensions 2500 x 1600 mm, stroke 320 mm, 25SPM , shut height 650 mm, ram adjustment 320 mm, ram dimensions 1400 x 400 mm, tool cushion Capacity 80 tons, cushion stroke 90 mm, upper ejector capacity 40 tons , main motor power 90 kW, dimensions 4200 x 4860 mm, height above floor level 6410 mm, weight 97600 kg 1969 Photo
44 MA26676 Fuji FSP1-2000 CS Presses Capacity : 200 ton,
Controlled with NC,
Quantity : 5 units
New in 2005 Excellent Photo
45 MI6012 Automa Japan AC1-15L Capacity - 150 Tons,
Stroke - 200 mm,
Bed Size - 1250 x 700 mm,
RAM - 700x 500 mm,
Die Height - 450 mm,
Stroke per minute - 45,
Adjustment - 100 mm,

Accessories
Lube Tank, Air Filter,Main Motor, Clutch Filter,
2 Sensing Scale.

Other Details (Approx)
Power Required : 220V/15KVA / Phase : 3
Air Required : Bar
Working Space : F-B : 7'-6", L-R : 5', HT : 11'-6"
Net Weight : 15 Tons,
'C' frame press
Good Condition Photo
46 MI6011 Wasino,Japan PUX150L Capacity - 150 Tons,
Stroke - 200 mm,
Bed - 1440 x 630 mm,
RAM- 670 x 500 mm,
Die Height - 400 mm,
Adjustment - 90 mm,
Stroke per minute - 40,

Accessories
Main Motor, Air Filter.

Other Details (Approx)
Power Required : 220V /12KVA / Phase : 3
Air Required : Bar
Working Space : F-B : 7'-7", L-R : 4'-8", HT : 12'-6"
Net Weight : 15 Tons
'C' frame press.
Good Condition Photo
47 MI6010 Yodagawa Japan PUX V-75C Capacity -75 Tons,
Stroke - 20-130 mm,
Bed -1000 x 600 mm,
RAM -550 x 400 mm,
Die Height -500 mm,
Adjustment -75 mm,
Stroke per minute - 60,

Accessories
Lube Tank, Air Filter, Main Motor & Clutch Filter.

Other Details (Approx)
Power Required : 220V / 5.5KVA/ Phase : 3
Air Required : Bar
Working Space : F-B : 1800, L-R : 1200, HT : 3000
Net Weight : 7.5Tons,
'C' frame press.
Good Condition Photo
48 MI6009 AIDA,Japan PC15(1) Capacity : 150 tons,
Stroke : 125 mm,
Bed : 1240 x 750 mm,
Ram : 670 x 500 mm,
Die height : 422 mm,
Stroke per minute : 45,
Adjustment : 85 mm,

Accessories :
With die cushion & manually slide adjustment, air filter, main motor ,

Other details (approx)
Power required : 220 V/ 11KVA/phase : 3,
Air required : Bar,
Working space : F-B : 7'-3",LR : 4'-7", HT : 14"
Net weight : 15 tons.
'C' frame press
Good Condition Photo
49 MA26671 WMW Erfurt,Germany PKZZI1250 1250 tons , table dimensions 4000 x 1800 mm ,max. drawing depth 250 mm, table opening 3750 x 1300 mm, ram dimensions 3950 x 1800 mm , shut height 1165 mm , stroke 630 mm , adjustment 630 mm , 11 SPM , main motor power 132 kW , distance between columns 4000 mm , ejector capacity 40 tons, drawing depth adjustment 250 mm, Total weight 215 tons, Cushion capacity : 250 Tons, Cushion stroke : 250 mm, Quantity : 2 nos. 1984 Good Condition Photo
50 MA26646 TMP Voronezh Russia K4039 Capacity : 800 ton,
Ram Stroke : 800 mm,
Number of ram stroke : 20 spm,
Shut height : 1400 mm,
Bolster plate to ram adjustment : 500 mm,
Bed dimensions : 4000 x 2240 mm,
Ram dimensions : 4000 x 2240 mm,
Bolster plate thickness : 250 mm,
Main power drive : 132 kW,
Press dimensions : 6360 x 5250 x 8950 mm,
Press Weight : 257 ton.
1978 Good condition,under power Photo
51 MA26603 Komatsu E2G400-3BM Capacity : 400 tons,
Stroke per min : 12-25,
Stroke length : 600 mm,
Bolster : 2500 x 1550 x 190 mm,
Die cushion, Die height : 900 mm.
New in 2004 Photo
52 MA26595 TMP Voronezh Russia KA3540 1000 tons, ram stroke 400 mm, SPM 20, shut height 1060 mm, adjustment 320 mm, ram dimensions 3150 x 1700 mm, moving table dimensions 3150 x 1800 mm, bolster plate thickness 260 mm, height above floor level 7830 mm, main motor power 132 kW, dimensions 5150 x 4700 mm, weight 193 tons. 1990 Good Condition Photo
53 MA26566 Natori,Japan NC-S2-4 Capacity : 400 ton,
Stroke : 450 mm,
Stroke per minute : 14,
Adjust : 450 mm,
Die height : 850 mm,
Bolster : 2500 x 1500 mm,
Die cushion : 75 tons x 2,
Cushion stroke : 250 mm,
Pad Area : 1040 x 1140 mm,
Main motor : 37 Kw, 4P.
1960s Crca Good condition,under power Photo
54 MA26507 Komatsu Capacity : 400 ton,
Stroke : 500 mm,
Stroke per minute : 10-16,
Bolster : 2500 x 1700 mm,
Slide : 2500 x 1676 mm,
Shut height : 1400 mm,
Adjust : 500 mm,
Cushion : 100 tons,
Cushion stroke : 230 mm,
Cushion pad : 2000 x 1143 mm.
Good Condition Photo
55 MA26503 Kurimoto,Japanese Capacity : 350 ton,
Stroke : 400 mm,
Die height : 1000 mm,
Adjust : 350 mm,
Stroke per minute : 18,
Bolster : 2800 x 1650 mm,
Slide : 2600 x 1400 mm,
Cushion : 100 tons,
Cushion stroke : 200 mm,
Cushion pad : 1215 x 1240 mm x 2.
Good Condition Photo
56 MA26481 AIDA,Japan PL2-40-2MF Capacity : 400 tons,
Stroke : 500 mm,
Stroke per minute : 10 - 20,
Moving Bolster : 3000 x 1600 mm (Forward Movement),
Slide : 3000 x 1600 mm,
Die Height : 1000 mm,
Adjust : 500 mm,
Main Motor : 37 kw,
Cushion : 80 tons,
Cushion Stroke : 250 mm,
3 Axis Servo Transfer Unit -
Model : FTL40-M1,
Feed Stroke : 400/600,
Clamp Stroke : 0 - 200 mm,
Lift Stroke : 0 - 85 mm,
Stroke per minute : 20,
Stage : 6.4.
Good Condition Photo
57 MA26474 AIDA,Japan PDM25 Capacity : 250 ton,
Stroke Length : 300 mm,
No of Strokes : 20 spm,
Die Height : 525 mm,
Bolster Size (RL x FB) : 1,830 x 1,220 mm,
Slide Size (RL x FB) : 1,650 x 1,000 mm,
Slide Adjustment : 125 mm,
Main Motor : 18.5 kW,
Knockout Capacity : 12.5 ton,
Knockout Stroke : 150 mm,
Bed Hole Size (RL x FB) : 680 x 680 x 2 mm,
Die Cushion,
Capacity : 40 ton (at 5kg/cm2 air pressure),
Effective Stroke Length : 150 mm,
Pad Size (RL x FB) : 650 x 830 x 2 mm.
Good Condition Photo
58 MA26460 Fukui MDC400 Capacity : 400 ton,
Stroke : 400 mm,
Stroke per minute : 25 rpm,
Dia height : 700 mm,
Bed size : 2130 x 1370 mm.
1974 Good Condition Photo
59 MA26456 WMW Erfurt,Germany PKZVI800.1FS Nominal force : 8000 kN,
Ram stroke : 500 mm,
Number of ram strokes min : 14,
Bed to bolster plate adjustment : 500 mm,
Shut height : 1700 mm,
Size of bed : 4000 x 2500 mm,
Size of ram : 3950 x 2500 mm,
Gap size of table : 3520 x 1520 mm,
Cushion's power on table : 1600 kN,
Tables ejector (cushion) : 200 mm,
Main drive motor power : 90 kW,
Height above floor level approx : 8400 mm,
Weight approx : 230 tons.
Good Condition Photo
60 MA26455 WMW Erfurt,Germany PKZVIII500.1FS 500 tons, slide stroke 500 mm, strokes x minute 20 min, hydraulic overload, shut height 1200 mm, slide adjustment 400 mm, bed size 3150 x 2100 mm , moving bolster front to back, slide area 3150 x 2100 mm , upright opening 2200x1670 mm, bed cushion stroke 200 mm, power of main motor 75 kw, max height above floor 7500 mm, press weight about 129 ton, Quantity : 2 nos. Good Condition Photo
61 MA26445 WMW Erfurt,Germany PKZZIV500.1FS Capacity : 500 ton,
Bed : 2800 x 1800 mm,
Ram Stroke : 500 mm,
Ram stroke per min : 20,
Ram adjustment : 500 mm,
Shuth height : 1100 mm,
Qty : 2 nos.
Good Condition Photo
62 MA26440 WMW Erfurt,Germany PKZZIV500.1TS Capacity : 500 ton,
Bed : 2800 x 1800 mm,
Ram Stroke : 500 mm,
Ram stroke per minute : 20,
Ram adjustment : 500 mm,
Shuth height : 1100 mm.
Good Condition Photo
63 MA26422 Danly S2-600-120-60 Capacity : 600 ton,
Stroke : 600 mm,
Shut height : 1275 mm,
Slide adjustment : 400 mm,
Bed & slide area : LR-3000 x FB-1500 mm,
Bed opening : LR-2625 mm x FB-975 mm,
Stroke per minute : 20,
Equipped with :-
Air clutch and brake,
Air cushions - # 2BP-36-12/101.4 ton @ 100 PSI,
Air counterbalances,
Bolster plate : 212 mm,
T-Slotted slide,
75HP drive motor,
Overall dimensions : LR-5000 mm x FB-2500 mm,
Height above floor : 8100 - 250 mm,
Pit depth : 2400 mm,
Total weight of machine : 220,000 lbs.
1977 Good Condition Photo
64 MA26312 TMP Voronezh Russia KB3732A Nominal force : 1600 kN,
Ram stroke : 320 mm,
Number of ram stroke per minute : 32 ,
Shut height : 750 mm,
Bed to ram adjustment stroke : 200 mm,
Bed dimensions : 2000 x 1250 mm,
Ram dimension : 1000 x 1000 mm,
Bolster plate thickness : 140 mm,
Main drive motor power : 22 kW,
Overall dimensions :
Floor space : 3380 x 2400 mm,
Height above floor level : 5000 mm,
Mass ton arrrox. : 28.0 tons.
1987 Good working condition Photo
65 MA26256 WMW Erfurt,Germany PKZZ500 Maximum force of slide 500 T,
Stroke of slide 500 mm,
Adjustability of slide 500 mm,
Max. daylight between bolster and slide, SDAU 1100 mm,
Width between columns 2800 mm,
Slide area (W x D)2800x1700 mm,
Bed area (W x D)2800x1800 mm,
Opening in bed (W x D) 2400x1250 mm,
Main motor power 75kW,
Idle stroke rate 20 per min,
Counter pressure of cushion in bed 100 T,
Stroke of cushion plate 200 mm,
Height above ground 7600 mm,
1977 Good Condition Photo
66 MA26252 Yodogawa PDU600 Capacity : 600 tons,
Bolster : 1800 x 1000 mm,
Die height : 500 mm.
Good condition,under power Photo
67 MA26249 Fukui MDE500AB Capacity : 500 ton,
Stroke : 500 mm,
Bolster : 2500 x 1500 mm,
Stroke per minute : 15-20,
Die height : 1100 mm,
Adjustment : 500 mm,
Cushion : 50 ton x 2,
Stroke : 0-200 mm,
Pad : 1090 x 1090.
Moving Bolster.
Very good condition,Under power Photo
68 MA26248 Fukui MDE500 Capacity : 500 tons,
Stroke : 510 mm,
Bolster : 2550 x 1520 mm,
Stroke per minute : 15,
Die height : 700 mm,
Adjustment : 500 mm,
Cushion : 50 ton x 2,
Stroke : 0-200 mm,
Pad : 1090 x 1090.
Very good condition,Under power Photo
69 MA26246 Toyo Capacity : 800 ton,
Stroke : 300 mm,
Bolster : 1200 x 1100 mm,
Stroke per minute : 16 SPM,
Die Height : 650 mm.
Good condition,under power Photo
70 MA26238 WMW Erfurt,Germany PKZZI1250 1250 tons , table dimensions 4000 x 1800 mm ,max. drawing depth 250 mm, table opening 3750 x 1300 mm, ram dimensions 3950 x 1800 mm , shut height 1165 mm , stroke 630 mm , adjustment 630 mm , 11 SPM , main motor power 132 kW , distance between columns 4000 mm , ejector capacity 40 tons, drawing depth adjustment 250 mm,weight 245 tons Good Condition Photo
71 MA26237 WMW Erfurt,Germany PKZZIII250.1FS Capacity : 250 tons, No.of strokes 20-25 per min., moving (front -back) table : 2500 x 1250mm, slide stroke : 400mm, Ram Size : 2500 x 1250mm, Table opening : 2100 x 850mm, Slide adjustment 250mm, Shut height 800mm, Cushion stroke 160mm, Cushion capacity 50 tons, Distance between columns : 2500mm, Main motor power 45kW, Length 4650, Width 3600mm, Height 11250mm, Weight 62 Tons. Qty : 2 Nos Good Condition Photo
72 MA26228 Toyo SI1000 Capacity : 1000 tons,
Stroke : 300 mm,
Stroke per minute : 15,
Shut height : 650 mm,
Bolster : 1300 x 1350 mm,
1986 Good Condition Photo
73 MA26227 Clearing S2-500-144-48 Capacity : 500 ton,
Table surface : 3700 x 1200 mm,
Ram travel : 610 mm,
Slide adjustment : 380 mm,
Max distance between table/ram : 1420 mm,
Lateral gap : 3759 mm.
Good Condition Photo
74 MA26226 Raimondi Capacity : 220 ton,
Table surface : 1200 x 800 mm,
Ram travel : 40-280 mm,
Stroke per minute : 15-30,
Max distance between table : 580 mm,
Power : 25 Hp,
Overall dimensions : 2100 x 1300 x 3200 mm,
Weight of machine : 13500 kg.
Good Condition Photo
75 MA26205 Texer Erfurt SE2-350-2500-1400 Capacity : 350 ton,
Slide stroke : 400 mm,
Strokes X minute : 18 min,
Shut height : 750 mm,
Slide adjustment : 400 mm,
Bed size : 2500 x 1400 mm,
Slide area : 2450 x 1400 mm,
Upright opening : Yes,
Hydraulic overload : yes.
2002 Very good condition,Under power Photo
76 MA26202 WMW Erfurt,Germany PKZZIII315FS 315 tons , slide stroke 400 mm, die height 900 mm, 25 SPM , die space 900 mm, die space adjustment 400 mm, upright space 2500 mm, table dimensions 2500 x 1400 mm, ram dimensions 2500 x 1400 mm, main motor 55 kW, cushion capacity in table 63 tons , cushion slide stroke 160 mm, overall dimensions 4800 x 2700 x 6350 mm, total weight of press 60 tons. 1982 Good Condition Photo
77 MA26201 WMW Erfurt,Germany PE2U315FS Capacity : 315 ton,
Ram stroke : 400 mm,
Moving table dimensions : 2500 x 1450 mm,
Ram adjustment : 320 mm,
Shut height 900 mm,
Stroke : 25 min,
Table cushion : 63 ton,
Cushion stroke : 160 mm,
Height above floor level : 7100 mm,
Quantity : 2 nos.
end 80th Very good condition Photo
78 MA26198 OKK DCM300B Capacity : 300 tons,
Bolster : 2050 x 1500 mm,
Stroke : 200 mm,
Stroke per minute : 25,
Shut height : 600 mm,
Adjustment : 100 mm,

Level/Feeder
Capacity : 980 mm x 0.8 mm,
Capacity : 600 mm x 1.2 mm.
Good Condition Photo
79 MA26193 TMP Voronezh Russia K4039 Capacity : 800 ton,
Ram Stroke : 800 mm,
Number of ram stroke : 20 spm,
Shut height : 1400 mm,
Bolster plate to ram adjustment : 500 mm,
Bed dimensions : 4000 x 2240 mm,
Ram dimensions : 4000 x 2240 mm,
Bolster plate thickness : 250 mm,
Main power drive : 132 kW,
Press dimensions : 6360 x 5250 x 8950 mm,
Press Weight : 250000 kg.
Equipped with moving bolster.
1978 Good working condition Photo
80 MA26170 WMW Erfurt,Germany PKZZIVTS315/2500 Capacity : 315 ton,
Width of working table area : 1400 mm,
Nominal forming force : 315 ton,
Ram stroke : 400 mm,
Number of strokes : 25/ min,
Table dimensions : 2500 x 1400 mm,
Slide dimensions : 2500 x 1400 mm,
Slide adjustment : 400 mm,
Shut height : 900 mm,
Passage between columns : 2550 mm,
Main motor : 85 kw,
Dimensions L x W x h : 5000 x 3500 x 6700 mm,
Machine weight : 75000 kg,
Length of working table area : 2500 mm.
Good Condition Photo
81 MA26167 OKK,Japan DCM200B Capacity : 200 tons,
Ram Stroke : 300 mm,
Bolster : 1800 x 1200 mm,
Slide : 1650 x 1000 mm,
Stroke per minute : 25,
Die height : 600 mm,
Adjustment : 150 mm,
Main motor : 18.5 4P.
Qty : 2 nos.
Good Condition Photo
82 MA26166 AIDA,Japan PD30 Capacity : 300 tons,
Stroke : 300 mm,
Stroke per minute : 20-35,
Bolster : 2500 x 1300 mm,
Slide : 2450 x 1000 mm,
Die height : 725 mm,
Adjust : 100 mm,

Transfer unit :
Feed stroke : 250 mm,
Clamp stroke : 80 mm,
Stroke per minute : 35,
Finger bar inner width : 360 mm,
Feed height : 350 mm,
Stage : 9.
Good Condition Photo
83 MA26164 AIDA,Japan FT300 Capacity : 300 tons,
Stroke : 350 mm,
Stroke per minute : 15-35,
Stage : 7,
Die height : 850 mm,
Transfer Unit:
Max. drawing depth : 120 mm,
Die pitch : 400 mm,
Clamp stroke : 120 mm.
Good Condition Photo
84 MA26145 Radaelli S4-1000-3200-2200 Capacity : 1000 ton,
Stroke : 500 mm,
Stroke per minute : 12,
Bolster plate / slide : 3200 x 2200 mm,
Opening in the uprights : 900 x 1200 mm (h),
Cushions number : 3.
Good condition,under power Photo
85 MA26122 Manzoni T1500-4MR.CE Capacity : 1000 ton,
Slide stroke : 300 mm,
Strokes X minute :15-45 MI,
SHut height : 805 mm,
Slide adjustment : motorizzata 130 mm,
Bed size : 2400 x 2200 mm,
Slide area : 2250 x 2200 mm,
Upright opening : 2500 x 1350 mm,
Power of main motor : 134 KW,
Press weight about : 236 ton,
Manual strokes per minute : 4-10 NR,
Moving bolster front to back.
1997 Good Condition Photo
86 MA26105 AIDA,Japan Capacity : 500 ton,
Stroke : 500 mm,
Bolster : 2200 x 1700 mm,
Stroke per minute : 12,
Die height : 850 mm,
Adjust : 240 mm,
Stroke : 165 mm,
Cushion : 150 ton.
Good working condition Photo
87 MA26103 Shinohara PL2-500-30 Capacity : 500 ton,
Stroke : 500 mm,
Bolster : 30000 x 1500 mm,
Stroke per minute : 14,
Die height : 1000 mm,
Adjust : 300 mm,
Stroke : 300 mm,
Cushion : 45 ton.
Good working condition Photo
88 MA26100 Shinohara Capacity : 400 ton,
Stroke : 400 mm,
Bolster : 2200 x 1400 mm,
Stroke per minute : 16,
Shut height : 850 mm,
Adjust : 200 mm,
Stroke : 210 mm,
Cushion : 28 tons x 2.
Good working condition Photo
89 MA26099 Shinohara Capacity : 350 ton,
Stroke : 450 mm,
Bolster : 2500 x 1440 mm,
Stroke per minute : 16,
Die height : 800 mm,
Adjust : 220 mm,
Cushion : 33 tons,
Stroke : 200 mm.
Good working condition Photo
90 MA26091 TMP Voronezh Russia K3044 2500 tons, slide stroke 600 mm, ram strokes 11 continous/min, (can increase upto 16 in automatic), distance table and slide , when stroke down 1350 mm(can be increased for 500mmdue to length of tie bar), slide adjustability 500 mm, table area from 3960 x 2000 mm, slide area 4250 x 1800mm, bolster thickness 350mm, number of cushions in table 3, cushion travel in table 270mm, cushion effort and cushion ejection at P=5,2kg/cm2 100 tons, distance between columns 4300 mm, force of slide ejector 400kN, travel of slide ejector 150mm, mod of main motor AK-104-6M, main motor power 200kW, revolutions per min 975 RPM, overall dimensions 5685 x 8232 mm, height above floor level 9485 mm, general weight 437117 kgs, Quantity : 2 nos 1980/1973 Good Condition Photo
91 MA26082 Komatsu L2G300 Capacity : 300 ton,
Stroke length : 450 mm,
Stroke per minute : 15~30 spm,
Die height : 650 mm,
Slide area : 1000 x 1200 mm,
Bolster area : 2100 x 1350 x 180 mm,
Slide adjustment : 250 mm,
With DC and die lifter,
Material hand robot.
1989 Good Condition Photo
92 MA26073 SIMPAC SS500 Capacity : 500 ton,
Slide stroke : 120 mm,
Number of slide stroke : 50,
Available work energy : 5000 kg-m/cycle,
Slide area (L.R. X F.b ) :1500 x 1400 mm,
Bolster area (L.R. x F.B x H) : 1500 x 1400 x 210 mm,
Slide adjustment : 200 mm,
Die height : 350 mm (shut height : 560),
Upright frame opening
Front : min 1700 mm,
Slide (front to back x height) : min 1200 x 250 mm,
Height from floor level to top of bed : 540 mm,
Height from floor to bolster top : 750 mm,
Overall height of press from floor level : max.6400 mm,
Max. depth of press below floor level : approx.3500 mm,
Main motor capacity : 75 Kw
Brand New Photo
93 MA26066 OKK DCM300B3 Capacity : 300 ton,
Stroke : 350 mm,
Stroke per minute : 16,
Slide adjustment : 200 mm,
Die height : 725 mm,
Slide size : 1900 x 1200 mm,
Bolster : 2150 x 1350 mm,
Main motor : 37 kW 4P,
With die cushion.
1977 Good Condition Photo
94 MA26065 Hitachi S4-500-270-170 Capacity : 500 ton,
Stroke : 600 mm,
Stroke per minute : 16,
Die height : 1200 mm,
Slide adjustment : 600 mm,
Moving bolster : 2700 x 1700 mm,
With die cushion.
1967 Good Condition Photo
95 MA26035 OKK Capacity : 100 ton,
Ram stroke : 170 mm,
No of stroke : 50 spm,
Ram adjustment : 75 mm,
Die height : 350 mm,
Ram undersurface : 450 x 600 mm,
Bolster : 560 x 1060 mm,
Motor : 7.5 kW 4P,
Clutch air pressure : 4kg / cm2,
Balance air pressure : 2-5kg / cm2.
At dead point : 3.5 mm.
1970 Good Condition Photo
96 MA26034 Amada,Japan TPW250 Capacity : 250 ton,
Stroke length : 254 mm,
Stroke per min : 20~30
Slide adjustment : 120 mm,
Die height : 620 mm,
Slide area : 2100 x 700 mm,
Bolster area : 3210 x 900 mm,
Spindle drive motor : 18.5 kW.
1982 Good Condition Photo
97 MA26030 Bliss SC2-800-96x72 Capacity : 800 ton,
Ram stroke : 300 mm,
Shut height : 519 - 769 mm,
Air counterbalances,
Bolster : 225 mm T-Slotted,
Bed area : 2400 x 1500 mm,
Ram area : 2400 x 1800 mm,
Stroke per minute : 15-30,
Windows : 1300 W x 875 H mm,
Overall dimensions : (LR x FB x H) : 3500 x 3100 x 6862 mm,
Wight : 200,800 mm,
Crown : 69,700 mm,
Bend : 48,700 mm,
Upright slide : 34,100 mm,
Air clutch.
Good Condition Photo
98 MA26025 Arrasate S4-400-108-64T Capacity : 400 ton,
Ram Stroke : 520 mm,
bed dimensions : 2700 x 1640 mm,
Ram dimensions : 2700 x 1600 mm,
Distance between stands : 2750 mm,
Lateral windows : 1740 x 1920 mm,
Ram adjustment : 360 mm,
Speed : 16-30 min,
Shut height : 1300 mm,
Bed cushions power : 63,7 ton,
Bed cushions stroke : 200 mm,
Main motor : 75 kW,
Height over floor : 7887 mm,
Machine weight : 109,000 kgs.
4 points,
Lateral moving bolster (two tables available),
Lateral windows,
Hydraulic safety overload system,
Safety barriers.
1984/2008 Excellent condition,under power Photo
99 MA26024 WMW Erfurt,Germany PKZZI315.1FS Capacity : 315 ton,
Stroke : 400 mm,
Bed dimensions : 2500 x 1400 mm,
Ram dimensions ; 2450 x 1400 mm,
Distance between stands : 2530 mm,
Nr. of points : 2,
Ram adjustment : 400 mm,
Speed : 18 min,
Shut height : 750 mm,
Bed cushion power : 63 ton,
Bed cushion stroke : 160 mm,
Main motor : 45 kW,
Floor space required : 4300 x 2500 mm,
Height over floor : 6000 mm,
Machine Weight : 60,000 kgs.
1987/2008 Very good condition,Under power Photo
100 MA26011 Hitachi S4-500-330-200 Capacity : 500 ton,
Bolster : 3300 x 2000 mm,
Slide : 3300 x 2000 mm,
Stroke : 600 mm,
Adjust : 300 mm,
Stroke per min : 18,
Die height : 1200 mm,
Cushion : 160 ton,
Cushion stroke : 300 mm,
With side moving bolster ,
The press has a die cushion and 2 side moving bolsters.
Excellent condition,under power Photo
101 MA25993 Amada,Japan SW200 Capacity : 200 ton,
Bolster : 1800 x 1300 mm,
Stroke : 250 mm,
Stroke per minute : 20-30 mm,
Die height : 480 mm.
1978 Good Condition Photo
102 MA25952 Cowlishaw Walker S4-400-108-16 Capacity : 400 ton,
Bed area : 2743 x 1524 mm,
Slide stroke : 406 mm,
Side adjustment : 355 mm,
Speed : 16 spm.
Good Condition Photo
103 MA25920 WMW Erfurt,Germany PE2U315FS Capacity : 315 ton,
Ram stroke : 400 mm,
Moving table dimensions : 2500 x 1450 mm,
Ram adjustment : 320 mm,
Shut height 900 mm,
Stroke : 25 min,
Table cushion : 63 ton,
Cushion stroke : 160 mm,
Height above floor level : 7100 mm.
Dismantled,Good condition Photo
104 MA25916 OKK DCM200B Capacity : 200 ton,
Stroke length : 400 mm,
Stroke per min : 18 S.P.M,
Slide area : 1000 x 1550 mm,
Bolster area : 1200 x 1800 mm,
Slide adjustment : 200 mm,
Die height : 700 mm,
Frame Type : H,
Motor power : 18 kW,
Net weight : 28 ton,
Dimensions (LxWxH) : 3.3 x 2.3 x 5.8 m.
1973 Good Condition Photo
105 MA25907 TMP Voronezh Russia KB3537 500 tons, slide stroke 250mm, table dimensions 2500 x 1400mm, slide dimensions 2380 x 1200mm, overall dimensions 4350 x 2470 x 5660mm, height above floor 5660mm, press weight 70 tons. Press with pneumatic die cushions . 1984 Good Condition Photo
106 MA25906 TMP Voronezh Russia K3535A 315 tons, ram stroke 400 mm, 25 SPM , shut height 750 mm, bed to ram adjustment stroke 250 mm, bed dimensions 2500 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 47 kW , overall dimensions 4555 x 2900 x 6850 mm, mass 50.9 tons. 1992 working condition ,under power Photo
107 MA25899 AIDA,Japan C2-20(2) Capacity : 200 ton,
Stroke : 250 mm,
SPM : 20 - 35,
Bolster : 2420 x 840 mm,
Slide : 1850 x 650 mm,
Die Height : 500 mm,
Adjust : 110 mm,
Main Motor : 22 Kw,
 
Destacker Feeder  
Make : Aida,
Model :VF-4040,
Magazines : 2,
Stroke : 900 mm,
Blank Thickness : 0.6 - 2.3 mm,
Blank Size :120 x 120 mm (min),
Blank Size : 400 x 400 mm (max),
  
Transfer Feeder  
Make : Aida,
Model : TCV-4T,
Feed Stroke : 400 mm,
Feed Stroke : 350 mm,
Feed Stroke : 200 mm,
Clamp Inner Width : 420 mm,
Clamp Stroke : 100 mm,
Lift Stroke : 40 mm,
Feedbar Height : 250 mm,
Stage : 4, 5, 9.
1981 Good Condition Photo
108 MA25882 Mecfond SE2-400-274-152 Capacity : 400 ton,
Number of point : 2,
Bed size : 2,743 x 1524 mm,
Ram size : 2743 x 1524 mm,
Distance between columns frontal : 2800 mm,
Lateral windows : 1600 x 1160 mm,
Shiut height (SDAU) : 1120 mm,
Stroke : 600 mm,
Ram adjustment : 270 mm,
Speed : 12 x min,
Bed cushion : 3,
Cushions power : 75 ton,
Cushions stroke : 306 mm,
Machine dimensions :
Floor space required : 4110 x 2700 mm,
Height over floor : 6250 mm,
PIT depth : 3700 mm,
Machine weight : aprox. 95,000 kgs.
1982 Good Condition Photo
109 MA25778 Cowlishaw Walker S1-250-48-36 Capacity : 250 ton,
Bed : 1219 x 914 mm,
Ram : 1219 x 914 mm,
Stroke : 305 mm,
Adjustment : 153 mm,
Shut height : 762 mm,
Cushion.
Good Condition Photo
110 MA25763 WMW Erfurt,Germany PKZZI800 Capacity : 800 t, Nominal force : 8000 kN, Ram stroke : 500 mm, Number of strokes : 14 min, Shut height : 1050 mm, Bolster plate to ram adjustment stroke : 1050 mm, Bed : 3150 x 1600 mm, Ram : 3150 x 1600 mm, Stroke of pneumatic table : 200 mm, Cussions power : 1600 kN, Main drive motor : 90 kW, Dimensions of press L x W : 6000 x 3000 mm, Height above floor level : 8000 mm, Weight of Press : 145 t. Good Condition Photo
111 MA25746 TMP Voronezh Russia K3044 The presses are designed for making from sheet stock medium and large size parts that require blanking bending, shaping ,shallow drawing and other cold pressing operations.
Capacity : 2500 ton,
Ram stroke : 630 mm,
Number of ran stroke per minute : 14 mm,
Shut height : 1180 mm,
Bed to ram adjustment stroke : 400 mm,
Bed dimensions : 5000 x 2000 mm,
Ram dimensions : 5000 x 1800 mm,
Bolster plate thickness : 350 mm,
main drive motor power : 200 kW,
Overall dimensions :
Floor space : 7720 x 5600 mm,
Height above floor level : 10800 mm,
Weight approx.: 500 ton.
Good working condition Photo
112 MA25741 WMW Erfurt,Germany PKZVI800FS Capacity 800 ton, Stroke 508 mm, Number of strokes 14 s.p.m., Shut Height (S.D.A.U.) 1500 mm, Adjustment 700 mm, Table surface 4000 x 2500 mm, Ram surface 3950 x 2500 mm, Cushion in bed 160 t, Cushion stroke 200 mm, Cushion area 3710 x 1760 mm, Motor 90 kW, Weight approx. 217 ton, Quantity : 4 nos. Good Condition Photo
113 MA25671 TMP Voronezh Russia KB3537 500 tons, slide stroke 250mm, table dimensions 2500 x 1400mm, slide dimensions 2380 x 1200mm, overall dimensions 4350 x 2470 x 5660mm, height above floor 5660mm, press weight 70 tons. Press with pneumatic die cushions . 1986 Good Condition Photo
114 MA25632 WMW Erfurt,Germany PKZZIII315OS Capacity : 315 Tons, Ram stroke : 400 mm, Shut height : 900 mm, Ram adjustement : 400 mm, Table dimensions : 2500 x 1400 mm, Ram dimensions : 2500 x 1400 mm, Distance between columns : 2600 mm, Hydraulic overload protection, Number of strokes 25/min, Main motor 46 kw, Dimensions : 7500 x 3700 x 2500, Height from the floor : 6350 mm, Electrical and mechanical part complet, Force 315 T 1970 Good Condition Photo
115 MA25618 Verson SE4-600-108-72 Capacity : 600 ton,
Bed size : 2700 x 1800 mm,
Stroke : 600 mm,
Shut height : 1000 mm,
Adjustment : 400 mm,
Stroke Per Min :20,
Floor standing : 5250 overall height
1981/Rebuilt in 2007 Good Condition Photo
116 MA25617 TMP Voronezh Russia K3540 1000 tons, ram stroke 400 mm, SPM 20, shut height 1060 mm, adjustment 320 mm, ram dimensions 3150 x 1700 mm, moving table dimensions 3150 x 1800 mm, bolster plate thickness 260 mm, height above floor level 7830 mm, main motor power 132 kW, dimensions 5150 x 4700 mm, weight 193 tons. with 2 cushions 1977 Good working condition Photo
117 MA25615 WMW Erfurt,Germany PKZVIV500TS Capacity : 500 tons,
Stroke : 500 mm,
Slide adjustment : 500 mm,
Table surface : 2800 x 1800 mm,
Ram surface : 2800 x 1800 mm,
Shut height (S.D.A.U.) : 980 mm,
Cushion in bed : 100 ton,
Cushion stoke : 200 mm,
Number of strokes : 20 S.p.m.,
Distance between columns L-R : 2800 mm,
with hydraulic overload protection.
1971 Very good condition Photo
118 MA25612 Schuler German E2-500-2.2-500 Capacity : 500 tons,
Number of strokes : 8-30 s.p.m.,
Table surface : 2200 x 1600 mm,
Stroke : 500 mm,
Shut height : 700 mm,
Cushion in bed : 50 ton,
Cushion stroke : 50 mm,
Ejector : 5 ton,
Ejector stroke : 20 mm,
Distance between columns L-R : 2360 mm,
Press height over floor : 7500 mm,
Min depth of pit : 2600 mm,
weight approx. : 60 ton.
1974/ overhaulded with new electric cabinet in 1993 Very good condition Photo
119 MA25588 Komatsu OBW200 Capacity : 200 ton,
Stroke length : 250 mm,
Die height : 500 mm,
Slide adjust : 120 mm,
No. of stroke : 20 to 40 rpm,
Bolster size : 2400 L-R x 800 F-B x 130 thickness mm,
Slide size : 1850 L-R x 650 F-B mm.
1978 Good Condition Photo
120 MA25575 Rovetta,Italy Capacity : 500 Tons, Slide stroke : 620 mm, Distance between Table & Slide : 800 - 1300 mm, Distance between passage : 3400 mm, Table Size : 3350 x 2130 mm, Cushion capacity : 80 Tons, Cushion stroke : 150 - 300 mm, Overall dimensions : 4800 x 3200 mm, Total Weight : 97 Tons, With Moving Bolster & Hydraulic Overload System. 1980 Good Condition Photo
121 MA25560 WMW Erfurt,Germany PKZVIII500.1FS Capacity : 500 tons,
Ram stroke : 500 mm,
Ram adjustment : 500 mm,
Shut height between table and ram : max. 1200 mm,
Number of ram stroke per min : 20,
Width between uprights : 3150 mm.
Ram area : 3150 x 2100 mm,
Table area : 3150 x 2100 mm,
Thickness of bolster plate : 225 mm,
Press of cushion : 1600 Kn,
Max. motor input : 75 kW,
Dimensions (LXWXH) : 4700 x 4400 x 7500 mm,
Total weight of press approx. 140 tons.
With Hydraulic Overload System & Moving Bolster.
1980 Good Condition Photo
122 MA25558 Clearing S4-1000-120-84 Capacity : 1000 tons,
Stroke : 300 mm,
Shut height: 1100 mm,
Motorized adjustment : 200 mm,
Bed area :3000 LR x 2100 FB,
Slide area : 3000 LR X 2100 FB,
0-60 VSPM,


Equipment and Features
Air Clutch and Brake
Air Counterbalances
Recirculating Lube System
(2) Rolling Bolster
Hydraulic Tie-Rod Nuts
Quick Die Change
T-Slotted Ram and Bolster
Hydraulic Overloads
Free Standing Counsel Control
Motors and Controls
94" Wide Windows
1991 Good Condition Photo
123 MA25557 Clearing S4-1000-120-84 Serial : 2 available ,
Capacity : 1000 tons,
Stroke : 300 mm,
Shut height : 1100 mm,
Motorizes adjustment : 200 mm,
Bed area : 3000 LR x 2100 FB,
Slide area : 3000 LR x 2100 FB,
0-60 VSPM,


Equipment and Features
Air Clutch and Brake
Air Counterbalances
Recirculating Lube System
(2) Rolling Bolster
Hydraulic Tie-Rod Nuts
Quick Die Change
T-Slotted Ram and Bolster
Hydraulic Overloads
Free Standing Counsel Control
Motors and Controls
94" Wide Windows.
1991 Good Condition Photo
124 MA25530 USI Vickers Capacity : 450 tons,
Table surface (left-right) : 2740 mm,
Table surface (front back) : 1520 mm,
Stroke : 610 mm,
Stroke rat (max.) : 16/min,
Cushion force : 75 ton,
Cushion stroke : 254 mm,
Adjustment : 610 mm,
Shut height (stroke down, adjustment up) : 1165/1070 mm,
Attachments :
+ black loader,
+ Press automation,
+ Unloading station,
+ 3 die carts, feeding 5 presses,
+ Hydraulic tool fixtures at slide,
+ Hydraulic over load system,
Control : PLC allan bradley.,
Quantity : 5 nos.
Good Condition Photo
125 MA25521 Weingarten Capacity: 550 Ton
Bed Size: 2400 x 1500 mm,
Stroke: 600 mm
Shut Height: 925 mm,
Adjustment: 300 mm,
SPM : 10.
Quantity : 3 nos.
Rebuilt 2006 Good Condition Photo
126 MA25464 Leinhaas 160 Capacity: 160 ton,
PRESS TABLE =
Table surface (left-right):1100 mm,
Table surface (front-back):700 mm,
Thickness of bolster plate:100 mm,
Height above floor level:800 mm,
RAM =
Table surface (left-right):750 mm,
Table surface (front-back):350 mm,
Stroke:120 mm,
Stroke rate(max.):50/min,
TOOL ASSEMBLY DIMENSIONS =
Shut height (stroke down, adjustment up):380 mm,
Throat (C-frame):360 mm,
FEEDERS =
Feeder: type roll feeder,
Sheet width max: 400 mm,
Sheet thickness max : 4 mm,
Feeding step min : 0.1 mm,
Feeding step max : 6500 mm,
ELECTRICAL SPECIFICATIONS =
Total power consumption : 22 Kw,
Mains voltage : 380 V,
Mains frequency : 50 Hz,
DIMENSIONS / WEIGHTS =
Total weight approx : 10000 kg,
ATTACHMENTS (PRESSES) =
Strip feeder,
Feeder: type roll feeder,
2-hand engagement,
Acc. to actual accident protection regulation,
PRESS DESIGN =
Frame design C-frame, single si,
Opening in table.
1988 Good Condition Photo
127 MA25462 AIDA,Japan PL2-35 Capacity : 350 tons,
Stroke : 500 mm,
Stroke per minute : 12-20,
Die height : 950 mm,
Adjust : 440 mm,
Bolster : 2500 x 1600 mm,
Slide : 2500 x 1520 mm,
Cushion : 40 ton x 2 = 80 tons,
Cushion stroke : 250 mm,
Pad size : 970 x 970 mm (2 pad, 2 cylinders),
Main motor : 37 Kw.
Good Condition Photo
128 MA25461 Natori,Japan Capacity : 350 ton,
Stroke : 400 mm,
Stroke per minute : 18,
Die height : 1000 mm,
Bolster : 2800 x 1650 mm,
Slide : 2600 x 1400 mm,
Adjust : 350 mm,
Die Cushion :-
Capacity : 100 ton,
Stroke : 200 mm,
Pad size : 1215 x 1240 mm.
Qty : 2 nos.
Good Condition Photo
129 MA25381 WMW Erfurt,Germany PEI100 Nominal pressure force : 100 ton,
Ram travel : 13-150 mm,
Ram adjustment : 100 mm,
Max. distance between :
ram and table at adjustment "0" : 585 mm;
Table dimensions:
-Length : 980 mm,
-Width : 685 mm,
Table hole dimension : 295,
Filler plate dimensions on table:
Length : 980 mm,
Width : 685 mm,
Thickness : 80 mm
Filler plate hole dimension : 295
Ram dimensions:
-Length : 560 mm
-Width : 350 mm.
Good Condition Photo
130 MA25347 WMW Erfurt,Germany PKZ400 Nominal pressure force : 400 tons;
Ram travel : 315 mm;
Ram adjustment : 200 mm;
Max. distance between
ram and table at adjustment "0" : 840 mm;
Table dimensions:
-Length : 1.000 mm;
-Width : 1.320 mm;
-Thickness : 160 mm;
Table hole dimension : 350;
Ram dimensions:
-Length : 990 mm;
-Width : 1.060 mm.
With Die Cushions.
Good Condition Photo
131 MA25343 Niagara SE2-250-120-60 Capacity : 250 ton,
Ram :-
Stroke : 500 mm,
Stroke rate : 18 min,
Press Table :-
Table surface (left-right) : 3000 mm,
Table surface (front-back) : 1500 mm,
Good Condition Photo
132 MA25337 Komatsu E4S400MB Capacity : 400 Tons
slide stroke : 500 mm,
Die height : 1420 mm,
Slide adjustment : 500 mm,
No. of stroke : 12-18 rpm,
Moving bolster (right to left) : 2500 x 1700 x 230 mm,
Die cushion : 100 ton, 1 pad 2 cylinders.
1969 Good Condition Photo
133 MA25327 WMW Erfurt,Germany PKZZ2000/4000 Force : 2000 t,
Stroke : 630 mm,
Rolling out table : 1600 x 4000 mm,
Effective working stroke : 33 mm,
Max. drawing depth : 250 mm,
Idle stroke per minute : 6,
Adjustment : 270 mm,
Force of drawing device : 400 t,
Pressing force with max. drawing depth : 860 t.
1962 Good Condition Photo
134 MA25277 Weingarten DQ500S Capacity : 500 tons,
Number of strokes : 14 SPM,
Table surface : 3100 x 1300 mm,
Ram surface : 3100 x 1300 mm,
Shut height : 1000 mm,
Ram adjustment : 300 mm,
Cushion in bed : 150 ton,
Cushion stroke : 200 mm,
Distance between columns L-R : 3200 mm,
Dimensions : 4700 x 2700 x 4850 mm,
Weight approx : 145 ton.
1964 / 2003 Good Condition Photo
135 MA25209 Shinohara DA300D Capacity : 300 tons,
Stroke : 300 mm,
Strokes per minute : 24,
Die height : 650 mm,
Adjust : 200 mm,
Bolster : 2000 x 1220 mm,
Slide : 1820 x 1220 mm,
Cushion : 48 tons,
Cushion stroke : 150 mm,
main motor : 22 Kw.
Good Condition Photo
136 MA25208 AIDA,Japan PL2-35 Capacity : 350 tons,
Stroke : 450 mm,
Strokes per minute ; 12,
Die height : 900 mm,
Adjust : 400 mm,
Bolster : 3000 x 1300 mm,
Slide : 3000 x 1300 mm,
Moving bolster : Side movement,
Cushion : 150 tons,
Cushion stroke : 200 mm,
Pad size : 2500 x 1000 mm,
Main motor : 37 Kw.
Good Condition Photo
137 MA25186 Agostino Colombo 422D1500 Capacity : 1500 ton,
Table : 2240 x 2100 mm,
Adjustment ram : 70 mm,
Main motor power : 100 kw,
Main and second power : 380 v 50 Hz, 110 v 59 hz,
Weight : 160,000 kg,
Good Condition Photo
138 MA25183 Danly S4-600-144-84 Capacity : 600 ton,
Bed size : 3600 x 2,100 mm,
Stroke : 750 mm,
Stroke per min : 18 ,
Shut height : 1,800 mm,
Adjustment : 450 mm,
Quantity : 2 nos.
Good Condition Photo
139 MA25168 Danly S4-1000-120-84 Capacity : 1000 ton,
Bed : 3000 x 2100 mm,
Stroke : 500 mm,
Bolster : 3000 x 2100 mm,
Shut height : 1600 (SDAU,over bed) mm,
Adjustment : 750 mm,
Strokes per min : 20,
Cushion tonnage :166 tons,
Cushion stroke : 250 mm.
No windows but can be installed at extra cost
1964 Very good condition Photo
140 MA25167 Danly Capacity : 1000 ton,
Bed : 3600 x 2100 mm,
Stroke : 900 mm,
Bolter : 3600 x 2100 mm,
Windows in side columns : 2600 mm wide,
Shut height : 1,900 (SDAU) mm,
Adjustment : 150 mm,
Strokes per min :8-20,
With : (2) rolling bolsters- left to right,
With Die Cushion,
With Hydraulic Overload System.
1984 Good Condition Photo
141 MA25166 Danly S4-800-108-60QDC Capacity : 800 ton,
Bed : 2,700 x 1,500 mm,
Stroke : 800 mm,
Shut height : 1,525 mm,
Adjustment : 500 mm,
Strokes per min : 19
Windows (2) rolling bolster,(5) presses availble.
Very good condition Photo
142 MA25165 USI Clearing S4-1000-156-100 Capacity : 1000 ton,
Bed : 3,900 x 2,500 mm,
Stroke : 750 mm,
Shut height : 2,050 mm,
Adjustment :600 mm,
Strokes per min : 10,
Windows : 600(can be opened to 45")
With Rolling bolster,
OmniLink 5000 control with tonnage monitor.
Good Condition Photo
143 MA25164 Verson Capacity : 800 ton,
Bed : 3300 x 2400 mm,
Stroke : 600 mm,
Shut height : 1725 (SADU) mm,
Adjustment : 375 mm,
Strokes per min : 14
Very good condition Photo
144 MA25163 Clearing S4-800-132-84 QDC Capacity : 800 ton,
Bed : 3,300 x 2,100 mm,
Stroke : 800 mm,
Shut height : 1,612.5 (SADU) mm,
Adjustment : 600 mm,
Strokes per min : 17,
Press weight : 350,000 - 400,000 LBS (approx),
Electrics : Link 501, 250 Amps, 480V,
With Hydraulic Overload protection,
No Cushions & No Moving Bolster.
1960s Very good condition Photo
145 MA25161 USI capacity:150 ton,
Bed : 800 x 600 mm,
Stroke : 200 mm,
Shut height : 51.25 mm,
Adjustment : 125 mm,
Strokes per min : 20-40 (Variable),
Cushions (220. ton,6" stroke) : 150.
Under power Photo
146 MA25159 OKK,Japan Capacity : 350 tons,
Stroke : 350 mm,
Stroke per minute : 25,
Die height : 850 mm,
Adjust : 200 mm,
Bolster : 2050 x 1500 mm,
Slide : 1800 x 1200 mm,
Side opening : 800 x 800 mm,
Die cushion : 60 tons,
Stroke : 175 mm,
Pad : 1000 x 1500 mm.
Good Condition Photo
147 MA25154 Bliss-Emua S4-400 Power capacity : 400 ton,
Bolster dimensions : 2.750 x 1.675 x 345 mm,
Number of bolsters : 5,
Ram dimensions : 2.950 x 1.675 mm,
Distance between uprights : 3000 mm,
Lateral windows dimensions (width x height) : 1800 x 1720 mm,
Stroke : 700 mm,
Ram adjustment : 400 mm,
Strokes per minute, adjustable : 8 - 20 spm,
Shut height (stroke down-adjustment up) : 1545 mm,
Number of ram clamping units : 4,
Motors :-
Main motor : 55 kw,
Ram adjustment motor : 7,5 kw,
Machine dimensions :-
Width : 4.600 mm,
Depth : 3000 mm,
Height over floor : 7700 mm,
Approx pit depth : 1500 mm,
Approx. Total weight : 134000 kgs.
With Air clutch,
With 3 lateral moving bolsters,
With Big lateral windows,
With Hydraulic Safety Overoad,
With Hydraulic ram clamping
No Cushions.
Qty : 2 nos.
1987 Dismantled,Good condition Photo
148 MA25136 TMP Voronezh Russia KA3540 Nominal force: 1000 ton,
Slide stroke: 400 mm,
No of continuous slide strokes per 1 min: 20,
No of single slide strokes per 1 min: 16 ,
Shut height: 810 mm,
Slide adjustment: 320 mm,
Table dimensions: 3150x1800 mm,
Slide dim., front-back: 1700 mm,
Bolster thickness: 250 mm,
Slide travel to its extreme position where press develops nominal force: 12 mm,
Total pneumatic cushion force: 200 ton,
Pneumatic cushion working stroke: 200 mm,
Upper knock-out force: 50 ton,
Main-drive electric motor power: 132 kW,
Overall press dimensions: 5150x4700x7830 mm,
Press weight: 193 ton.
1985 Good Condition Photo
149 MA25131 WMW Erfurt,Germany PKZZIV315 Press tonnage : 315 tons,
Botton dead centre : 110 tons,
Table size : 2500x1400 mm,
Ram size : 2528 x 1400 mm,
Shut height ( min - max ) : 350 - 750 mm,
Stroke of slide : 400 mm,
Ram adjustment : 400 mm,
Speed : 25 Stroke per min,
Bolster height from the floor : 600 mm,
Bed cushion stroke : 160 mm,
Bed cushion tonnage : 63 tons.
Each Press has 2 Lateral moving bolster & Hydraulic Overload System.
Qty : 5 nos.
1971 Good Condition Photo
150 MA25105 Arrasate PR250 Press Design :-
frame design C frame, single,
number of slide actions 1,
number of cushions 1,
Press forces :-
total force : 250 ton,
Press Table :-
table surface (left-right) : 1800 mm,
table surface (front-back) : 900 mm,
distance between ejector holes : 150 mm,
Ram :-
ram force : 250 ton,
table surface (left-right) : 1000 mm,
table surface (front-back) : 750 mm,
stroke : 160 mm,
stroke rate : 35 min,
Ram (Mechanical press) :-
ram adjustment : 130 mm,
autom. ram adjustment yes,
stroke adjustment yes,
stroke min : 20 mm,
stroke max : 160 mm,
Die cushion (table cushion) :-
number of cushions : 1,
cushion force : 25 ton,
Working principle,
Tool Assembly Dimensions :-
shut height (stroke down, adjustment up) : 405 mm,
Electrical specifications :-
total power consumption : 22.5 kW,
mains voltage : 380 V,
mains frequency : 50 Hz,
Dimensions / Weight :-
space requirement length : 1800 mm,
space requirement width : 2540 mm,
total height : 3470 mm.
Weight : 18 tons.
Qty : 2 nos.
1975 Good Condition Photo
151 MA25104 Wilkins & Mitchell D84-2-14 Press Design :-
frame design H frame,
openings in uprights no,
number of slide actions : 1,
numbers of cushions : 1,
Press force :-
total force : 200 ton,
Press table :-
table surface (left-right) : 2060 mm,
table surface (front-back) : 1065 mm,
Ram :-
ram force : 200 ton,
table surface (left-right) : 2060 mm,
table surface (front-back) : 850 mm,
stroke : 355 m,
stroke rate : 15 min,
Ram (Mechanical Press) :-.
number of con-rods / cylinders : 2,
ram adjustment : 125 mm,
stroke adjustment no,
stroke min : 340 mm,
stroke max : 525 mm,
Die Cushion (table cushion) :-
number of cushions : 1,
cushion force : 40 ton,
stroke : 178 mm,
table surface (left-right) : 1933 mm,
table surface (front-back) : 660 mm,
Working principle,
Tool Assembly Dimensions :-
shut height (stroke down, adjustment up) : 635 mm,
passline opening (free passage in side columns) : 2133 mm,
Electrical specifications :-
total power consumption : 21 kW,
mains voltage : 380 V,
main frequency : 50 Hz.
1955 Good Condition Photo
152 MA25094 Weingarten ZK900.30 Total Capacity : 900 ton,
Capacity of ram : 500 ton,
Capacity of blank holder : 400 ton,
Min distance between columns : 2800 mm,
Max drawing depth : 250 mm,
Number of stroke per minute : 12,
Stroke of ram : 750 mm,
Stroke of blank holder : 500 mm,
Total size - Width x depth : 2700 x 1500 mm,
Size of blank holder - width x depth : 2700 x 1500 mm,
Ram size - width x depth : 2000 x 1000 mm,
Adjustment of ram and blank holder : 400 mm,
Distance moving bolster / ram ram stroke down, adjustment up : 1400 mm,
Distance moving bolster/blankholder blankh, strokedown, adjustm. up : 1200 mm,
Lateral opening : 1600 x 2000 mm,
Compressed air equipment in bed : 150 mm,
Power supply : 54 kW,
Speed of main motor : 1410 upm,
Power supply for mech. adjustment of ram and blank holder : 4 kW,
Speed of adjustment motors : 1450 UpM,
Total height over floor : 8250 mm,
Total Weight : 190600 kg.
1963 Good Condition Photo
153 MA25077 WMW Erfurt,Germany PKZZIII250.1FS Capacity : 250 tons, No.of strokes 20-25 per min., moving (front -back) table : 2500 x 1250mm, slide stroke : 400mm, Ram Size : 2500 x 1250mm, Table opening : 2100 x 850mm, Slide adjustment 250mm, Shut height 800mm, Cushion stroke 160mm, Cushion capacity 50 tons, Distance between columns : 2500mm, Main motor power 45kW, Length 4650, Width 3600mm, Height 11250mm, Weight 62 Tons. Qty : 2 Nos Good Condition Photo
154 MA25076 WMW Erfurt,Germany PKZZI800 Capacity : 800 t, Nominal force : 8000 kN, Ram stroke : 500 mm, Number of strokes : 14 min, Shut height : 1050 mm, Bolster plate to ram adjustment stroke : 1050 mm, Bed : 3150 x 1600 mm, Ram : 3150 x 1600 mm, Stroke of pneumatic table : 200 mm, Cussions power : 1600 kN, Main drive motor : 90 kW, Dimensions of press L x W : 6000 x 3000 mm, Height above floor level : 8000 mm, Weight of Press : 145 t. Good Condition Photo
155 MA25039 Wilkins & Mitchell S2-250-72-48 Capacity : 250 tons,
Stroke : 406 mm,
Stroke per min : Variable up to 35,
Shut height max. : 952 mm,
Shut height min : 571 mm,
Slide adjustment : 381 mm,
Bed area : 1828 x 1219 mm,
Slide area 1828 x 1219 mm,
Cushions : 2 off total capacity 50 tons,
Cushion stroke : 203 mm,
Side windows wid e: 762 mm,
T slotted ram and bolster,
additional bolster,
Wintress smart pac control system,
Coil equipment : Servo feed unit with indramat drive 30" wide x 2 mm thickness,
Expanding mandrel decoiler 5 ton coil capacity 30" wide (762) mm.
Good Condition Photo
156 MA25036 Wilkins & Mitchell H72-2-10 Capacity : 400 tons,
Stroke : 254 mm,
Stroke per min : 40 mm,
Die height : 20 max / 14 min,
Slide adjustment : 152 mm,
Bed area : 72 x 48 ( 1828 x 1219 ) mm,
Slide area : 72 x 48 (1828 x 1219 ) mm,
Cushions : 50 ton,
Cushion stroke : 127 mm,
Cushion area : 61 x 32 ( 1549 x 812 ) mm.
Good Condition Photo
157 MI5782 TMP Voronezh Russia K3535A CAP. : 315 TONS,
STROKE : 400 mm,
DIE HEIGHT : 750 mm,
BED AREA : 2500 x 1250mm,
WITH DIE CUSHION
Good Condition Photo
158 MA24983 Danly SE2000KN Capacity : 200 to
Lateral opening : 1220 x 1235 mm
Stroke : 610 mm
Strokes per minute : 15 + 35
Shut height (SDAU) : 880 mm
Adjustment of ram : 305 mm
Moving bolster : 2100 x 1066 mm,
Quantity : 4 nos.
1967 Good Condition Photo
159 MA24981 Komatsu OBS250 Capacity : 250 tons
Stroke : 300 mm
Strokes per minute : 20 - 30
Adjustment of ram : 250 mm
Daylight, stroke down, adjustment up : 600 mm
Bed size : 1200 x 800 mm
Thickness of platen : 125 mm
Ram size : 1200 x 800 mm
Required area : 2650 x 2100 mm
Power requirement : 24 kW
Weight : 28.000 kg,
C Frame.
1979 Good Condition Photo
160 MA24980 Weingarten ZS1300.45 Total capacity : 1300 to
Capacity of ram,25 mm of dead centre : 800 to
Capacity of blankholder,
6 mm of dead centre : 500 to
Working capacity at
8 strokes per minute : 20000 mkg
Speed of ram 300 mm of dead
centre, 8 strokes per minute : 0,19 m/s
Speed of ram 300 mm of dead
centre, 18 strokes per minute : 0,43 m/s
Daylight between colums : 4500 mm
Max. Drawing depth : 300 mm
Strokes per minute, continuous running,
infinitely variable : 8 - 18
Strokes per minute, single stroke,
infinitely variable : 6,4 - 14,4
Stroke of ram : 1016 mm
Stroke of blankholder : 863 mm
Clamping surface of table
Width x Depth : 4030 x 2438 mm
Clamping surface of blankholder
Width x Depth : 4200 x 2540 mm
Clamping surface of ram
Width x Depth : 3660 x 1984 mm
Adjustment of ram and blankholder : 508 mm
Max. distance bed / ram,
stroke down, adjustment up : 2550 mm
Max. distance between bed / blankholder,
stroke down, adjustment up : 2050 mm
Going up of ram before take off
of blankholder : 25 mm
Capacity of adjustable main drive ca. : 160 kW
Speed of adjustable main drive ca. : 1500 Upm
Motor for ram and blankholder
adjustment : 7,5 kW
Speed, each : 1500 rpm
Height over floor : 10700 mm
Lateral opening
The machine is prepared to the later installation of a
3-part compressed air equipment in the table.
1971 Good Condition Photo
161 MA24922 Weingarten VU500.28.45-501 Capacity : 500 Tons
Distance between columns : 2800 mm,
No of strokes : 14 min,
Table surface area : 2750 x 1800 mm,
Ram surface : 2750 x 1800 mm,
1550 mm,
Ram adjustment : 500 mm,
110 t, 70 t, 4050 mm, 5050 mm,
Total power requirement kW,
Dimensions of the machine : 4,6 x 1,8 x 5,4 mm,
Weight of the machine t.
1954 / 09 / 2000 Good Condition Photo
162 MA24921 Weingarten VU500.28.45-502 Distance between columns : 2800 mm,
No of strokes : 14 min,
Table surface area : 2750 x 1800 mm,
Ram surface : 2750 x 1800 mm,
1550 mm,
Ram adjustment : 500 mm,
110 t, 70 t, 4050 mm, 5050 mm,
Total power requirement kW,
Dimensions of the machine : 4,6 x 1,8 x 5,4 mm,
Weight of the machine t.
1954 / 09 / 2000 Good Condition Photo
163 MA24919 Weingarten DQ300.20.32 Capacity : 300 Tons, Table area 1700 x 1200 mm, Ram stroke 320 mm, Ram adjustment 200 mm, Shut height max. 820 mm, Shut height min. 460 mm, Ram area 1700 x 1200 mm, Distance between columns 1800 mm, Number of strokes 8 - 24 s.p.m., Cushion in bed / stroke 80 t adjustable / 160 mm,Cushion in ram / stroke 30 t / 160 mm, with cushion in bed and ram 1974/2000 Good Condition Photo
164 MA24918 Weingarten DK250.16 Distance between columns : 1550 mm,
Stroke of slide : 320 mm,
Ram adjustment : 120 mm,
820 mm, 700 mm, 1600x1300 mm,
Table size : 1600 x 1300 mm,
Ram Surface : 1500 x 1200 mm,
No. of stroke : 18 min,
Counter pressure : 20 t,
160 mm, 30 t, 160 mm,
Total power requirement kW,
Dimensions of the machine m,
Weight of the machine t.
1956 Good Condition Photo
165 MI5774 Niagara Capacity : 400 Tons,
Bed size 1800 x 1000 mm,
Top (Ram) size 1680 x 900 mm,
No. of T-slots 10, T-slots pitch 150 mm,
Stoke 300 mm,
Slide adjustment 200 mm,
Shut height 450 ~ 650 mm,
Speed 16 rpm,
Cushion stroke 160 mm,
Cushion pitch 150 mm,
No. of cushion rows: -Left to Right 10 nos. - Front to Back 6 nos.
Good Condition Photo
166 MI5773 Pels Capacity : 600 Tons,
Bed size 2800 x 1600 mm,
Top (Ram) size 2610 x 1380 mm,
No. of T-slots 8, T-slots pitch 300 mm,
Stroke 600 mm, Slide adjustment 350 mm,
Shut height 450 ~ 700 mm,
Speed 16 rpm,
Cushion stroke 175 mm,
Cushion pitch 150 mm,
No. of cushion rows: -Left to Right 16 nos. - Front to Back 8 nos,
With Independent control panel with required control switches.
Good Condition Photo
167 MA24892 Natori,Japan Capacity : 500 Tons
Stroke per min : 12,
Die height 1100 mm,
Bolster 3000 x 2000 mm,
Slide : 2820 x 1900 mm,
Adjust : 400 mm,
Die cushion:
Capacity : 150 ton,
Stroke : 250 mm,
Pad size : 2500 x 1600 mm.
Very good condition Photo
168 MA24807 TMP Voronezh Russia KB3537.01 500 tons, slide stroke 250mm, table dimensions 2500 x 1400mm, slide dimensions 2380 x 1200mm, overall dimensions 4350 x 2470 x 5660mm, height above floor 5660mm, press weight 70 tons. With moving bolster, Press with pneumatic die cushions . 1987 Good working condition Photo
169 MA24775 Kieserling SKPN800/2000 Distance between columns : 2000 mm,
Height adjustment : 400 mm,
Mould space max : 800,
Die cushion pressure : 32t bei 6,
Die cushion pneum. pressure / stroke : 80t bei 6a,
Table surface area : 1800 x 1400 mm,
Height over floor : 650 mm,
Ram surface : 1800 x 1400 mm,
Thickness of slide plate : 225,
Min ram stroke : elektr.reelbar 14-2 mm,
No of stroke at continou stroke : 20-40 min,
Total power requirement : 135 kW,
Dimension of the machine : 3,20 x 1,60 x 9,20 mm,
Weight of the machine : 136 ton.
Drawing cushion stroke table : 200 mm,
Drawing cushion stroke ram : 150 mm,
Max distance between table and ram plate, with ram stroke down, adjustment on the top : 800 mm,
With hydraulic overload protection.
Die cushion.
1960/1989 Good Condition Photo
170 MA24757 Kieserling SKPN800/2000 Capacity : 800 ton,
Distance between rams : 2000 mm,
Distance between guide ways : 1830 mm,
Stroke : 600 mm,
Min / Max Distance between table and ram : 400 / 800 mm,
Ram adjustment : 400 mm,
Ram dimension : 1800 x 1400 mm,
Thickness ram plate : 225 mm,
Stroke min : 14-20,
Max capacity of ram cushion : 32 ton,
Table dimension : 1800 x 1400 mm,
Thickness table plate : 225 mm,
Main motor : 105 kw,
Ram adjustment : 7,5 kw,
Cushion adjustment : 5,5 kw,
Equipped with decoiler : 10ton,
Combined straightening and feed device,
Width : 300-1300 mm,
Thickness : 0,8-6 mm.

Please see video at:

http://www.youtube.com/watch?v=87S9RtKZPj0
Good Condition Photo
171 MA24751 Kawasaki Machinery HMP2-600-291 B : 3200 x 1000 mm,
Stroke : 900 mm,
Dlight : 1100 mm,
Slide : 300 spm,
Capacity : 600 tons.
1990 Good Condition Photo
172 MA24743 AIDA,Japan PDW20 Capacity : 200 ton,
Stroke length : 300 mm,
No of stroke : 20 spm,
Bolster size (RL x FB) : 2000 x 1220 mm,
Slide size (RL x FB) : 1830 X 1000 mm,
Distance between slide and bolster : 850 mm,
Slide adjustment : 430 mm,
Bolster thickness : 120 mm,
Bed hole size (RL x FB) : 730 X 730 mm x 2 spots,
Used air pressure :-
Balance - 4 kg/cm2,
Clutch - 4 kg/cm2,
Die cushion type : 2 Pads 2 Cylinders 2 layers,
Capacity : 16.7 ton x 2 units = 33.4 ton,
Effective stroke : 150 mm,
Working stroke : 160 mm,
Pad area : 700 x 700 mm x 2,
Stroke adjustment : 150 mm.
1979 Good Condition Photo
173 MA24742 Sato D30 Capacity : 300 ton,
Stroke : 450 mm,
Stroke per minute : 18,
Bolster : 2130 x 1370 mm,
Slide : 2130 x 1370 mm,
Die Height : 860 mm,
Slide Adjust : 400 mm,
With Die Cushion.
Good Condition Photo
174 MA24729 TMP Voronezh Russia KB3537 500 tons, slide stroke 250mm, table dimensions 2500 x 1400mm, slide dimensions 2380 x 1200mm, overall dimensions 4350 x 2470 x 5660mm, height above floor 5660mm, press weight 70 tons. Press with pneumatic die cushions . 1980 Good Condition Photo
175 MA24727 Niagara BP2-200-60-42 Tonnage Capacity : 200 ton,
Stroke length : 250,
Shut height to bed (SDAU) : 675 mm,
Ram adjustment (Power) : 250 mm,
Bed area,L-R x F-B : 1500 x 1050 mm,
Bed opening L-R xF-B : 1125 x 675,
Speed variable : 30 to 60 SPM ,
Overall dimensions : L-R x F-B : 75,225 x 52,675
Overall height : 97,650
Floor space L-R x F-B : 52,575/52,650,
equipped with :
air clutch and brake,
air counterbalance,
air cushion,
variable speed drive,
1,500 x 1,050 x 150 T-slotted bolsterplate,
double roll feed and scrap chopper,
toledo transducer digital presswatch production monitir w/auto set,
light curtain.
1972 Good Condition Photo
176 MA24683 AIDA,Japan PDW200 Capacity : 200 ton,
Stroke : 300 mm,
SPM : 20,
Bed : 2000 x 1220 mm,
Die height : 850 mm,
Adjust : 430 mm.
Good Condition Photo
177 MA24682 OKK DCM200B Capacity : 200 mm,
Stoke : 400 mm,
SPM : 18,
Adjust : 200 mm,
Die height : 700 mm,
Bolster : 1800 x 1200 mm,
Cushion : 40 ton x 2,
Stroke : 200 mm,
Pad : 1300 x 1000 mm.
Good Condition Photo
178 MA24681 Erfurt PE2U315 FS Max. ram force : 315 ton,
slide stroke : 400 mm,
Slide adjustment : 320 mm,
No. of strokes per 1 min : 25,
Bed area : 2500 x 1450 mm,
Slide area : 2500 x 1400 mm,
Shut height : 900 mm,
Table cushion : 63 ton,
Main motor power : 45 kw,
Height above floor level : 710 mm,
Press weight : 71,3 ton.
1987 Good Condition Photo
179 MA24623 Kurimoto,Japanese S2-600-215-150 Capacity : 600 tons,
Stroke : 500 mm,
Dai height : 1100 mm,
Slide adjust : 200 mm,
SPM : 10-24,
Slide : 2150 x 1500 ,
Bolster : 2150 x 1500 x 230 ,
Die cushion : 1 pad , 2 cylinder,
Pad capacity : 120 ton,
Pad size : 1840 x 880 mm.
1981 Very good condition Photo
180 MA24621 Russian K3033A 200 tons ,table dimensions 1250 x 2000 mm, ram stroke 320 mm, 32 stroke/min, ram adjustment 200 mm, shut height 670 mm. 1993 Good working condition Photo
181 MA24620 TMP Voronezh Russia KB3534A 250 tons, ram stroke 400 mm, no. of ram stroke 25 per min., shut height 750 mm, bed to ram adjustment stroke 250 mm, bed dimensions 2500 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 160 mm, main drive motor power 40 kW, overall dimensions: 4555 x 2900 x 6850 mm, weight 52 tons. 1981 Good working condition Photo
182 MA24610 Komatsu E2S400MF Capacity : 400 tons,
Stroke : 500 mm,
Shut Height : 1720 mm,
Die Height : 1100 mm,
Adjust : 600 mm,
Stroke per minutes : 20,
Bolster : 2500 x 1520 mm,
Slide : 2500 x 1520 mm,
Cushion : 2 x 40 = 80 tons,
Pad Area : 2000 x 1060 mm,
Cushion Stroke : 250 mm,
With Moving Bolster.
Good Condition Photo
183 MA24556 Komatsu Capacity : 80 tons,
Stroke : 130 mm,
SPM : 60 mm,
Bolster : 1000-600-110 mm,
Slide : 500-400 mm,
Die height : 350 mm.
1985 Good Condition Photo
184 MA24531 WMW Erfurt,Germany PKZZIV500.1FS Centres of pressure : 2,
Maximum force of slide : 500 t,
Stroke of slide : 500 mm,
Adjustability of slide : 500 mm,
Max. daylight between bolster and slide : 1100 mm,
Width between columns : 2800 mm,
Slide area ( W X D): 2800 x 1700 mm,
Bed area ( W x D) : 2800 x 1800 mm,
Opening in bed ( W x D ) : 2400 x 1250 mm,
Main motor power : 75 kw,
Idle stroke rate per min : 20,
Counterpressure of cushion in bed : 100 T,
Stroke of cushion plate : 200 mm,
Height above ground : 7600 mm.
1982 Excellent Photo
185 MA24467 Cowlishaw Walker S4-300-84-12 Capacity : 300 tons,
Slide stroke : 300 mm,
Stroke adjustment : 300 mm,
Bed area : 1200 x 2200 mm,
Bolster thickness : 175 mm,
Max shut height : 500 mm,
Max day light at TDC : 700 mm,
Min day light at BDC : 400 mm,
No of cushions : 2 nos,
Cushion force : 60 tons,
Cushion stroke : 150 mm,
Cushion type :Air,
Press speed : 18 stroke / min.
Good Condition Photo
186 MA24451 WMW Erfurt,Germany PKZZI315-2500 Max Capacity : 315 ton,
Table size : 2500 x 1400 mm,
Slide stroke : 400 mm,
Slide stroke per 1 min : 25,
Slide adjustment : 400 mm,
Slide area : 2450 x 1400 mm,
Distance between columns : 2500 mm,
Table height over floor : 480 mm,
Daylight : 1080 mm,
Shut height (stroke down-adjustment up): 900 mm,
Die cushion capacity : 63 ton,
Die cuschion stroke : 160 mm,
Voltage : 380 V,
Main motor power : 45 kW,
Total power requirement: 70 kW,
Press dimensions : 4300 x 2500 x 6000 mm,
Weight of the machine : 60 ton.
1981 Good Condition Photo
187 MA24448 British Clearing Capacity : 600 ton,
Distance between columns mm,
Stroke : 609 mm,
Table surface area : 4500 x 2540 mm,
Stroke speeds : 12 m,
Power requirement ... kW,
Dimension of the machine ... mm,
Weight of the machine ... ton
1947 Very good condition Photo
188 MA24418 TMP Voronezh Russia K378A Capacity :1000 tons, ram stroke 400 mm, SPM 20, shut height 1060 mm, adjustment 320 mm, ram dimensions 3150 x 1700 mm, moving table dimensions 3150 x 1800 mm, bolster plate thickness 260 mm, height above floor level 7830 mm, main motor power 132 kW, dimensions 5150 x 4700 mm, weight 193 tons.
Qty : 2 Nos.
1980 Good Condition Photo
189 MA24417 WMW Erfurt,Germany PE2U315-2500-1450 Max. force of ram 315 tons,
ram stroke 400 mm,
ram adjustment 320 mm,
max.shut height 900 mm,
distance between columns 2500 mm,
ram size (width x depth) 2500 x 1450 mm,
table size (width x depth) 2500 x 1450 mm,
table bore 2280 x 1020 mm,
main motor power 45kW,
No. of stroke/min 25,
die cushion capacity 63 tons,
travel of plate of cushion 160 mm,
approx. height over floor 7100 mm.
Qty : 2 Nos.
never used Photo
190 MA24279 Russian K3033B 200 tons ,table dimensions 1250 x 2000 mm, ram stroke 320 mm, 32 stroke/min, ram adjustment 200 mm, shut height 670 mm. Good Condition Photo
191 MA24254 TMP Voronezh Russia KB3539 800 tons , table dimensions 2500 x 1600 mm, stroke 320 mm, 25SPM , shut height 650 mm, ram adjustment 320 mm, ram dimensions 1400 x 400 mm, tool cushion capacity 80 tons, cushion stroke 90 mm, upper ejector capacity 40 tons , main motor power 90 kW, dimensions 4200 x 4860 mm, height above floor level 6410 mm, weight 96 tons. 1981 Good working condition Photo
192 MA24245 WMW Erfurt,Germany PKZZI1250/4000 Maximum force of slide : 1250 mm,
Width between columns : 4000 mm,
Table dimensions : 4000 x 1800 mm,
Machine Weight : around 250000 kg.
1981 good working condition,complete Photo
193 MA24206 Clearing F4500-186 Capacity : 450 ton,
Distance between the columns L- R : 4774 mm,
Distance between the columns F- B : 2300 mm,
Stroke : 304 mm,
Shut height (S.D.A.U) : 1219 mm,
Table surface : 4724 x 2743 mm,
Number of strokes : 18 spm,
Main motor : 41,3 kW,
Ram adjustment : 508 mm,
Dimensions of the machine : 6808 x 3700 x 6900 mm,
Weight of the machine : 150 ton.
1957 Very good condition Photo
194 MA24205 Kieserling ZKP400/2000 Capacity : 400 ton,
Distance between the columns : 2000 mm,
Stroke : 450 mm,
Table surface : 1960 x 1250 mm,
Number of strokes : 14 SPM,
Main motor : 56 kW,
Dimensions of the machine : 3500 x 2400 x 8300 mm,
Cushion in bed : 60 t,
Cushion stroke : 225 mm,
Ejector stroke : 150 mm,
Ejector in ram : 30 t,
Weight of the machine : 73 ton.
1956 Very good condition Photo
195 MA24204 WMW Erfurt,Germany PKZZ315 Capacity : 315 ton,
Table surface : 2500 x 1400 mm,
Ram surface : 2450 x 1400 mm,
Table height over floor : 480 mm,
Stoke of the ram : 400 mm,
Ram adjustment : 400 mm,
Shut height (S.D.A.U) : 1080 mm,
Cushion in bed : 63 t,
Cushion stroke : 160 mm,
Distance between the columns L - R : 2500 mm,
Side opening : 700 x 630 mm,
Number of strokes : 13 spm.
1978 can be inspected under power Photo
196 MA24200 Schuler German DB1-250-1-25-0-56 Capacity : 250 ton,
Distance between the columns : 1260 mm,
Side opening : 750 x 670 mm,
Stroke : 575 mm,
Slide adjustment : 100 mm,
Shut height (S.D.A.U) : 940 mm,
Table surface : 1200 x 1250 mm,
Number of strokes : 12 - 20 min,
Main motor : 60 kW,
Dimensions of the machine : 5920 x 3700 x 5000 mm,
Weight of the machine : 40 ton.
1970 Very good condition Photo
197 MA24184 WMW PEDH 160 Capacity : 160 tons,
Table 1250 x 860 mm,
Stroke : 8-160 mm,
Shutheight :560 mm.
1988 Good Condition Photo
198 MA24143 TMP Voronezh Russia K3540 Capacity 1000 tons, ram stroke 400 mm, SPM 20, shut height 1060 mm, adjustment 320 mm, ram dimensions 3150 x 1700 mm, moving table dimensions 3150 x 1800 mm, bolster plate thickness 260 mm, height above floor level 7830 mm, main motor power 132 kW, dimensions 5150 x 4700 mm, weight 193 tons. with 2 cushions , 1977 Good Condition Photo
199 MA24097 LVD SE2-2000-3250-1250 Capacity 2000 ton,
Clutch pneumatic,
Max adjustable stroke 500 mm,
Passage between uprights 3300 mm,
Distance between table -- ram 1080 mm,
Dimension of the table 3250 x 1250 mm,
Electric motor power 200 kW,
passage in the side: 700 mm,
16 strokes per min,
gear drive in oil bath with double transfer
- motorized sled adjustment
- pneumatic sled balancing
- LVD-Sommer airclutch
- continuous automatic lubrication with recuperation
- prestressed construction using 4 hydraulic nuts.
Good Condition Photo
200 MA23926 Danly SS2-250-84-36 Tonnage Capacity : 250 ton,
Stroke : 300 mm,
Ram adjustment : 375 mm,
Shut height to bed : 1200 mm,
Area of bed : L-R 2100 x F-B 900 mm.
Equipped with :
Air clutch and brake,
Dual palm buttom operation,
Link Control.
(3)Cushions.
Good Condition Photo
201 MA23823 WMW Erfurt,Germany PKZZI1250 1250 tons , table dimensions 4000 x 1800 mm ,max. drawing depth 250 mm, table opening 3750 x 1300 mm, ram dimensions 3950 x 1800 mm , shut height 1165 mm , stroke 630 mm , adjustment 630 mm , 11 SPM , main motor power 132 kW , distance between columns 4000 mm , ejector capacity 40 tons, drawing depth adjustment 250 mm,weight 245 tons 1975 Good working condition Photo
202 MA23783 Schuler German E4-540-3.66-620 Capacity 540T (rated at 25mm at B.D.C.),
Bed Area 3660 x 1830 mm,
Slide Area 3660 x 1830 mm,
Stroke 610 mm,
Slide Adjustment 610 mm,
Shut Height (S.D.A.U.) 1575 mm,
S.P.M. 16,
Cushion fitted to bed (2 off) Capacity 112T,
Cushion Stroke 305 mm adjustable,
Platen Area L - R x F - B 595 x 1180 mm,
Hydraulic Locking Device Fitted,
Main Motor 55Kw,
Overall height floor to top of press 7900 mm.
Very good condition Photo
203 MA23782 WMW Erfurt,Germany PKZZ250 Capacity : 250 ton,
Ram stroke : 400 mm,
Ram stroke per minute : 12...24 mm,
Shut height : 720 ,
Bed : 2500 x 1400 mm,
Quantity : 2 presses available.
1983 Good Condition Photo
204 MA23738 Fukui Capacity : 300 ton,
Stroke : 450 mm,
SPM : 15 mm,
Slide adjust : 200 mm,
Slide : 2130 x 1370 mm,
Bolster : 2130 x 1370 mm,
Die height : 850 mm,
Main motor : 22 kw,
Die cushion : 30 ton x 2 = 60 ton,
Stroke : 230 mm,
Pad : 900 x 950 x 2.
Good Condition Photo
205 MA23737 Fukui Capacity : 300 ton,
Stroke : 450 mm,
SPM : 15,
Slide adjust :200 mm,
Slide : 2130 x 1370 mm,
Bolster : 2130 x 1370 mm,
Die height : 850 mm,
Main motor : 22 kw,
Die cushion : 60 ton,
Stroke : 230 mm,
Pad : 815 x 830 mm.
Good Condition Photo
206 MA23735 WMW Erfurt,Germany PKZVIV500TS Maximum force of slide 500T, Centres of pressure 4, Stroke of slide 500 mm, Adjustability of slide 500 mm, Max. daylight between bolster and slide, SDAU 1000 mm, Width between columns 2800 mm, Slide area (W x D)2800x1800 mm, Bed area (W x D) 2800x1800 mm, Opening in bed (W x D)2400x1250 mm, Main motor power 75 kW, Idle stroke rate 20 per min 20, Counter pressure of cushion in bed-T 100, Stroke of cushion plate 200 mm, Height above ground 7350 mm, With two lateral Moving. Dismantled,Good condition Photo
207 MA23700 WMW Erfurt,Germany PKZZI800 Capacity : 800 t,
Nominal force : 8000 kN,
Ram stroke : 500 mm,
Number of strokes : 14 min,
Shut height : 1050 mm,
Bolster plate to ram adjustment stroke : 1050 mm,
Bed : 3150 x 1600 mm,
Ram : 3150 x 1600 mm,
Stroke of pneumatic table : 200 mm,
Cussions power : 1600 kN,
Main drive motor : 90 kW,
Dimensions of press L x W : 6000 x 3000 mm,
Height above floor level : 8000 mm,
Weight of Press : 145 t.
1981 / 2006 Good Condition Photo
208 MA23657 Mori Iron Works ETD600-30-50 Strock : 400 mm,
Bolster : 3000 x 1700 mm,
Die Height : 1000 mm,
With die cushion.
1973 Good Condition Photo
209 MA23576 Minster SE4 800-168-84 Capacity : 800 tons,
Stroke : 450 mm,
Shut Height : 1050 mm,
Ram adjustment : 300 mm,
Bed size : 4200 x 2100 mm,
0-30 SPM ,
Windows : 1800 x 1450 mm,
Drive motor : 100 HP,
Equipped With:
Wintriss smart pak 2 press control,
Monitor f;ow lubrication,
(2) Rolling bolsters,
HMS transfer system,
8- Point Gibs,
4- Point Drive,
Hydraulic tie rod nuts,
full guarding,
T- Slotted Bolsters,
T- Slotted Ram Face,
Diamensions : 6000 H, 5550 R-L, 2575 F-B.
1990 Good condition,under power Photo
210 MA23542 Clearing S4-800-108-66 800 ton, Bed Size : 2700mm x 1650mm, Stroke : 600 mm, Stroke / Min : 16, Shut Height : 1100 mm, Adjustment : 300 mm, Window : 1800 mm, Main Motor : 100 HP, with 1800 rpm, Cushions : 2 x 150 Tons Each, Hydraulic Over Loads, Hydraulic Die Plate Clamping, Hydraulic Torc-Pac Clutch, Dual Rolling Bolster, Rolling L-R and going thru window. Weight of the machine : 150 Ton Approx. Qty: 2 Nos. Good Condition Photo
211 MA23541 AIDA,Japan QD-40 Stroke per min : 12 - 20,
Bolster : 2750 x 1700 mm,
Die Cushion : 120 tons,
Stroke : 220 mm,
Pad : 2750 x 1250 mm.
Very good condition,Under power Photo
212 MA23540 Sato PDC-ST-350 Stroke per min : 15,
Bolster : 2130 x 1370 mm,
Slide : 2130 x 1370 mm,
Shut Height : 1860 mm,
Slide Adjust : 200 mm,
With : Optical Safety Device,
Die Cushion : 45 ton,
Stroke : 230 mm,
Pad : 840 x 820 mm ( 2 pads, 2 Cylinders).,
Quantity : 3 nos.
1975 Very good condition,Under power Photo
213 MA23539 Sato CL-500-215-135 Capacity : 500 ton,
Stroke : 500 mm,
SPM : 15 - 20,
Bolster : 2150 x 1350 mm,
Slide : 2150 x 1350 mm,
Die Height : 1000 mm,
Slide Adjust : 400 mm,
Die Cushion : 80 ton,
Stroke : 250 mm,
Pad : 1700 x 1100 ( 1 pad, 2 Cylinders).
1975 Very good condition,Under power Photo
214 MA23500 Verson Bolster size : 256 x 54,
Stroke : 700 mm,
Shut Height : 1300 mm,
Slide Adj : 125 mm,
Strokes / Min : 10-20.
1970-75 Good Condition Photo
215 MA23419 WMW Erfurt,Germany PKZVIV500TS Centres of pressure 4,
Maximum force of slide 500T,
Stroke of slide 500 mm,
Adjustability of slide 500 mm,
Max. daylight between bolster and slide, SDAU 1000 mm,
Width between columns 2800 mm,
Slide area (W x D)2800x1800 mm,
Bed area (W x D) 2800x1800 mm,
Opening in bed (W x D)2400x1250 mm,
Main motor power 75 kW,
Idle stroke rate 20 per min 20,
Counter pressure of cushion in bed-T 100,
Stroke of cushion plate 200 mm,
Height above ground 7350 mm,
1984 Good Condition Photo
216 MA23377 AIDA,Japan 150 tons, ram stroke 220 mm, 20 SPM , table size 780 x 1000 mm, ram size 780 x 1000 mm, shut height 800 mm, ram adjustment 15 mm, main motor power 150 kW. Good Condition Photo
217 MA23362 WMW Erfurt,Germany PKZZ1250FS 1250 tons , ram stroke 630 mm , 11 SPM , shut height 1165 mm , bolster plate to ram adjustment stroke 630 mm , bed 4000 x 1800 mm , ram 3950 x 1800 mm , stroke of pneumatic cushion/table 250 mm , cushions power 250 tons , main drive motor 125 kW , dimensions 7000 x 4300 x 9500 mm , press weight 245 tons. With moving bolster, Hydraulic overload system & Pneumatic cushions. 1986 Excellent Photo
218 MA23348 WMW Erfurt,Germany PKZZ250 Max. force of ram 2500 kN, Ram stroke 400 mm, Adjustment of ram 120 mm, Max. Shut height 580 mm, Distance between columns 2500 mm, Ram size (widthxdepth)2320x1250 mm, Table size (widthxdepth)2500 x 1400 mm, Bore in table 2300 x 850 mm, Main motor power 32 kW, No. of strokes/min 12, Capacity of die-cushion 500 kN, Travel of plae of cushion 160 mm, Approx. height over floor 5000 mm.
Qty. 2 Nos.
1984 Good Condition Photo
219 MA23298 British Clearing S4-500-186-108 500 Tons,
Bed size 4700 x 2400 mm,
Ram stroke 300 mm,
ram adjustment 490 mm,
shut height 975 mm,
Speed 15 to 28 SPM,
Required power kw 110 - 380 Colt 3 ph,
With 2 moving bolster.
1985 Good Condition Photo
220 MA23296 Danly 500 Tons. Good Condition Photo
221 MA23295 Raskin 400 Ton. Good Condition Photo
222 MA23284 Raskin 200 Tons, With cushions. Qty: 3 Nos. Good Condition Photo
223 MA23282 Bret PAFR25 250 Ton. Qty : 2 Nos. Good Condition Photo
224 MA23279 Roche 2MB300-1600 300 Tons, 2 column, 1600 x 1300 mm cushion. Good Condition Photo
225 MA23278 Agostino Colombo 315 tons. Good Condition Photo
226 MA23277 Bliss SE400 400 Tons. Good Condition Photo
227 MA23235 Erfurt PKZZ315FS Ram stroke : 400 mm,
Shut height : 900 mm,
Ram adjustement : 400 mm,
Table dimensions : 2500 x 1400 mm,
Ram dimensions : 2500 x 1400 mm,
Distance between columns : 2600 mm,
Hydraulic overload protection,
Number of strokes 25/min,
Main motor 46 kw,
Dimensions : 7500 x 3700 x 2500,
Height from the floor : 6350 mm,
Electrical and mechanical part complet,
Force 315 T,
Number of points 2.
Good Condition Photo
228 MA23233 WMW Erfurt,Germany PKZZIV500.1TS Max. Pressure 500 t,
Max. power of ram (at 12,5 mm stroke): 500 mp,
Power if ram (at 200 mm stroke) 160 mp,
No. of stroke -idle run 20/min,
Distance between columns 2800 mm,
daylight 1100 mm,
Stroke of ram 500 mm,
Adjustment oif ram 500 mm,
Ram size 2800 x 1800 mm,
Table size 2800 x 1800 mm,
Die cushion stroke 200 mm,
Total power requirement 75kW,
Height above floor 7350 mm.
With movable table.
1977 Good condition,under power Photo
229 MA23232 WMW Erfurt,Germany PKZZI315 Max. Pressure 315 t,
Table surface area 2500 x 1400 mm,
Ram surface area 2450 x 1400 mm,
Stroke of ram 400 mm,
Ram adjustment 400 mm,
No. of strokes 18/min,
Draw depth 160 mm,
Distance between ram-table 950 mm,
Power of counter ejector 630 kN,
Power requirement 62kW,
Total weight of the machine 60t.
1985/2001 Dismantled,Good condition Photo
230 MA23204 TMP Voronezh Russia KB3534A 250 tons, ram stroke 400 mm, no. of ram stroke 25 per min., shut height 750 mm, bed to ram adjustment stroke 250 mm, bed dimensions 2500 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 160 mm, main drive motor power 40 kW, overall dimensions: 4555 x 2900 x 6850 mm, weight 52 tons. 1982 Good Condition Photo
231 MA23180 WMW Erfurt,Germany PKZZ315 Pressure 315 t,
table-size 2500 x 1400 mm,
stroke 400 mm,
strokes of ram per min. 25,
passage width 2550 mm,
ram surface 2450 x 1400 mm,
column travel -side 1425 x 1200 mm,
ram adjustment 400 mm,
shut height (stroke down, adjustm. up) 900 mm,
die cushion pneum. pressure/stroke 63 t/ 160 mm,
voltage 380 V,
total power requirement 70 kW,
weight of the machine ca. 60 t,
power main drive with 45 kW,
dimensions of the machine ca. 4,5 x 3,2 x 6,1 m.
Machine has pneumatic clutch and cushion in table.
1981 Good Condition Photo
232 MA23179 WMW Erfurt,Germany PKZZ250/2500 Max. force of ram 2500 kN,
Ram stroke 400 mm,
Adjustment of ram 120 mm,
Max. Shut height 580 mm,
Distance between columns 2500 mm,
Ram size (widthxdepth)2320x1250 mm,
Table size (widthxdepth)2500 x 1400 mm,
Bore in table 2300 x 850 mm,
Main motor power 32 kW,
No. of strokes/min 12,
Capacity of die-cushion 500 kN,
Travel of plae of cushion 160 mm,
Approx. height over floor 5000 mm.
1976 Good Condition Photo
233 MA23070 Russian KA3132 160 tons, slide stroke 250mm, 40spm, shut height 610, bed to ram adjustement stroke 160 mm , ram axis to frame distance (overhang) 535 mm , distance clear between columns 1810 mm , bed dimensions 2000x750mm,ram dimensions 1500 x 630 mm , bolster plate thickness 100 mm , 22kW,dimensions 2940 x 2990 x 4750 mm , weight 26.2 tons Good Condition Photo
234 MA23053 Russian K05.105 500 tons , Stroke of ram 250 mm ,
Rate of ram 250 RPM ,
Area of bolster 2500x1400 mm,
Shut Height 750 mm,
Adjustment of distance between the bed bolster and the ram bolster 250,
Overall dimensions of press, mm
4740 x 2750 x 6145 mm ,
Actuator capacity 47 KW,
Weight of press 60.7 tons.
1983 Good Condition Photo
235 MA23047 WMW Erfurt,Germany PKZZ250/2500 250 tons, ram stroke 400 mm, no. of strokes 25/min., ram adjustment 120 mm, shut height 720 mm, bed 2500 x 1400 mm, windows in bed 2300 x 850 mm, ram 2320 x 1250 mm, main drive motor 32 kW, 1971 Good Condition Photo
236 MA23022 Clearing Capacity : 400 Ton,
Ram size : 2882 x 1828 mm,
Ram Stroke : 609,6 mm,
Speed : 18 min.
Qty: 2 Nos.
Good Condition Photo
237 MA23021 Clearing SE5400KN Capacity : 600 Ton,
Ram size : 2882 x 1828 mm,
Ram Stroke : 609,6 mm,
Speed : 18 min,
Adjustment of ram : 255,6 mm,
Moving bolster : 27432 x 18288 mm
Qty: 2 Nos.
1960 Good Condition Photo
238 MA22992 Fukui 400 ton,
Bolster : 2500 x 1350 mm,
Stroke : 450 mm,
Shut height : 350 mm.
1968 Good Condition Photo
239 MA22946 Mecfond SE4600.335.213 Ram Capacity : 600 ton,
Travel X axis : 3350 mm,
Travel Y axis : 2135 mm,
Stroke : 610 mm,
Slide adjustment : 310 mm,
SDAU light : 1110 mm,
Variation : Adjustable,
Number of strokes : 16-20 Variabile,
Security : Hydraulic overload,
Table dimensions X : 3350 mm,
Table dimensions Y : 2134 mm,
Lateral passage yes,
Size : 1600 mm,
Machine Height : 7310 mm,
Machine Weight : 173000 kg..
Fixed Bed & No cushions.
1975 Disassembled Photo
240 MA22944 Weingarten VK500.31.85 Capacity : 500 ton,
Travel X axis : 2900 mm,
Travel Y axis : 1800 mm,
Ram Stroke : 850 mm,
SDAU light : 1600 mm,
Variation : 2 speeds,
Number of strokes : 12-16,
Security : Hydraulic overload,
Table dimensions X : 3000 mm,
Table dimensions Y : 1800 mm,
Downer blankholder Capacity : 195 ton,
Stroke : 300 mm,
Lateral passage yes,
Frontal light : 3150 mm,
Motors power : 75 HP,
Total requried power : 75 HP,
Machine Weight : 200 tons
Qty : 2 nos.
1958 Very good condition Photo
241 MA22943 Schuler German T2-630-6-630 Ram Capacity : 630 ton,
Travel X axis : 4400 mm,
Travel Y axis : 1500 mm,
Stroke : 300 mm,
Regolazione : 250 mm,
SDAU light : 800 mm,
Variation : 2 speeds,
Number of strokes : 15-30,
Security : Hydraulic overload,
Table dimensions X : 4400 mm,
Table dimensions Y : 1500 mm,
Lateral passage yes,
Size 1500 mm,
Frontal light : 3270 mm,
Motors total required power 110 kw,
Height : 7000 mm.
Refurbished in 2007 Good Condition Photo
242 MA22935 Arisa SE2-400-4 Capacity : 400 Ton,
Bed Size : 2800 x 1200 mm,
Stroke : 460 mm,
Speed : 10/30 SPM.
1981 Good Condition Photo
243 MA22934 Arisa SE2-400D Capacity : 400 Ton,
Table Size : 2800 x 1200 mm,
Stroke : 460 mm,
Speed : 10/30 n.
1986 Good Condition Photo
244 MA22931 Weingarten VK6303320 Capacity : 630 Ton,
Table size : 3000 x 2100 mm,
Stroke : 200 mm,
Speed : 25 - 100 SPM.
1973 Good Condition Photo
245 MA22805 Amino SD300C Capacity 300 x 120 ton.F,
Stroke 850 mm,
Daylight 1500 mm,
Table 1200 x 1000 mm.
2000 Good Condition Photo
246 MA22803 Clearing S2-250-84-48 250 Tons
Stroke 300 mm,
Shut Height Over Bed (SDAU 800 mm,
Power Ram Adjustment 275 mm,
Bed Area 2100 mm,
Slide Area 100 mm,
Window Opening 450 mm,
Speed 30 S.P.M.,
Distance Bed to Floor 1000 mm,
Electrical Characteristics 220/440 V.A.C.
3 Ph / 60 Cycle

Equipped With:
Complete Electrical Controls
T-Slotted Bolster Plugs
Lubrication System
Air Cushion

Overall Dimensions 3700 x 2625 x 2700 mm,
Weight 120,000 lbs (est.)
Very good condition Photo
247 MA22789 Baba GLSP250 Stroke 50 mm,
Die height 450 mm,
Slide 800 x 600 mm,
Bolster 980 x 1000 mm,
Main motor 11.4 KW,
Slide adjust motor 1.54 KW.
1998 Good Condition Photo
248 MA22788 Baba GLSP200 Stroke 50 mm,
Die height 450 mm,
Slide 800 x 600 mm,
Bolster 980 x 1000 mm,
Main motor 11.4 KW,
Slide adjust motor 1.54 KW.
1998 Good Condition Photo
249 MA22726 Kyodo,Yodogawa 150 tons (2 mm above BDC),
120- 200 SPM ,
stroke 25 mm ,
stroke down adjust up 340 mm ,
slide adjustment 50 mm ,
bolster area 1100x850 mm ,
bolster thickness 140 mm ,
slide area 1000x650 mm ,
bed hole area 900x280 ,
22 kW ,For production of Stator and Rotor lamellas, etc.



Including decoiler.
1973 Perfect Condition Photo
250 MA22695 WMW Erfurt,Germany PKZZI800/3150 Max. force of ram 8000 kN,
Ram stroke 500 mm,
Adjustment of ram 500 mm,
Max. Shut height 1050 mm,
Distance between columns 3150 mm,
Ram size (widthxdepth) 3100x1600 mm,
Table size (widthxdepth) 3150x1600 mm,
Bore in table 2950x1150 mm,
Main motor power 90 kW,
No. of strokes/min 14,
Capacity of die-cushion, 1600 kN,
Travel of plae of cushion 200 mm,
Approx. height over floor 8000 mm,
With Front moving bolster, With 2 cushions.
1981 rec 2004 Reconditioned Photo
251 MA22665 Krupp PDq4-4000/5.0/500 4000 tons, Number of strokes per minute 8 min-1
shut height 1250 mm
Table dimensions 50003000 mm
Ram dimensions 50003000 mm
Ram stroke 500 mm
Ram adjustment 500 mm
Main motor power 110 kW
Overall dimensions 50001000013780 mm
Weight of the machine 920 tons.
1982 Very good condition Photo
252 MA22596 Mori Capacity : 300 ton,
Stroke length : 410 mm,
Die Height : 635 mm,
Slide adjustment : 150 mm,
No of stroke : 18 spm,
Bolster size : 2,000 x 1,300 mm,
Slide size : 2,000 x 1,200 mm,
Distance from floor to bolster surface : 800 mm,
Bolster thickness : 215 mm,
Die cushion Type : Air pressure, 2 pads,
Capacity : (35ton x 2) unknown,
Stroke : 210 mm,
Main Motor : 37 kW.
1997 Good Condition Photo
253 MA22552 Amada,Japan SW300 Capacity 300 ton,
Stroke 300 mm
Adjust 120 mm
SPM 20-40,
Bed 2500 x 1550 mm,
Die Height 750 mm,
With Die Cushion.
Good condition,under power Photo
254 MA22550 Wasino,Japan Capacity 250 ton,
Bolster 2000 x 1200 mm,
Slide 1900 x 1200 mm,
Stroke 350 mm,
SPM 25,
Die Height 500 mm,
Adjust 200.
Good Condition Photo
255 MA22470 WMW Erfurt,Germany PKZV800 Capacity 800 ton,
Stroke 500 mm,
Number of strokes 14 s.p.m.,
Shut Height (S.D.A.U.) 1900 mm,
Adjustment 500 mm,
Table surface 4000 x 2500 mm,
Ram surface 3950 x 2500 mm,
Cushion in bed 220 t,
Cushion stroke 200 mm,
Cushion area 3710 x 1760 mm,
Motor 90 kW,
Weight approx. 217 ton.
With moving bolster and with cushion.
The press has new electric, PLC Siemens S7, new taper gip at the columns,new joints and gaskets.
With Frontal Moving Bolster.
Qty : 3 Nos
1971 / Overhauled in 2009 can be inspected under power Photo
256 MA22468 WMW Erfurt,Germany PE2U315FS Max. press capacity 315 tons, Max. press capacity 160 mm before NMT 1100 kN, Power at main motor 45 kW, Main sizes: distance between side columns 2500 mm, Ram stroke 400 mm, Ram Adjustment 320 mm, Max. shut height of press 900 mm, Height of pull out table 500 mm, Surface of table press 2500 x 1450 mm, Surface of ram of press 2500 x 1450 mm, Dimensions of press above floor 7100 x 4400 x 2750 mm, dimensions of press below floor level 4000 x 4900 x 3000 mm, With front moving bolster. 2 presses 1987 never used Photo
257 MA22428 Komatsu L2G400 Double Crank Press.400 tons ,
Stroke Length : 450 mm,
Stroke : 15~30spm,
Die Heights : 650 mm,
Bolster : 25001350 mm,
Die Cushion,
Orio Leveller Feeder.
1989 Good Condition Photo
258 MA22420 TMP Voronezh Russia KB3539 800 tons , table dimensions 2500 x 1600 mm, stroke 320 mm, 25SPM , shut height 650 mm, ram adjustment 320 mm, ram dimensions 1400 x 400 mm, tool cushion capacity 80 tons, cushion stroke 90 mm, upper ejector capacity 40 tons , main motor power 90 kW, dimensions 4200 x 4860 mm, height above floor level 6410 mm, weight 96 tons Excellent condition,under power Photo
259 MA22403 Russian K2130 100 tons,
Slider stroke length 10-130 mm,

Distance between table and slide - 100 mm,

Freguency of slide stroke - 80/min,

Frequency of courses of a slide 72 rpm,

Table 560x850 mm,

Table effective area width 630 mm,

Technological work: kJ,

- Individual course 3,35,

- Continuous course 1,6,

Closed forging height 380 mm ,

Height above floor level 2520 mm,

Press weight 7300 kg.

- 2 nos
1983 Good Condition Photo
260 MA22324 WMW Erfurt,Germany PEEII250 250ton, Length of worktable area:1200mm, Width of working table area:800mm,slide stroke:40-160mm, no. of slide strokes:50min, table dimensions:1250x800mm, slide dimensions:670x900mm, slide adjustment:110mm, shut height:500mm, main motor output:22kw, dimensions lxwxh:1445x2680x3275mm, machine weight:17,500kg Good Condition Photo
261 MA22309 WMW Erfurt,Germany PKZVIII500.1FS 500 tons, slide stroke 500 mm, strokes x minute 20 min, hydraulic overload, shut height 1200 mm, slide adjustment 400 mm, bed size 3150 x 2100 mm , moving bolster front to back, slide area 3150 x 2100 mm , upright opening 2200x1670 mm, bed cushion stroke 200 mm, power of main motor 75 kw, max height above floor 7500 mm, press weight about 140 ton. 1983 Good Condition Photo
262 MA22231 Schuler German S2-160-1.6 160 tons,
Table 1590 x 1000 mm,
No. of stroke 20-60spm,
Fix stroke of ram 240mm,
Height adjustment of ram 50 mm
ejectors
2 x die cushions
2 piston rod machine
mot. decoiler
straightening device
1972 Dismantled,Good condition Photo
263 MA22226 WMW Erfurt,Germany PKZZI1250 Max. force of ram 12500 kN, Ram stroke 630 mm, Adjustment of ram 630 mm, Max. Shut height 1165 mm, Distance between columns 4000 mm, Ram size (widthxdepth) 3950 x 1800 mm, Table size (widthxdepth) 4000 x 1800 mm, Bore in table 3750 x 1300 mm, Main motor power 132 kW, No. of strokes/min 11, Capacity of die-cushion 2500 kN, Travel of plae of cushion 250 mm, Approx. height over floor 9500 mm. 1986 Excellent ,unused Photo
264 MA22196 WMW Erfurt,Germany PKZZIII315FS 315 tons , slide stroke 400 mm, di height 900 mm, 25 SPM , die space 900 mm, die space adjustment 400 mm, upright space 2500 mm, table dimensions 2500 x 1400 mm, ram dimensions 2500 x 1400 mm, main motor 55 kW, cushion capacity in table 63 tons , cushion slide stroke 160 mm, overall dimensions 4800 x 2700 x 6350 mm, total weight of press 60 tons. Good Condition Photo
265 MA22178 WMW Erfurt,Germany PKZE1250/1600 1250 tons , slide stroke 500 mm, slide adjustments 250 mm, shut height 1100 mm, table 1600 x 1850 mm, slide 1300 x 1400 mm, cushion 300 tons. Good Condition Photo
266 MA22136 Clearing 2000ton, distance between the guides:832mm, Stroke of the slide:310mm, Slide dimensions front-back:1100xx1100, left-right
base dimensions front-back:1300x1200, max opening between the dies:890mm, bed adjustment:13mm, spm:65, motor power:120kW, Weight:165,000kg, overall dimensions:4051x4445x6446mm
Dismantled Photo
267 MA22134 Zani 150ton, Stroke Adustable:10-145, SPM:50, Ram dimensions:370x370, Double plate:1200x810, Ram adjustment 70, Motor:15, Weight:15,000kg working condition ,under power Photo
268 MA22095 Kobe,Japan 1200tons capacity
Bolster 3000 x 1700,
Slide 3000 x 1700,
Die Height 1300,
Stroke 800,
Slide Adjust 700,
SPM 10,
Die Cushion 200 ton,
Cushion Stroke 250 mm,
Moving Bolster:Front moving.
1965 Good Condition Photo
269 MA22041 TMP Voronezh Russia K3540 1000 tons, ram stroke 400 mm, SPM 20, shut height 1060 mm, adjustment 320 mm, ram dimensions 3150 x 1700 mm, bolster plate thickness 260 mm, height above floor level 7830 mm, main motor power 132 kW, dimensions 5150 x 4700 mm, weight 193 tons. with 2 cushions 1977 Dismantled,Good condition Photo
270 MA22034 WMW Erfurt,Germany PEE250 250 tons,Ram stroke 40-160 mm,no. of strokes 71 per min.,shut height 400 mm, table size 1250 x 800 mm, bottom ejector capacity 16 tons,bottom ejector stroke 80 mm, ram size 900 x 670 mm, ram ejector capacity 20 tons,ram ejector stroke 70 mm,plate thickness 100 mm, press weight 18 tons Good Condition Photo
271 MA22031 WMW Erfurt,Germany PKZ400 400 tons,ram stroke 315 mm,no. of strokes 18 per min.,table size 1000 x 1320 mm, adjustment of ram 200 mm,shut height 525 mm, distance between columns 1000 mm, ram size 800 x 1060 mm, bore in table 650 x 650 mm,capacity of die cushion 63 tons,travel of plate of cushion 125 mm, motor power 32 kW,dimensions: 6300 x 2520 x 2670 mm, weight 33.8 tons 1983 Good Condition Photo
272 MA22030 WMW Erfurt,Germany PKZZIV500.1FS Total capacity 500 t, Stroke 500 mm, Ram adjustment 500 mm, Shut height 1100 mm, Distance between columns 2800 mm, Table size 2800 x 1800 mm, Ram size 2800 x 1700 mm, Main motor 104 kW, Main voltage 380 V, Number of strokes 20 s.p.m., Height over floor approx. 7600 mm. Mechanical single action press 1988 Good working condition Photo
273 MA22026 Komatsu ODA50 500 tons, SPM:24-60, Slide:1850x900,Bolster:1850 x 1200,Stroke: 300 mm. Slide Adjust: 150mm, Die Height:700mm 1976 Good Condition Photo
274 MA22008 WMW Erfurt,Germany PKZV800 Capacity- 800 tons, Table dimensions (x-y)- 4000x2500 mm (Frontale moving table), Slide dimensions (x-y)- 4000x2500 mm, Stroke-500 mm, Light at TDC-2200 mm, Cushion details: Cushion capacity-160 ton, Cushion stroke-200 mm, Width-8400 mm 1971 Good working condition Photo
275 MA21969 Niagara SE4-1600-156-72 1600ton, Bed size:3900x1800, Stroke:600, Shut Height:1500 over bolster, Adjustment:350, SPM:10-35, Windoes,Sesco Feedline, Coil Weight Max:50,000, Coil width range:450 to 1500, Coil OD Range: 900 to 1800, Coil ID Range: 500 to 600, Material to be run : Steel at 60,000 PSI Yield Material thickness range: 0.030" to .125", Line speed max:100FPM, Passline:1200, Feed direction left to right. Very good condition Photo
276 MA21967 Clearing S4-1000-120-84 1000ton, Bed size:3000x2100mm, Stroke:300, Shut Height:1100,SPM:20-60 (Variable), Windows:2250 wide, 2 RollingBolsters (bi-directional)
May be inspected in plan
5 Available
1987 Very good condition Photo
277 MA21966 Clearing S4-1000-144-84 1000ton, Bed size:3600x2100, Stroke:700, Adjustment:300, SPM:20, WindowS: can be installed, Rolling Bolster, Hydraulic Overloads, Micro-Inching. Machine has rolling bolster but no cushions. Dismantled,Good condition Photo
278 MA21962 Verson S4-500-186-108 500ton, Bed:4650x2700, Stroke:300, Shut Height:1200 (SDAU), Adjustment:500, SPM: 15-30 (Variable), Windows:1800 wide, (2) rolling bolsters but no cushions, Updates controlsm Xycom PLC Controls. 1969 Disassembled Photo
279 MA21951 Shinohara SG350A 350tons, Stroke:280mm, SPM:30, Die Height:500mm, Adjust:120mm, Slide:960x840mm, Bolster:1100x1020mm, Motor:30kW4P, Cushion:40tons, Cushion Stroke:155mm, Cushion Pad:720x530mm Working Photo
280 MA21935 Komatsu E2P300K3 with Die Cushion 1979 Good Condition Photo
281 MA21926 Amada,Japan TP35 B:700x400mm S:80mm 120spm DH:220mm SL:350x300mm 1996 Good Condition Photo
282 MA21918 Russian K3035B 315 tons, table dimensions 2500 x 1250 mm, ram stroke 400 mm, 25 SPM, ram adjustment 250 mm, shut height 700 mm. 1982 Good Condition Photo
283 MA21906 Russian K3732 160tons, working area of table 2000 mm x 1250 mm,number of ram strokes (1/min) 45,30,22,output of main motor 23 kW, height of the machine 4490 mm, width of the machine 3125 mm, length of the machine 2035 mm, weight of the machine 30000 Kg 1974 Good Condition Photo
284 MA21904 Russian K3035 315 tons, ram stroke 400 mm, 25 SPM , shut height 750 mm, bed to ram adjustment stroke 250 mm, bed dimensions 2500 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 47 kW , overall dimensions 4555 x 2900 x 6850 mm, mass 50.9 tons. Working Photo
285 MA21897 Sumitomo,Japan FPA3000 3000ton, Stroke:360mm, SPM:60, Slide:1200x1100mm, Bed:1400x1500mm Good condition,under power Photo
286 MA21896 Komatsu E2P500 500ton, Stroke:500mm, Die Height:840mm, Adjust:400mm, SPM:15-20, Bolster:2500x1400mm, Slide:2500x1300mm, Motor:55kW, Good Condition Photo
287 MA21894 Russian K3535A 315 tons, ram stroke 400 mm, 25 SPM , shut height 750 mm, bed to ram adjustment stroke 250 mm, bed dimensions 2500 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 47 kW , overall dimensions 4555 x 2900 x 6850 mm, mass 50.9 tons. 1986 Good Condition Photo
288 MI5536 Zdas Capacity 350 ton,
Bed size: 800x800,
Shut height:450,
Stroke:300,
Ram Setting motorized,
New Siemens motor(2011),
New electrical panel (2011),
New lubrication Pump (2011),
Weight of the machine: approx 18mt.
good condition,reconditioned Photo
289 MA21866 Minster S1-500-42-54 Bed Size:1350x1050mm, SPM:20, Stroke:350, Slide:1350x1050, Shut Height:1075, Bolster Plate thick:175,Slide Adjustment :300 motorized
Air clutch & brake, Air counterbalances, Window in uprights
Good Condition Photo
290 MA21816 TMP Voronezh Russia KB3539 800 tons , table dimensions 2500 x 1600 mm, stroke 320 mm, 25SPM , shut height 650 mm, ram adjustment 320 mm, ram dimensions 1400 x 400 mm, tool cushion capacity 80 tons, cushion stroke 90 mm, upper ejector capacity 40 tons , main motor power 90 kW, dimensions 4200 x 4860 mm, height above floor level 6410 mm, weight 96 tons 1989 Good Condition Photo
291 MA21815 TMP Voronezh Russia KB3539 800 tons , table dimensions 2500 x 1600 mm, stroke 320 mm, 25SPM , shut height 650 mm, ram adjustment 320 mm, ram dimensions 1400 x 400 mm, tool cushion capacity 80 tons, cushion stroke 90 mm, upper ejector capacity 40 tons , main motor power 90 kW, dimensions 4200 x 4860 mm, height above floor level 6410 mm, weight 96 tons 1982 Good Condition Photo
292 MA21814 Ravne,Germany DE250-2500-1250 250 tons , 25 SPM, ram stroke 400 mm, adjustment stroke 250 mm, main motor 37kW, motor RPM 970/min , cushion in table 47 tons , stroke 155 mm, ram size 2500 x 1250 mm, table size 2500 x 1250 mm, distance between columns 2750 mm, height from floor 6700 mm, shut height 800 mm, press weight 50 tons - 2 nos. 1982 Good Condition Photo
293 MA21809 Russian LKT250 Table size:1600x1200,Slide:1560x900mm,Stroke:250mm,Weight:20 tons 1992 Under power Photo
294 MA21761 Russian KA3132A 160 tons, slide stroke 250mm, 40spm, shut height 610, bed to ram adjustement stroke 160 mm , ram axis to frame distance (overhang) 535 mm , distance clear between columns 1810 mm , bed dimensions 2000x750mm,ram dimensions 1500 x 630 mm , bolster plate thickness 100 mm , 22kW,dimensions 2940 x 2990 x 4750 mm , weight 26.2 tons 1986 Good Condition Photo
295 MA21754 TMP Voronezh Russia KB3537 500 tons, slide stroke 250mm, table dimensions 2500 x 1400mm, slide dimensions 2380 x 1200mm, overall dimensions 4350 x 2470 x 5660mm, height above floor 5660mm, press weight 66 tons. Press with pneumatic die cushions 1986 Complete ,good working condition Photo
296 MA21739 WMW Erfurt,Germany PEEII250 Rated deformation force 250 t, Length of working table area 1200 mm, Width of working table area 800 mm, Rated deformation force 250 t, Slide stroke 40-160 mm, Number of slide strokes 50 /min, Table dimensions 1250 x 800 mm Slide dimensions 670 x 900 mm, Slide adjustment 110 mm, Shutheight 500 mm, Main motor output 22 kW, Dimensions l x w x h 1445 x 2680 x 3275 mm, Machine weight 17500 kg. 1982 Good Condition Photo
297 MA21729 SAG350 350ton, Table:2800x1500, Slide Area:2800x1500mm, Stroke Length:400mm, Shut Height:700mm Adjustment of Slide:250mm, Main motor:60HP/4P, Stroke no/min: 40spm Good Condition Photo
298 MA21725 Chin Fong,Taiwan GLS320 320ton, Table area: 2500x900mm, Slide area:2500mmx900mm, Stroke length:250mm, Shut height:545mm, Adjustment of slide:45mm, Main motor:40HP/4P, Strokeno/in:4 Good Condition Photo
299 MA21719 WMW Erfurt,Germany PEEII250 Rated deformation force 250 t,
Length of working table area 1200 mm,
Width of working table area 800 mm,
Rated deformation force 250 t,
Slide stroke 40-160 mm,
Number of slide strokes 50 /min,
Table dimensions 1250 x 800 mm
Slide dimensions 670 x 900 mm,
Slide adjustment 110 mm,
Shutheight 500 mm,
Main motor output 22 kW,
Dimensions l x w x h 1445 x 2680 x 3275 mm,
Machine weight 17500 kg.
Good Condition Photo
300 MA21718 WMW Erfurt,Germany PEEII250 Rated deformation force 250 t,
Length of working table area 1200 mm,
Width of working table area 800 mm,
Rated deformation force 250 t,
Slide stroke 40-160 mm,
Number of slide strokes 50 /min,
Table dimensions 1250 x 800 mm,
Slide dimensions 670 x 900 mm,
Slide adjustment 110 mm,
Shutheight 500 mm,
Main motor output 22 kW,
Dimensions l x w x h ;1445 x 2680 x 3275 mm,
Machine weight 17500 kg.
Good Condition Photo
301 MA21634 WMW Erfurt,Germany PEEII250 Rated deformation force 250 t,
Length of working table area 1200 mm,
Width of working table area 800 mm,
Rated deformation force 250 t,
Slide stroke 40-160 mm,
Number of slide strokes 50/min,
Table dimensions 1250 x 800 mm,
Slide dimensions 670 x 900 mm,
Slide adjustment 110 mm,
Shutheight 500 mm,
Main motor output 22 kW,
Dimensions 1445 x 2680 x 3275 mm,
Machine weight 17500 kg.
good mechanical condition Photo
302 MA21602 WMW Erfurt,Germany PE2H315-2500/1450ES 315 tons , Table dimensions 2500 x 1450 mm Ram dimensions 2500 x 1450 mm Ram stroke 900 mm Max. Cushion force 110 tons , Main motor power 55KW, Supply voltage 380 V, Frequency 50 HZ, Compressed air 6 barr, Net weight aprox. 97 tons 1989 excellent working condition Photo
303 MA21552 Benelli P2MT1250-6 x 1 1250 tons, stroke 600 mm, max light die 1250 mm, 6-25 SPM, table 4200 x 2000 mm. 1978 Good Condition Photo
304 MA21549 Radaelli 300 tons , table dimensions 2000 x 1350 mm, slide dimensions 2000 x 1350 mm, 80 SPM, motor power 25 HP, fixed stroke 300 mm, light between columns 2020 mm, ram adjustment 200 mm, max. distance between table and slide 1400 mm, weight 510 q.li Good Condition Photo
305 MA21536 Spiertz 320ton, Table:2700x1400, Slide:2700x1400, Stroke:300mm, Strokes per minute:30, Light at tdc:1300mm, Lateral window:750mm, 1977 revised in 2005 Good Condition Photo
306 MA21534 Spiertz 400ton,Mechanical H-frame 2 conrods, Table : 2100x1400, Slide:2100x1400, Stroke:400mm, Strokes per minute: 10-50m Light at TDC:1300mm, Lateral window:700mm, Two independent cushions, 1971,Revised in 2005 Good Condition Photo
307 MA21514 Russian KB3537 500 tons, slide stroke 250mm, table dimensions 2500 x 1400mm, slide dimensions 2380 x 1200mm, overall dimensions 4350 x 2470 x 5660mm, height above floor 5660mm, press weight 59 tons 1986 Good Condition Photo
308 MA21512 Russian K3735A 315 tons, Table size:1250x2500mm, Shut height: 1000mm, Adjustment between table & ram:400mm, Stroke: 18/min,Ram stroke:500mm, 1974 Excellent Photo
309 MA21471 S2-600-120-60 600ton, Bed size:3000x1500, Shut height:1100, Adjustment:250mm, Stroke:400,

Equipped with Rolling Bolster
Updated Electrics and Controls
Presses Currently Disassembled Ready for Loading.
Good Condition Photo
310 MA21456 Russian KB3537 500 tons, slide stroke 250mm, table dimensions 2500 x 1400mm, slide dimensions 2380 x 1200mm, overall dimensions 4350 x 2470 x 5660mm, height above floor 5660mm, press weight 59 tons Working Photo
311 MA21413 Ando PLS2-350 Capacity : 350 tons,
Stroke : 450 mm,
Stroke per minute : 13,
Die height : 650 mm,
Adjust : 250 mm,
Bolster : 2200 x 1500 mm,
Slide : 2200 x 1500 mm,
Die cushion : 70 tons, 1 pad, 2 cylinder,
Pad size : 1800 x 900 mm,
Good Condition Photo
312 MA21362 Clearing F23000-252 Bed size:6300x1800mm, Stroke:400mm, Shut height:1437.5 (SDAU, over bed), Adjustment:300mm, Strokes per minute:12, Midwest hydraulic cluctch/brake, Window: up to 1000mm can be installed.
Trabon recirculating lubrication system, Hydraulic die clamps included,
May be seen under power in the plant.
Recently rebuilt Very good condition Photo
313 MA21350 TMP Voronezh Russia KB3038 630 tons, ram stroke 150 mm, 20 stroke per min., table size 5090 x 700 mm, shut height 660 mm, ram adjustment 200 mm, ram dimensions 5000 x 700 mm, cushion capacity 90 ton, cushion stroke 60 mm,height 5410 mm, main motor power 50 kw, dimensions: 5920 x 4000 mm, weight 112,5 tons, 1985 never used Photo
314 MA21302 WMW Erfurt,Germany PKZZ800/4000 800 tons, stroke size 500 mm, stroke per min. 14, bed: fixed, platen size 4000 x 2500 mm, length 4000 mm, slide area 3900 x 2500 mm, motor HP 90kW, 1475 rpm, dimensions: Height above floor: 8400 mm, L-R 6600 mm, F-B 3800 mm, weight 210 tons Good working condition Photo
315 MA21289 Amada,Japan TP-80C 80ton, 130st, 40-70spm, 320DH, Adust:80mm, B1000x600 1987 Good Condition Photo
316 MA21272 Cowlishaw Walker UF24E Capacity 400 t,
Number of strokes 10 s.p.m,
Ram adjustment 457 mm,
Stroke 609 mm,
Shut height 1244 mm,
Table surface 2743 x 1524 mm,
Ram surface 2743 x 1524 mm,
Cushion in bed 81 t,
Cushion stroke 457 mm,
T Slotted Bolster and Ram Face, 1 x Push Away Guard, 1 x
Rising Screen Guard. Qty : 2 Nos.
can be inspected under power Photo
317 MA21271 Wilkins & Mitchell S4-400-108-60 Capacity 400 t,
Number of strokes 16 s.p.m,
Ram adjustment 609 mm,
Stroke 406 mm,
Shut height 838 mm,
Table surface 2743 x 1524 mm,
Ram surface 2743 x 1524 mm,
Cushion in bed 80 t,
Cushion stroke 203 mm,
T Slotted Bolster and Ram Face, 1 x Push Away Guard, 1 x
Rising Screen Guard.
Qty : 2 Nos.
can be inspected under power Photo
318 MA21221 Nagao NCP110 110 tons , 150 Stroke, 40spm, 400 Die height, 100 adjustment, 1100 x 620 bolster, Shank hole area:90, Air press reqd:5, Main Motor: 7.5kw 1989 Good Condition Photo
319 MA21205 WMW Erfurt,Germany PKZZIV500/2800 500 tons,Table size 2800 x 1800 mm, shut height 1100 mm, slide 2800 x 1700 mm, slide stroke 500 mm, no. of strokes 16-20 per min., moveable table, window in a table 2400 x 1250 mm,cushion 100 tons, hydraulic overload protection-till 500 tons, weight 140 tons,with moving bolster and pneumatic cushion. 1975 Good Condition Photo
320 MA21184 Fukui MDE350 350ton, Stroke:500mm, SPM:15, Bolster:2800x1600mm, Slide:2800x1600mm, Adjust:500mm, Die height:1100mm,Die cushion:100ton, Cushion stroke:0-250mm, Pad:1150x2500mm Good Condition Photo
321 MA21183 Kawasaki Yuko DPD500 500ton,Bolster:3000x2000mm, Daylight:2000mm,Stroke:1500mm,Die cushion:15-150ton, Cushion stroke:300mm with moving bolster Good Condition Photo
322 MA21161 AIDA,Japan NC1-150 150ton, Slide stroke:130mm, Stroke/min :40-85spm, Die Height:350mm, Slide Adjustment:100mm, slide Area: (L.R.xF.B.):700x580mm, Bolster Area (L.R.xF.B.):1170x600mm, Main motor:11x4kw, Requirement Air pressure:5kgf/cm2, Power Supply:200V 50Hz, 1987 Good Condition Photo
323 MA21158 AIDA,Japan NC1-110(2) 110 ton, Slide stroke:180 mm, Strokes/min:35-65 spm, Die height:350 mm, Slide adjustment:90 mm, Slide area: (L.R.xF.B.):630x520 mm, Bolster Area:1070x680 mm, Main motor:7.5x4 kw, Required Air pressure:5 kgf/cm2, Power supply:200v 50Hz. Qty: 2 Nos. 1985 & 1989 Good Condition Photo
324 MA21153 WMW Erfurt,Germany PKZZI315FS 315 tons,
Ram stroke 400 mm, Adjustment of ram 400 mm, Max. shut height 750 mm, Distance between columns 2500 mm, Ram size(width x depth) 2450x1400 mm,
Table size(width x depth) 2500x1400 mm,
Bore in table 2300x1000 mm,
Main motor power 45 kW, No. of strokes/ min 18 ,
Capacity of die-cushion 63 tons,Travel of plate of cushion160 mm,
Approx.height over floor 6000 mm
1983 Good Condition Photo
325 MA21152 WMW Erfurt,Germany PE2U315FS Max. press capacity 125 mm, before NMT 3150 KW, Max. press capacity 160 mm before NMT 1100 kN, Power at main motor 45 kW, Main sizes: distance between side columns 2500 mm, Ram stroke 400 mm, Ram Adjustment 320 mm, Max. shut height of press 900 mm, Height of pull out table 500 mm, Surface of table press 2500 x 1450 mm, Surface of ram of press 2500 x 1450 mm, Dimensions of press above floor 7100 x 4400 x 2750 mm, dimensions of press below floor level 4000 x 4900 x 3000 mm - 2 machines 1988 Good Condition Photo
326 MA21150 WMW Erfurt,Germany PKZVI800FS 800 tons
Permissible rated force of slider (200 mm till BDC) 250 tons ,
Maximum rated force clamping (pressing) 160 tons,
No. of strokes per min 14 ,
Max weight of top plate 20 tons,
Distance between the column 4000 mm ,
Stroke of slider 500 mm ,
Adjustment of slider 500 mm ,
Shut Height 1700 mm max,
Max depth of drawing 200 mm ,
Size of bolster table 4000 x 2500 mm ,
Size of slider 3950 x 2500 mm ,
Size of opening in bolster 3520 x 1520 mm ,
Power of electric motor 90 kW ,
Die-cushion force 160 tons,
Die-cushion Stroke 200 mm ,
Height 8400 mm ,
Length 6600 mm ,
Width 3800 mm - 2 machines
1985 Good Condition Photo
327 MA21149 WMW Erfurt,Germany PE4HH800FS 800 tons,
Ram stroke 800 mm, Bolser plate- to-ram adjustment Stroke 500 mm, (Max) Shut height for bolser plate-to-holding-down ram 1400 mm, (Max) Shut height for bolser plate-to-holding-down ram 900 mm, Bed dimensions 4600 x 2200 mm,
Ram dimensions 4600 x 2200 mm,
Bed embrasure (hole) dimensions 3720 x 1620 mm,
Ram quick mounting Plate dimensions 4600 x 2200 mm,
Main drive motor power Max. 155 kW,
Idle running number (stroke) 8...18 ,
Number of die cushions 2 ,
Force of bed retaining 160 tons,Bed's Plate stroke 250 mm
- 2 machines
1990 Good Condition Photo
328 MA21148 WMW Erfurt,Germany PE4HH800ES 800 tons,
Ram stroke 800 mm, Bolser plate- to-ram adjustment Stroke 500 mm, (Max) Shut height for bolser plate-to-holding-down ram 1400 mm, (Max) Shut height for bolser plate-to-holding-down ram 900 mm, Bed dimensions 4600 x 2200 mm,
Ram dimensions 4600 x 2200 mm,
Bed embrasure (hole) dimensions 3720 x 1620 mm,
Ram quick mounting Plate dimensions 4600 x 2200 mm,
Main drive motor power Max. 155 kW,
Idle running number (stroke) 8...18 ,
Number of die cushions 2 ,
Force of bed retaining 160 tons,Bed's Plate stroke 250 mm- 2 machines
1990 Good Condition Photo
329 MA21141 Komatsu E2F400x250MF 400ton, Stroke:650mm, Adjust:400mm, SPM:12-18,Bolster:2150x1500mm,Shut Height:1890mm, Die Height:1300mm, with moving loader 1967 Good Condition Photo
330 MA21140 Komatsu E2S300 300ton,Stroke:500mm, Adjust:400mm, bolster:2150x1500mm, Shut Height:1000mm, Die cushion:1--ton(1 pad, 2 cylinder), Cushion stroke:250mm, Cushion adjust:200mm, Cushion pad:1840x880mm with moving loader,Qty:3 nos 1960 Good Condition Photo
331 MA21132 AIDA,Japan NCI1100 110Ton, Stroke:70mm, Spm:65-135, Die height:320mm,Bolster size: Lxwxh:1270x1920x299, Weight:11,000kg 2002 Good Condition Photo
332 MA21120 TMP Voronezh Russia K3044B 2500 tons, slide stroke 600 mm, ram strokes 11 continous/min, (can increase upto 16 in automatic), distance table and slide , when stroke down 1350 mm(can be increased for 500mmdue to length of tie bar), slide adjustability 500 mm, table area from 3960 x 2000 mm, slide area 4250 x 1800mm, bolster thickness 350mm, number of cushions in table 3, cushion travel in table 270mm, cushion effort and cushion ejection at P=5,2kg/cm2 100 tons, distance between columns 4300 mm, force of slide ejector 400kN, travel of slide ejector 150mm, mod of main motor AK-104-6M, main motor power 200kW, revolutions per min 975 RPM, overall dimensions 5685 x 8232 mm, height above floor level 9485 mm, general weight 437117 kgs 1981 Good Condition Photo
333 MA21118 Kawasaki Yuko DPS-6200A 600Ton, Stroke:1300mm, Daylight:2000mm, Bolster:2500x1500mm, Travel:250mm/sec,Die cushion:100ton(50 tonx2)1 pad,DC Stroke:250mm 1963 Good Condition Photo
334 MA21080 Danly S2-400-96-48 400Ton, Stroke:200mm,Bed Size:1500mmx 2400mm, Shut Height:1975 & 1250, Adjustment:250,Speeds variable:12 to 75spm, Windows:1650mm wide, Bed Bolster: 225mm, T-slotted, RAM Bolster: 175mm T-slotted, Spare Bolster:225mm, Bolster Risers:900mm, T-slotted RAM, Air clutch & Brake, Air Counterbalance, Surge Tank, Put mounted, Verson Press Controls 1983 Good Condition Photo
335 MA21021 Manzoni Capacity 12500 Kn,
Rods number 4,
Tickness work 8 mm,
Numbers of strokes 20-60,
Slide stroke fixed 160 mm,
Slide adjustment motorized 100 mm,
Distance between table-slide 800 mm,
Dimensions table of press 2400x2200 mm,
Dimensions table slide 2250x2200 mm,
Light between tray 2250 mm,
Light between front assemble 2500 mm,
Light between lateral assemble 1350 mm,
Motor power 134 kw,
Weight 165000 kg.
With moving bolster and die cushion.
Good Condition Photo
336 MA20982 Fukui MDE-400 450ton, Stroke:450mm,SPM:15, Bolster:2500x1500mm, Die Height:1200mm, Adjust:400mm Motor:37kW 1972 Good Condition Photo
337 MA20971 Tong Myung MDC-E200 200Ton,Stroke:300, Table::1200x2000mm, weight:33ton, 1994 Good Condition Photo
338 MA20969 TMP Voronezh Russia K3535A 315 tons, ram stroke 400 mm, 25 SPM, shut height 750 mm, bed to ram adjustment stroke 250 mm, bed dimensions 2500 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 180 mm, main drive motor power 47 kW, overall dimensions 4555 x 2900 x 6850 mm, mass 50.9 tons. Qty 2 nos. 1982 Good Condition Photo
339 MA20968 TMP Voronezh Russia KA3534 250 tons, ram stroke 400 mm, no. of ram stroke 25 per min., shut height 750 mm, bed to ram adjustment stroke 250 mm, bed dimensions 2500 x 1250 mm, ram dimensions 1000 x 1000 mm, bolster plate thickness 160 mm, main drive motor power 40 kW, overall dimensions: 4555 x 2900 x 6850 mm, weight 52 tons.No moving table. Manual available. Qty : 2 nos. 1982 Good working condition Photo
340 MA20943 AIDA,Japan PDM30 300Ton, Stroke:450mm, SPM:14, Die Height:675, Adjust:200, Bolster:2130x1370, Motor:37kW, Die Cushion:50tons Good Condition Photo
341 MA20856 Komatsu 600Ton, Stroke:600mm, Die height:1400mm, Bolster:3000x2200, adjust:700mm, SPM:13-20, Die cushion:1 pad 2 cylinder, Capacity:200ton, stroke: 250mm, Pad size:2500x1550mm Good Condition Photo
342 MA20855 Komatsu 400Ton,Bolster:2700x1900, Die height:1300, shut height:1920, adjust:650, SPM:13-20, Die cushion:1 pad 2 cylinder, capacityL50ton x2 =100ton, stroke:250mm, pad size:2200x1300mm ,Qty:11 nos 1971-1975 Good Condition Photo
343 MA20794 Benelli power:120Ton, Stroke:250mm,Plate:800x1300mm, Machine number-35B Good Condition Photo
344 MA20793 Benelli Power:200Ton, Stroke:200mm, Plate:1800x1000mm, DimensionL3200x1700x5000mm, Machine number:180 Good Condition Photo
345 MA20784 WMW Erfurt,Germany PKZZ800/4000 800 tons, stroke size 500 mm, stroke per min. 14, bed: fixed, platen size 4000 x 1800 mm, length 4000 mm, slide area 3900 x 2500 mm, motor HP 90kW, 1475 rpm, dimensions: Height above floor: 8400 mm, L-R 6600 mm, F-B 3800 mm, Weight 154 tons. Qty : 2 Nos. 1963 & 1964 Good Condition Photo
346 MA20728 AIDA,Japan 60 tons. Multipositioning- 2 nos 1978 Good Condition Photo
347 MA20665 Seyi Amino/Sutherland SDP220 220 tons ,
Stroke 787.5 mm,
Daylight 1180 mm,
bed and slide area 1967.5 x 1377.5 mm,
440v/60hz,
flush floor design,

equipped with:
75 HP motor,
operator control console,
CNC control with CRT screen,
top mounted hydraulics,
light barrier front & back,
no cushion,

refurbished in 2005
main cylinders
hydraulic circuit
hydraulic valve


approx weight 100,000 lbs
approx dimensions 3025 x 1750 x 5625 mm.
1995 rec 2005 Reconditioned Photo
348 MA20632 WMW Erfurt,Germany PKZZ315 Table dimensions (x - y)2500 x 1250 mm,
Slide dimensions (x - y)2500 x 1250 mm,
Conrods 2,
Stroke 400 mm,
Light at tdc* 1100 mm,
Stroke/min : regolabile da 10 a 40,
Slide adjustment 200 mm,
Lateral window 1600 mm,
Number of guide 4,
Blank holder,
Number 2,
Power 63 Ton,
Stroke 160 mm,
Motors :
Safety system: HYDRAULIC,
Weight 76 Ton,
Front 200 mm,
Deep 2200 mm,
Height 7100 mm,
Accessories: with lateral moving bloster
Machine condtion revised under ue law.
Good Condition Photo
349 MA20620 Radaelli Capacity:200Ton, Table Dimensions:1400x900mm, Slide dimensions:1200x850mm, Storke:200mm, Weight:15ton, Speed strokes/min:44 Good Condition Photo
350 MA20530 Verson S4-400-96-60T 400 tons, stroke 200 mm, bed size 1500 x 2400 mm, shut height 1975 x 1250 mm, adjustment 250 mm, speeds variable 12 to 75 SPM , windows 1650 mm, bed bolster 225 mm T Slotted , ram bolster 175 mm T Slotted , spare bolster 225 mm, bolster risers 900 mm, T Slotted ram , Air clutch and brake , air counterbalance, surge tank, pit mounted , Verson Press controls. 1983 Good Condition Photo
351 MA20529 Warco 130-2-120EDC 130 tons , stroke 200 mm, shut height 500 mm, bed area 3000 x 675 mm, ram area 3000 x 675 mm, 35 SPM, equipped with:
motor & controls
air clutch & brake
motorized ram adjustment
t-slotted ram & bolster plates
500 mm windows
Very good condition Photo
352 MA20488 Danly SS4-400-124-84 bed 2100 x 3100 mm, stroke 400 mm, shut 312.5 - 906.25 mm, adjustment 600 mm, 9-40SPM , windows 1850 x 950 mm, bolster 200 mm, no cushion, Feed Strilich, Feed Description..50,000# Coil, 6 - 72" Coil Width, 9-Roll B.V., 3-1/2 Rolls 1952 Very good condition Photo
353 MA20406 WMW Erfurt,Germany PKZV800FS 800 tons , table size 4000 x 2500 mm, ram size 3950 x 2500 mm, moving bolster, ram stroke 500 mm , Tool assembly dimensions : tool assembly height 1700 mm , distance between columns 4000 mm , electrical specs: total power consumption 100 kW , mains voltage 380V , mains frequency 50 HZ , dimensions 8600x3500x8800 mm (height under floor level 5000 mm), press has 160 ton die cushion & stroke is 200 mm , Front moving bed - 3 machines Very good condition Photo
354 MA20388 Grimar Capacity 125Tn,
Table size 1210 x 825 mm,
Strokes per minute 400,
Variable travel 400 mm,
Motor power 40 HP,
Machine dimensions 2800 x 1300 x 4000 mm,
Weight 17000Kg.
Equipment :
Planner, winder and feeder machines,
Coil dimensions 1200Kg,
Interior Dia. 500 mm.
Exterior Dia. 1500 mm.
Good Condition Photo
355 MA20387 Schuler German Capacity 150Tn.
Distance between columns 1200 mm,
Table size 1150 x 1000 mm,
Hammer dimensions 1.000x850 mm,
Strokes per minute 100-400.
Variable travel 315-375,
Machine dimensions 3000 x 1530 x 4150 mm,
Weight 26000 Kg.
Equipment :
Winder with 2 heads, planner and feeder.
Width 250mm.
Distance between side 350 mm,
Coil dimensions: interior min/max interior diameter 340/520 mm,
exterior diameter until 1150 mm.
Good Condition Photo
356 MA20386 WMW Erfurt,Germany Neumatic clutch.
Capacity 160Tn.,
Table dimensions 1000 x 700 mm,
Maximum height under the bed 600 mm,
Distance from the center of the table to the bed 450 mm,
Variable travel 32 to 140 mm,
Spindle regulation 100 mm,
Upper table dimensions 850 x 630 mm,
Supplementary table 1000 x 800 mm,
Central holl in the supplementary table 310mm,
Motorizad spindle,
Sensitive automatic display of strokes,
Motor power 17 HP.,
Voltage 380 V 50 Hz.,
Machine dimensions 2300 x 1100 x3300 mm,
Electric board dimensions 1100 x 800 x 2000 mm.
Aproximate weight 7000Kg.
Good Condition Photo
357 MA20344 WMW Erfurt,Germany PKZZIII315.1FS Max. force of ram 3150 kN,
Ram stroke 400 mm,
Adjustment of ram 400 mm,
Max. Shut height 900 mm,
Distance between columns 2500 mm,
Ram size (widthxdepth)2500x1400 mm,
Table size (widthxdepth)2500x1400 mm,
Bore in table 2100x1000 mm,
Main motor power 55 kW,
No. of strokes/mi 25,
Capacity of die-cushion 630 kN,
Travel of plae of cushion 160 mm,
Approx. height over floor 6350 mm.
Good working condition Photo
358 MA20238 Russian KB2132 160 tons , Slide stroke 25- 160 mm , № of strokes per minute 71 , Shut height on Bolster, "SDAU" 370 mm , Slide adjustment 120 mm , Bed & Bolster area left-right 1000 mm, front-back 670 mm, Bolster thickness 110 mm, Slide Area left-right 460 mmm front-back 580 mm, Motor 16 HP, Overall dimensions 2340 x 2100 x 3700 mm , Weight 13 tons. No motors, Reducing Gear, Not complete pneumatically, electrically, Qty: 3 Nos. 1989 Complete Photo
359 MA20174 WMW Erfurt,Germany PE2H500 Centres of pressure-2, Maximum force of slide- 5,000 kN, Stroke of slide-500 mm, Adjustability of slide-400 mm, Maximum daylight between bolster and slide (stroke down, adjustment up)-1,120 mm, Width between columns-2,800 mm, Slide area (width X depth-2,800X1,500 mm, Bed area (width X depth)-2,800X1,500 mm, Opening in bed (width X depth)-2,520X1,020 mm, Main motor power max.-134 kW,
Idle stroke rate-12,5. . .32, min-1, Counterpressure of cushion in bed-1,000 kN,Stroke of cushion plate-200 mm, Height above ground- approx.-8,200 mm
1986 Good working condition Photo
360 MA20089 WMW Erfurt,Germany PEEII250 Capacity 250 T, Table area 1250 x 850 mm, Ram area 900 x 670 mm, Stroke 40 to 160 mm, Ram adjustment 110 mm, Daylight 500 mm, Continous stroking rate 50 str./mn, Adjustment 110 mm, Dimensions: L/R 1445 mm, F/B 2680 mm, Height 3275 mm, Approx. Weight 18 T. 1975 Complete ,good working condition Photo
361 MA20076 Raskin 2013E2 Capacity: 200 to,
Stroke: 300 mm,
No. of strokes: 40,
Bed: 1320 x 900 mm,
Ram: 1200 x 900 mm,
Adjustment of ram: 250 mm,
Shutheight: 800 mm,
Cushion in bed: 20 to,
Stroke of cushion: 120 mm
1971 Good Condition Photo
362 MA20075 Bret PAFR25 Capacity: 250 to, Stroke: 300 mm,
Number of strokes: 30 - 60,
Bed: 1200 x 900 mm,
Ram: 1270 x 800 mm,
Adjustment of ram: 150 mm,
Shutheight: 505 mm,
Height over floor: 5700 mm,
With decoiler + feeding max. 800 x 3 mm,
Double decoiler 2 x 4 to
1971 Good Condition Photo
363 MA20074 Clearing S2-200-79 Slide capacity : 200 to,
Slide stroke : 194 mm,
Slide adjustment : 258 mm,
Number of strokes per minute : 40,
Table area : 2000 x 1200 mm,
Shut height stroke down,
adjustment up : 1032 mm,
Height over floor : ca. 4,5 m
Good Condition Photo
364 MA20072 Krupp PED1250 250 tons at 15 before dead point
Size of table : 1000 x 800 mm,
Size of ram : 1000 x 800 mm,
Stroke (fixed) : 250 mm,
Shut height : 750 mm,
Distance between uprights : 1180 mm,
Strokes per minute : 20,
Throat : 450 mm,
Adjustment of ram : 200 mm,
Ejector stroke : 75 mm,
Voltage : 550 V / 50 Hz,
Driving engine : 22 kW; 1500 rpm,
Air cushion : KPz 680 x 100,
Cylinder diam. : 680 mm,
Compressed air cushion,
capacity : 46 to
Stroke : 100 mm,
Number of stages : 2,
Air pressure : 6,65 at,
Total weight of the machine : 46 000 kg,
Height over floor : 5600 mm,
Width of the machine : 2700 mm,
Length of the machine : 2900 mm.
1965 Good Condition Photo
365 MA20071 Raskin Star2512SR Capacity 250 T.
Fixed stroke 180 mm
Shut height stroke down, adjustment in
with false table thickness 175 mm
625 mm
Variable stroking rate
35 to 70 str./mn
Motorised adjustment
100 mm
False table area
F/B 1100 mm
L/R 1220 mm
Hole in table
F/B 690 mm
L/R 890 mm
Blank holder 25 T. - stroke 100 mm
Hydraulic fuse on each rod
Bottom pneumatic cushion
Approx. weight of the press
35 T.
Remarks:
- two rods
- mecanichal hitch feeder, 0 to 330 step, max width of
strips 330 mm, thickness 3 mm
- Dimeco uncoiler, straightener, reel holder
- stock skeleton feeder
- scrap cutter
- sound proof cabin
Good Condition Photo
366 MA20070 Raskin 251BL Capacity 250 T, Stroke 400 mm,
Daylight 470 mm,
Stroking rate 22 cps/min
Motorised adjustment 150 mm
Table area 1130 x 1500 mm
Ram area 1000 x 1390 mm
Die cushion
Capacity: 48 T.
Stroke: 225 mm
Motor
Dimensions of the press:
2700 x 2000 mm
Height: 4000 mm
Weight of the press 40 T.
Remarks:
- 2 rods
- Lower cushion
Good Condition Photo
367 MA20069 Bret PA25-125 Capacity 250 T.
Fixed Stroke 200 mm
Daylight (stroke down, adjustment in) 450 mm
Table area 1200 x 1000 mm
Ram area 1200 x 800 mm
Lateral openings
L/R 350 mm
Height 400 mm
Dimensions of the machine:
L/R 3000 mm x F/B 1900 mm
Height 4500 mm
Weight of the machine ar. 20 T.
Remarks:
Several spare parts available
- Crankshaft
- Clutch
- Equalizing system
- 1 rod
Good Condition Photo
368 MA20052 Radaelli 200 Tons,
Conrods number 1 ,

Table dimensions (X - Y) 1400 x 900 mm ,
Slide dimensions (X - Y) 1200 x 850 mm ,
Stroke 200 mm ,
Light at TDC* 800 mm ,
Speed strokes/min 44 ,
Adjustment slide 100 mm ,
Cuscini Premilamiera
Number 1
Capacity 12 Ton ,
Stroke 120 mm ,
Motors
Number of motors 1 ,
Motors Power 12 HP ,

Weight 15 Ton ,
Front 1400 mm ,
Depth 2250 mm ,
Width 3900 mm .
Very good condition Photo
369 MA20051 Balconi 100 Tons,
Conrods number 1 ,

Table dimensions (X - Y) 1000 x 650 mm ,
Slide dimensions (X - Y) 550 x 400 mm ,
Stroke 20 - 180 mm ,
Light at TDC* 350 mm,
Speed strokes/min 57 ,
Adjustment slide 90 mm,
Motors
Number of motors 1 ,
Motors Power 10 HP ,

Front 1800 mm ,
Depth 2500 mm ,
Width 3500 mm ,
Accessories Model Mtrs/l ,
Very good condition Photo
370 MA20050 Kalinin 63 Tons,
Conrods number 1 ,

Table dimensions (X - Y) 800 x 560 mm ,
Slide dimensions (X - Y) 450 x 310 mm ,
Stroke 10 - 100 mm ,
Light at TDC* 440 mm ,
Speed strokes/min 45 ,
Adjustment slide 80 mm ,
Lateral windows 0 mm ,
Guides number 4 .

Front 1500 mm
Depth 1400 mm
Width 2800 mm
Very good condition Photo
371 MA20040 Kyokuyo 150 ton
Stroke 250 mm,
SPM 4 - 40,
Bed 1560 x 1000 mm,
Die Height 650 mm
,
Good Condition Photo
372 MA20039 Okamoto 150 tons,
Stroke 250 mm,
SPM 30,
Bed 1000 x 1000 mm,
Die Height 450 mm
,
Good Condition Photo
373 MA20034 Bret 2PAM25 Capacity : 250T,
Stroke 60 mm,
Daylight (stroke down, adjustment up) 290 mm,
Variable Stroke Rate until 200 Str./min,
Motorised adjusment 50 mm,
Table area 1200 x 600 mm,
Distance between uprights 1500 mm,
Side opening - Width 530 mm - Height 700 mm,
Dimensions : 1600 x 3000 x 4500 mm,
Weight : approx. 36 T.
Good Condition Photo
374 MA20033 WMW Erfurt,Germany PKZZ250 Capacity : 250T,
Stroke 315 mm,
Distance table/ram (stroke down, adjustment up) 555 mm,
Strroke Rate 18 Str./min,
Adjusment 180 mm,
Table area 800 x 1180 mm,
Ram area 620 x 1000 mm,
Distance between uprights 800 mm,
Lower cushion :
- capacity 31,5T.
- stroke 125 mm,
Main motor 32 kW,
Height over the floor 5550 mm,
Good Condition Photo
375 MA20032 Fagor PRC2-250-2100-900 nominal force 2 500 kn,
2 rods,
Variable stroke 30 to 200 mm,
Die height 600 with stroke 200,
motorized adjustment 150 mm,
Table 2100 x 900 mm,
Ram 2200 x 1100 mm,
Distance between uprights 2340 mm,
stroking rate 45 str. / min,
Hydraulic security,
Line with :
Normatic uncoiler :
- Max. width 500 mm
- rolls weight 3t.
- hydraulic arm presser
Good Condition Photo
376 MA20031 Bliss S1150 Capacity : 150T,
Stroke 400 mm,
Daylight 600 mm,
Strroke Rate 20 Str./min,
Motorised adjusment 250 mm,
Table area 880 x 850 mm,
False table - Thickness 95 mm,
Centralized lubricating with oil,
Dimensions : 2000 x 2700 x 4900 mm,
Weight : approx. 16 T.
With 1 rod, 2 shafting lines, 4 counter balances, and hydraulic chucking of the tie rods.
Good Condition Photo
377 MA20030 Bliss S1150 Capacity : 150T,
Stroke 200 mm,
Daylight 670 mm,
Strroke Rate 70 Str./min,
Motorised adjusment 200 mm,
Table area 840 x 890 mm,
Ram area 850 x 800 mm,
False table 540 x 840 mm,
Tickness 85 mm,
Distance between uprights 940 mm,
Positive ejection in the table - stroke 80 mm,
Side opening 560(L/R) x H. 470 mm,
Space under the table for a conveyor belt 810(L/R) x H. 445 mm,
Centralized lubricating with oil,
Main motor 18,5 kW,
Dimensions : 2800 x 1770 x 4800 mm,
Weight : approx. 16 T.
With 1 rod, balancing and pneumatic secure pin.
Good Condition Photo
378 MA20029 Bliss S1150 Capacity : 150T,
Stroke 300 mm,
Daylight 560 mm,
Strroke Rate 40 Str./min,
Ram adjusment 200 mm,
Table area 870 x 840 mm,
Ram area 780 x 840 mm,
Distance between uprights 940 mm,
Positive ejection in the table - stroke 160 mm,
Side opening 530 mm,
Main motor 25hp,
Dimensions : 1600 x 1495 x 4400 mm,
Weight : approx. 17 T.
With 1 rod and double back gear.
Good Condition Photo
379 MA20002 Komatsu E2G500 Capacity - 500 ton, Stroke - 500 mm, SPM - 15-25, Bed - 3000 x 1300 mm, Die Height - 1300 mm, With Die Cushion. Excellent Photo
380 MA19846 IWK PEKRD250 Capacity 250 T.
Stroking rate 50 str. / min,
Variable stroke 20 to 200 mm,
Daylight 380 mm,
Motorized adjustment 130 mm,
Table area 1250 x 800 mm,
Ram 1200 x 750 mm,
Depth of throat 425 mm,
Motor 22 kW,
Dimensions of the press:
Width 1760 mm,
Depth 2500 mm,
Height 3920 mm,
Weight 22 tons.
Good Condition Photo
381 MA19845 Cofmo K2234 Capacity 250 T.
Fixed stroke 200 mm,
Daylight 560 mm,
Stroking rate 35 str./min,
Adjustment 140 mm,
Table area 1120 x 750 mm,
Distance between uprights 500 mm,
Motor 20 kW,
Dimensions of the press :
Width 2255 mm,
Depth 2450 mm,
Height 3950 mm,
Weight 21 T.
Good Condition Photo
382 MA19844 WMW Erfurt,Germany PEE250 Capacity 250 T,
Table area 1250 x 850 mm,
Ram area 900 x 670 mm,
Stroke 40 to 160 mm,
Ram adjustment 110 mm,
Daylight 500 mm,
Continous stroking rate 50 str./mn,
Adjustment 110 mm,
Dimensions: L/R 1445 mm,
F/B 2680 mm,
Height 3275 mm,
Approx. Weight 18 T.
Good Condition Photo
383 MA19843 Bret PA20 Capacity 200 T.
Fixed stroke 250 mm,
Stroking rate 40 str./min,
Table area 800 x 1200 mm,
Distance between uprights 1440 mm,
Motorised adjustment of rod env. 30 mm,
Daylight 500 mm,
False table Thickness 95 mm,
Hydraulic overload each rod (new),
Automatic centralized lubricating (new),
Side openings 400 x 830 mm,
Weight of the machine ar. 16 T.,
Dimensions LR 2400xF/B 2000 mm,
Height 4300 mm (with air tank
Side way 400 x 800 mm,
False table (New).
Good Condition Photo
384 MA19842 Bret 2PAM16 Force (at 12 mm from LDC) 1600 KN
Double connecting rod
Table area 1000 x 850 mm,
Ram area 1000 x 850 mm,
Fixed stroke 120 mm,
Die height (stroke down, adjustment in) 590 mm,
Motorised adjustment 100 mm,
Variable stroking rate 50 to 120 str./min,
Low cushion 160 KN stroke 25 mm,
Motor 37 KW,
Weight 25 T.
Nota: line equipped with:
uncoiler Gaudias et Bergeron,
straightener maxi width 400 mm,
Mechanical feeder maxi thickness 3 mm,
Scrap-cutter.
Good Condition Photo
385 MA19814 TMP Voronezh Russia K4039A 800 tons, slide stroke 800mm, table dimensions 4200 x 2100mm, slide dimensions 4150 x 2050mm, overall dimensions 6990 x 3800 x 12830mm, height above floor 9020mm, press weight 257 tons, With Moving Bolster and Cushion - 3 presses. 2000 Good working condition Photo
386 MA19807 WMW Erfurt,Germany PKZVI1250FS 1250 tons , number of connecting points of ram 4 , drawing device capacity 350 tons , ram stroke 630 mm , ram adjustment 630 mm , 11 SPM , table area 4000 x 2500 mm , slide area 4000 x 2500 mm , distance between columns 4050 mm , shut height 1250 mm , opening in bed 3320 x 1540 mm , cushion capacity 250 tons , cushion stroke 0-250 mm , ejection force 40 tons , overload protection 40 tons , main drive 132 kW , height above floor 9700 mm , moving bolster, pneumatic cushion and overload protection. Good Condition Photo
387 MA19798 TMP Voronezh Russia K3539 800 tons , table dimensions 2500 x 1600 mm, stroke 320 mm, 25SPM , shut height 650 mm, ram adjustment 320 mm, ram dimensions 1400 x 400 mm, tool cushion capacity 80 tons, cushion stroke 90 mm, upper ejector capacity 40 tons , main motor power 90 kW, dimensions 4200 x 4860 mm, height above floor level 6410 mm, weight 96 tons 1968 Good Condition Photo
388 MA19771 Wilkins & Mitchell E72-4-16 Capacity - 250 Tons, Bed Area - 1800 x 1200, Slide Area - 1800 x 1100, Stroke - 400, Strokes per Min. 17, Shut Height Max. - 750, Shut Height min - 600, Shut height Adj. - 150, Cushions Fitted 2 off at 60 T total Capacity, Cushion Stroke - 200, Working Height (From floor to top of bolster) - 750 mm. Good Condition Photo
389 MA19752 Amada,Japan SW200 Capacity - 200 ton, Stroke - 200 mm, SPM - 30, Bed - 2100 x 1300 mm, Die Height - 525 mm. Good Condition Photo
390 MA19750 AIDA,Japan PDW200 Capacity - 200 ton, Stroke - 300 mm, SPM - 20, Bed - 2000 x 1220 mm, Die Height - 850 mm, Die Cushion - 25 ton x 2 = 50 ton. Good Condition Photo
391 MA19746 AIDA,Japan Capacity - 150 Tons, Bed - 1250 x 775 mm, Slide - 687 x 587 mm, Stroke - 195 mm, Shut Height - 392 mm, Adjustment - 100 mm, Strokes per minute - 15-45 (Variable). Under power Photo
392 MA19745 Bliss SC2-400-84-56 Capacity - 400 Tons, Bed - 2100 x 1400 mm, Stroke - 300 mm, Strokes per minute - 30, Shut Height - 650 (SDAU), Adjustment - 250 mm, Windows - 625 mm, Floor Standing, Nos 2 Very good condition Photo
393 MA19740 AIDA,Japan PS300(2) Capacity 300 ton,
Stroke 250 mm,
SPM 35,
Bed 900 x 1100 mm,
Die Height 860 mm,
Die Cushion 9 ton.
Good Condition Photo
394 MA19738 Fukui MDC200 Capacity 200 ton,
Stroke 250 mm,
SPM 10 - 25,
Bed 1520 x 1080 mm,
Die Height 510 mm,
With 20 ton Die Cushion.
Good Condition Photo
395 MA19735 AIDA,Japan PD25 Capacity : 250 ton,
Stroke :300 mm,
SPM :25,
Bed : 1500 x 1000 mm,
Die Height : 700 mm,
Die Cushion : 30 ton,
Stroke: 130 mm,
Pad : 1070 x 670 mm,
Roll Feeeder :
Stroke : 0-125 mm,
Thickness : 0.4-1.2 mm,
Width : 250 mm,
Good Condition Photo
396 MA19734 Endo DG2P200 Capacity : 200 ton,
Stroke : 400 mm,
SPM : 14,
Bed : 900 x 1050 mm,
With Die Cushion.
Good Condition Photo
397 MA19733 Innocenti S2-400.108-60 Capacity - 400 Ton, Conrods number 2, Table dimensions (X - Y) 2743 x 1524 mm, Slide dimensions (X - Y) 2743 x 1524 mm, Stroke - 610 mm, Light at TDC* 1728 mm, Speed strokes/min regolabile da 10 a 30, Adjustment slide - 305 mm, Lateral windows - 1500 mm, Cushion Capacity - 70 Ton, Cushion Stroke - 203 mm, Middle of 1970 Working Photo
398 MA19711 Radaelli Capacity 500 Ton,
Conrods number 2,
Table dimensions (X - Y) 1600 x 1400 mm,
Slide dimensions (X - Y) 1600 x 1400 mm,
Stroke 300 mm,
Light at TDC* 1200 mm,
Speed strokes/min 16,
Adjustment slide 160 mm,
Lateral windows 600 mm,
Cuscini Premilamiera,
Capacity 33 Ton,
Stroke 150 mm,
Motors Power 40 HP.
1977 Good Condition Photo
399 MA19710 Colombo Giovanni Capacity 160 Ton,
Conrods number 2,
Table dimensions (X - Y) 1600 x 800 mm,
Slide dimensions (X - Y) 1600 x 800 mm,
Stroke 250 mm,
Light at TDC* 1300 mm,
Speed strokes/min 40,
Adjustment slide 100 mm,
Lateral windows 0 mm,
Guides number 4,
Motors Power 20 HP,
Weight 20 Ton,
Front 2500 mm,
Depth 2000 mm,
Width 4000 mm,
1978 Good Condition Photo
400 MA19709 Omera Capacity 220 Ton,
Conrods number 2,
Table dimensions (X - Y) 1800 x 1000 mm,
Slide dimensions (X - Y) 1800 x 900 mm,
Stroke 250 mm,
Light at TDC* 800 mm,
Speed strokes/min regolabile da 20 a 40,
Adjustment slide 100 mm,
Lateral windows 480 mm,
Guides number 8,
Cuscini Premilamiera
Number 2,
Capacity 20 Ton,
Stroke 110 mm,
Motors Power 35 HP,
Weight 20 Ton,
Front 2700 mm,
Depth 2000 mm,
Width 4500 mm,
1977 Good working condition Photo
401 MA19708 Spiertz Capacity 160 Ton,
Conrods number 2,
Table dimensions (X - Y) 1600 x 800 mm,
Slide dimensions (X - Y) 1600 x 800 mm,
Stroke 250 mm,
Light at TDC* 1300 mm,
Speed strokes/min 40,
Adjustment slide 100 mm,
Lateral windows 0 mm,
Guides number 4,
Motors Power 20 HP,
Weight 20 Ton,
Front 2500 mm,
Depth 2000 mm,
Width 4000 mm,
1979 Good working condition Photo
402 MA19705 TMP Voronezh Russia K665 800 tons.table size 2000 x 4200 mm, plate thickness 250 mm, ram stroke 600 mm, 12 SPM , shut height 1500 mm, dimensions 6082 x 3135 x 8900 mm, weight 203 tons. 1969 Very good condition Photo
403 MA19702 Russian K664 Capacity : 500 tons,
Ram stroke 630 mm,
No. of ram stroke per minute 18,
Shut height 1230 mm,
Bolster plate to ram adjustment stroke 600 mm,
Bed dimensions 3200 x 1700 mm,
Ram dimensions 3200 x 1700 mm,
Bolster plate thickness 220 mm,
Main drive motor power 100 kW,
Overall dimensions :
Floor space 6305 x 4200 mm,
Height above floor level 8930 mm,
Mass approx. 185T.
Very good condition Photo
404 MA19675 WMW Erfurt,Germany PKZZIV500/2800 500 tons,Table size 2800 x 1800 mm, shut height 1100 mm, slide 2800 x 1700 mm, slide stroke 500 mm, no. of strokes 16-20 per min., moveable table, window in a table 2400 x 1250 mm,cushion 100 tons, hydraulic overload protection-till 500 tons, weight 140 tons, Good working condition Photo
405 MA19654 WMW Erfurt,Germany PKZVI800/4000FS 800 Tons, Conrods number 4 , Table dimensions (X - Y) 4000 x 2500 mm , Slide dimensions (X - Y) 3950 x 2500 mm , Stroke 500 mm , Light at TDC* 1900 mm , Speed strokes/min 14 , Adjustment slide 500 mm , Lateral windows 0 mm , Cushion Premilamiera Capacity 160 Ton Stroke 200 mm , Width 8400 mm , Accessories FRONTAL MOVING BLOSTER 1983 Dismantled Photo
406 MA19614 WMW Erfurt,Germany PKZZ500/2800 500 Tons, Bed Size 2800 x 1400 mm 1975 Good Condition Photo
407 MA19613 Smeral,Czech LE400 400 tons. 1975 Very good condition Photo
408 MA19533 WMW Erfurt,Germany PKZZ250/2500 250 tons, ram stroke 400 mm, no. of strokes 25/min., ram adjustment 120 mm, shut height 720 mm, bed 2500 x 1400 mm, windows in bed 2300 x 850 mm, ram 2320 x 1250 mm, main drive motor 32 kW, 1977 Good Condition Photo
409 MA19529 WMW Erfurt,Germany PKZVIV500.1 500 tons,
Table size 2800x1800 mm,
Max. drawing depth 200 mm,
Ram stroke 500 mm,
Ram adjustment 500 mm- 2 machines and with moving bolster
1977 Very good condition,Under power Photo
410 MA19527 Shimomura DCLP350-20 Capacity - 350 ton, Stroke - 450 mm, SPM - 16 spm, Bolster - 2000 x 1500, Die Height - 800, Die Cushion - 40 ton x 2 = 80 ton, Stroke - 225 mm, Pad Size - 800 x 900 x 2 1988 Excellent Photo
411 MA19514 WMW Erfurt,Germany PKZZ800/4000 800 tons, ram stroke 500 mm, no. of strokes 14/min., ram adjustment 170 mm, shut height 1100 mm, bed 4000 x 1800 mm, windows in bed 3750 x 1120 mm, ram 3780 x 1500 mm, distance between columns 4000mm,main motor 55 kW, weight of press 154 tons, Dimensions: 6000x3000x8000. - 2 machines (One press main tie rod missing), no moving bolster 1967-69 Dismantled Photo
412 MI5257 Minster P150-28 Capacity: 150Ton,
W/Air Clutch,
4 Stroke,
4 Slide Adjustment,
1016mm x 712mm (Approx.) Bed,
3 Bolster,
508mm x 305mm Window,
Palm Buttons,
Good Condition Photo
413 MI5256 Cleveland,Ohio 11F110T Capacity: 110 Tons,
Shut Height W/444 mm,
Slide Adjustment 88 mm,
Stroke Per minute 36 SPM,
Bed Size 711 x 610 mm,
Good Condition Photo
414 MA19487 TMP Voronezh Russia KB3539 800 tons , table dimensions 2500 x 1600 mm, stroke 320 mm, 25SPM , shut height 650 mm, ram adjustment 320 mm, ram dimensions 1400 x 400 mm, tool cushion capacity 80 tons, cushion stroke 90 mm, upper ejector capacity 40 tons , main motor power 90 kW, dimensions 4200 x 4860 mm, height above floor level 6410 mm, weight 96 tons 1985 Very good condition Photo
415 MA19354 Bliss SE4-800-120-72 800 tons , Bed 3000 x 1800 mm, Stroke 500 mm, Shut Height 875 mm,
Adjustment 250 mm, Strokes per minute 15,
Windows 1400 mm, Updated Electrics & Controls
Very good condition,Under power Photo
416 MA19236 Ravne,Germany 250 tons , table 2500 x 1250 mm Very good condition Photo
417 MA19227 Russian Capacity : 175 tons,
Table : 3000 x 500 mm,
1992 Good Condition Photo
418 MA19151 Niagara IB90-6-8 Tonnage Capacity - At Mid Stroke 90 Tons,
- Near Bottom 135 Tons,
Overall Length of Bed and Ram: 3353 mm,
Distance Between Housings 1956 mm,
Stroke 76 mm,
Ram Adjustment (Powered) 127 mm,
Shut Height to Bed (SDAU): 305 mm,
Depth of Throat 203 mm,
Width of Bed152 mm,
Distance Floor to Top of Bed 889 mm,
Speed 36 SPM
Motor: 7.5 HP 3/60
Overall Dimensions (Approx.):. 3556 x 1626 x 3048 mm,
Weight (Est ) 16,000 lbs.
Equipped With:
Mechanical Clutch and Brake/ Full-Length Foot Treadle w/ Foot Pedal Operation ,
(4) 24" Sectional Ram Clamps/ 4" High Lower Die Rail (10'' Long) ,
Hurco "AutoBend 5" CNC Back Gauge,
Motorized Ram Adjustment,
Lubrication System,
36" Horn on Left Side of Bed and Ram.
Good Condition Photo
419 MA19103 WMW Erfurt,Germany PEDN100 pressure - 1000 kN, Table 900 x 700 mm, Daylight - 435 mm, Strokes -112 per minute, Stroke 16 - 70 mm. 1980 Good Condition Photo
420 MA19088 Clearing 300 tons , 14-21 SPM , main motor power 45 kW , light between tables 734 mm, table 2150 x 1270 mm, ram 2130 x 1270 mm, ram 355 mm, ram stroke 203 mm, tables height from fround level 900 mm, max height from ground level 7900 mm, pits 1400 mm, weight 46 tons , dimensions 3600 x 1600 x 9300 mm. Good Condition Photo
421 MA19087 Spiertz 250 tons , 14-21 SPM , main motor power 45 kW, light between tables 725 mm, table 2750 x 1380 mm, ram 2580 x 1170 mm, ram stroke 355mm, ram adjustment 203 mm, tables height from ground level 800 mm, tables height from ground level 8300 mm, max height from ground level 1400 mm, weight 45 tons , dimensions 3400 x 2200 x 9700 mm. Good Condition Photo
422 MA19085 Yosino DA200 Capacity - 200 Ton, Stroke length - 270mm, Max Daylight - 820mm, Table size - 1500 x 1100mm, Top table - 1400 x 620mm. Excellent Photo
423 MA19084 Komatsu OEW-150-2 Capacity - 150 Ton, Stroke length - 200mm, Max Daylight - 640mm, Bolster - 2000 x 760mm, Slide - 1600 x 550mm, SPM - 35~65. 1988 Excellent Photo
424 MA19083 Komatsu OBS200-3 Capacity - 200 Ton, Stroke length - 250mm, Max Daylight - 480mm, Bolster - 1450 x 890mm, Slide - 850 x 650mm, SPM - 25~50, 1989 Excellent Photo
425 MA19063 Weingarten VK800 Capacity - 800 Ton, Table surface - 3900 x 2000 mm, Ram surface - 3900 x 2000 mm, Stroke - 604 mm, Ram adjustment - 400 mm, Number of strokes - 16 s.p.m, Shut height (S.D.A.U.) 1550 mm, Cushion in bed - 160 ton, Cushion stroke - 209 mm, Ejector in ram - 60 ton, Ejector stroke - 150 mm, Weight ca. 180 ton. 1967/1994 Excellent condition,under power Photo
426 MA18986 WMW Erfurt,Germany PKZZ315/2500 Nominal press force: 315 tons, Working path of ram bottom dead center: 20 mm, Ram stroke: 400 mm, Ram adjustibility: 130 mm, Max drawing depth: 160 mm, Number of strokes ram per minute: 12, Dimensions of table: 2 500 x 1 400 mm, Dimensions of ram: 2 320 x 1 250 mm, Holder force: 63 ton, Ejector force: 10 ton. Rebuilt in 1998 Good condition,under power Photo
427 MA18905 WMW Erfurt,Germany PKZZ250FS Capacity : 250 tons, Centres of pressure 2, Maximum force of slide - 250 tons, Stroke of slide- 400 mm, Adjustability of slide- 250 mm, Max. daylight between bolster and slide, SDAU- mm 800, Width between columns - 2500mm, Slide area (W x D)-2500x1250 mm, Bed area (W x D)- 2500x1250 mm (moving bed), Opening in bed (W x D) - 2100x850 mm, Main motor power- 45 kW, Idle stroke rate- 25 per min, Counterpressure of cushion in bed - 50 ton, Stroke of cushion plate -160 mm, Height above ground- 6250 mm. 1989 Good Condition Photo
428 MA18885 LVD SE2-300 300 ton, Stroke - 0-400 mm, Distance between columns - 1600 mm, No. of strokes - 24 Hub/min., Table surface area - 1600x800 mm, Daylight - 500 mm, Total power requirement - 55 kW, Weight approx. - 52000 kg, Dimension of the machine l/w/h - 2.5 x 4.5 x 7,0 m. 1974 Good Condition Photo
429 MA18884 Schuler German E2-300 pressure - 300 ton, stroke - 450 mm, Distance between columns - 2450 mm, No. of strokes - 18 Hub/min., Table surface area 2400x1500 mm
daylight 800 mm, Total power requirement - 46 kW, Weight approx. 32000 kg, Dimension of the machine l/w/h - 2x4x8 m.
1968 Good Condition Photo
430 MA18875 Shinohara SS200 Capacity 200 tons,
Stroke 150 mm,
SPM 25,
Die Height 450 mm,
Adjust 100 mm,
Bolster 1100 x 1000 mm,
Side Opening 600 x 450 mm,
Good Condition Photo
431 MA18874 AIDA,Japan PDA20H Capacity 200 tons,
Stroke 200 mm,
SPM 20 -80,
Die Height 650 mm,
Adjust 100 mm,
Bolster 1500 x 1100 mm,
Good Condition Photo
432 MA18853 Chin Fong,Taiwan S2-400 Capacity : 400 ton, Table Size: 3700 mm x 1400 mm, Good Condition Photo
433 MA18803 WMW Erfurt,Germany PKZZI500 500 tons,slide stroke 500 mm, slide adjustment 500 mm, shut height 920 mm, bed area 2800 x 1500 mm, slide area 2750 x 1500 mm,capacity on ram 200 mm till lower dead point 160 tons , opening in the bed 2600 x 1060 mm, main motor power 55 kW, cushion capacity in the bolster 100 ton, cushion stroke 200 mm, height above floor level 7200 mm. Good Condition Photo
434 MA18780 TMP Voronezh Russia 800 tons, slide stroke 800mm, table dimensions 4200 x 2100mm, slide dimensions 4150 x 2050mm, overall dimensions 6990 x 3800 x 12830mm, height above floor 9020mm, press weight 257 tons. With Front Moving Bolster & Die Cushion 1973 Good working condition Photo
435 MA18626 WMW Erfurt,Germany PKZVIV500.1TS 500 tons , centres of pressure 4, slide stroke 500 mm , alide adjustment 500 mm , max dalylight between bolster and slide SDAU 1000 mm , width between columns 2800 mm , slide area 2800 x 1800 mm , bed area 2800 x 1800 mm , opening in bed 2400 x 1250 mm , main motor power 75 kW, idle stroke 20/min , counterpressure of cusjion in bed 100 tons , stroke of cushion plate 200 mm , height above ground 7350 mm , weight 156 tons. Good Condition Photo
436 MA18533 Sato DC300 300 tons , stroke 450 mm,18 SPM , adjustment 200 mm, DH 860 mm, slide 2130 x 1370 mm 1976 Good Condition Photo
437 MA18532 Ando 200 tons 1967 Good Condition Photo
438 MA18531 Ando PLS2-252 250 tons 1966 Good Condition Photo
439 MA18530 AIDA,Japan PL2-50 500 tons , stroke 500 mm,15 SPM , adjustment 300 mm, DH 900 mm, slide 2500 x 1520 mm 1965 Good Condition Photo
440 MA18529 AIDA,Japan FTN30G 300 tons , stroke 350 mm,20 - 35 SPM , adjustment 100 mm, DH 700 mm, slide 3000 x 1000 mm 1975 Good Condition Photo
441 MA18528 AIDA,Japan PDW20 200 tons , stroke 300 mm,20 SPM , adjustment 850 mm, DH 430 mm, slide 1830 x 1000 mm 1982 Good Condition Photo
442 MA18527 AIDA,Japan PBW15 150 tons , stroke 200 mm,30 SPM , adjustment 150 mm, DH 500 mm, slide 2000 x 1200 mm 1969 Good Condition Photo
443 MA18525 AIDA,Japan PBW15 150 tons , stroke 200 mm,30 SPM , adjustment 150 mm, DH 500 mm, slide 2000 x 1200 mm 1969 Good Condition Photo
444 MA18524 Fukui MDC150 150 tons , stroke 400 mm,20 SPM , adjustment 250 mm, DH 700 mm, slide 1100 x 1300 mm 1975 Good Condition Photo
445 MA18523 Fukui MDCE300 300 tons , stroke 450 mm,10-20 SPM , adjustment 300 mm, DH 650 mm, slide 2000 x 1350 mm
Bolster:2130x1350mm,
Main motor:22Kw,
Die cushion:25tonx2=50
1981 Good Condition Photo
446 MA18522 Ando 350 tons , stroke 550 mm,adjustment 230 mm, slide 2200 x 1500 mm 1968 Good Condition Photo
447 MA18452 TMP Voronezh Russia K4040 Capacity :
800 Tons,

Conrods number
4,

Table dimensions (X - Y)
4200 x 2240 mm,

Slide dimensions (X - Y)
4200 x 2240 mm,

Stroke
800 mm,

Light at TDC*
1950 mm,

Speed strokes/min
20,

Adjustment slide
500 mm,

Lateral windows
2300 mm,

Guides number
8
,
Blank Holder

Kind of blank holder
Pneumatic

Capacity
160 Ton,

Stroke
400 mm
,
Motors

Kind of safety
Hydraulic overload

Weight
220 Ton,

Accessories

Two Lateral moving bloster + manipulator robot island
1998 Good Condition Photo
448 MA18449 British Clearing B2-400-84-48 400 tons.
table 2150 x 1250 mm.
ram surface 2150 x 1250 mm.
strokes per minute 15
ram travel 300 mm.
Good Condition Photo
449 MA18365 Komatsu L1B200L 200 tons , Rating position above bottom dead center 13mm

Slide stroke 250mm

No of strokes (continuous) 25-50min

Die height (stroke down, adjust up) 550mm

Slide adjustment 150mm

Dimension of slide ( LRxFB) 1000x800mm

Thickness of bolster 150mm

Clearance between uprights (effective) 1100mm

Window opening 600mm

Counter balance capacity 12kN (1.2ton)

Air pressure in customer's shop (built in air booster) 0.5 Mpa

Main motor VS30 kw

Allowable working energy (continuous) 13 kJ (1.3 ton-m)


1999 Good Condition Photo
450 MA18225 Danly S4-1000-120-84 1000 tons , Bed 3000 x 1800 mm,
Stroke 500 mm,
Shut Height 1600 mm (SDAU, Over bed),
Adjustment 750 mm,
Strokes per minute 20,
Cushions,
Windows - Can be installed,
- 3 presses
Very good condition,Under power Photo
451 MA18157 Niagara BP2-300-72-42 Capacity : 300 Tons, Bed Size : 1050 x 1800 mm, Stroke : 125 mm, Shut Height (SDAU) : 575 mm, Ram Adjusment : 150 mm, Stroke Speed : 45 - 90 SPM, Bed Area Opening : 675 x 1450 mm, Bed to Gibs : 425 mm, Distance between frames : 2031 mm, Distance floor to bolster top to bed : 950 mm, Input Air Pressure : 55 PSI for operation, Main Motor : 60 HP. With Vamco Roll Feed : 375 mm (width of material), 150 mm Wide Pinch type material gripper rolls, With Sesco Feeder & Straightner Unit. 1966 Good condition,under power Photo
452 MA18094 Bliss SE2-1000-132-54 Capacity : 1000 Tons,
Bed Size : 3300 x 1350 mm,
Stroke : 300 mm,
Shut Height : 925 mm,
Adjustment : 250 mm,
Speed : 20 - 50 SPM,
With Rolling Bolster
No Cushions & Hydraulic Overload System.
Good condition,under power Photo
453 MA17995 Weingarten DK315 315 tons ,
Distance between column 2650 mm,
Table/piston clamping area
2450x1560 mm,
No. of stroke 13/mm,
Piston adjustment 300 mm,
Stroke 400 mm
Weigth 85 tons. -2 pcs.
Very good condition Photo
454 MA17866 Komatsu E2M200 200 tons,
Stroke 150 mm,
Speed 40-100 spm
Die Height 450 mm,
SL 100 mm,
bolster size 1500 x 1100 x 180 mm, side size 1500 x 900 mm,
1991 Good Condition Photo
455 MA17601 Verson ES1-400-36-36 400 tons , stroke 400 mm, shut height 975 mm, adjustment 150 mm, bed 900 x 1000 mm, 30SPM , windows 700 x 600 mm, trend series 4 load guard. Very good condition Photo
456 MA17459 WMW Erfurt,Germany 315 tons,

conrods
2,

table dimensions 2500 x 1250 mm,

slide dimensions 2500 x 1250 mm,

stroke
400 mm,

light at tdc*
1100 mm,

stroke/min
regolabile da 10 a 40,

slide adjustment
200 mm,

lateral window
1600 mm,

number of guide
4,

blank holder

number
2,

power
63 ton,

stroke
160 mm,

motors,

safety system,
hydraulic,

weight
76 ton
,
front
4200 mm,

deep
2200 mm,

height
7100 mm,

accessories
with lateral moving bloster
Very good condition Photo
457 MA17447 Arisa G250RSF 250 tons , working surface 880 x 1520 mm, tooling max weight 425 mm, speed 35SPM , cushion AP2-25 , cushion capapcity 25 TM Very good condition Photo
458 MA17446 Arisa SC160S 160 tons , working surface 920 x 650 mm, tooling max weight 385 mm, speed 40-60 SPM , whitch feeding equipment , coiler weight admiteed 1.2 tons , coiler min/max dia 525/1200 mm, max speed 27m/min , coiler internal dia min 325 mm, max feeding height 250 mm. Very good condition Photo
459 MA17445 Arisa 100 tons , 54 SPM , table size 925 x 500 mm, course 130 mm. Very good condition Photo
460 MA17438 Washio PUX150KRC 150 tons,

Stroke 175 mm,

SPM 25 - 45,

DH 390 mm,

Adjust 100 mm,

Bolster 1250 x 750 mm,

1990 Very good condition Photo
461 MA17437 Amada,Japan TP150CX2 150 tons,

Stroke 175 mm,

SPM 30 - 55,

DH 390 mm,

Bolster 1250 x 750 mm,

With Die Cushion

1987 Very good condition Photo
462 MA17436 Amada,Japan NC1-15(1) 150 tons,

Stroke 130 mm,

SPM 40 - 85,

DH 350 mm,

Adjust 100 mm,

Bolster 1170 x 760 mm.
1990 Very good condition Photo
463 MA17435 Amada,Japan NC1-15(2) 150 tons,

Stroke 200 mm,

SPM 30 - 55,

DH 400 mm,

Bolster 1170 x 760 mm
mm
1985 Very good condition Photo
464 MA17434 Amada,Japan TP1502 150 tonS,

Stroke 175 mm,

SPM 30 - 55,

DH 390 mm,

Bolster 1250 x 750 mm,

With Die Cushion.

1987 Very good condition Photo
465 MA17431 Washio PUX200KRC 200 tons,

Stroke 250 mm,

SPM 25 - 40,

DH 460 mm,

Adjust 110 mm,

Bolster 1420 x 840 mm,

With Die Cushion

1985 Very good condition Photo
466 MA17430 AIDA,Japan NC2-200(2) 200 tons,

Stroke 250 mm,

SPM 25 - 45,

DH 500,

Adjust 110 mm,

Bolster 2420 x 840 mm,

With Die Cushion, Knock Out

1989 Very good condition Photo
467 MA17429 AIDA,Japan NC1-200(2) 200 tons,

Stroke 250 mm,

SPM 25 - 45,

DH 370 mm,

Adjust 110 mm,

Bolster 1420 x 840 mm,

With Die Cushion.
Qty : 3 nos.

1991 Very good condition Photo
468 MA17428 AIDA,Japan C1-20(1) 200 tons,

Stroke 160 mm,

SPM 40,

DH 410 mm,

Bolster 1420 x 840 mm.

1978 Very good condition Photo
469 MA17423 Komatsu OBS110-2 110 tons,

Stroke 150 mm,

SPM 50 ,

DH 380 mm,

Adjust 100 mm,

Bolster 1100 x 700 mm

1984 Very good condition Photo
470 MA17422 Amada,Japan TP110C 110 tons,

Stroke 110 mm,

SPM 60 - 120,

DH 300 mm,

Adjust 100 mm,

Bolster 1100 x 700
mm
1987 Very good condition Photo
471 MA17419 Amada,Japan TP110B 110 tons,

Stroke 150 mm,

SPM 60,

DH 420 mm,

Adjust 100 mm,

Bolster 1100 x 700 mm.

1982 Very good condition Photo
472 MA17418 AIDA,Japan NC2-110(2) Double Crank 110 tons,

Stroke 180 mm,

SPM 35 - 65,

DH 400 mm,

Adjust 90 mm,

Bolster 1880 x 680
mm.
1985 Very good condition Photo
473 MA17417 AIDA,Japan NC1-110(2) 110 tons,

Stroke 180 mm,

SPM 35 - 65,

DH 350 mm,

Adjust 90 mm,

Bolster 1080 x 680 mm,

With Die Cushion

1997 Very good condition Photo
474 MA17416 AIDA,Japan NC1-110(2) 110 tons,

Stroke 180 mm,

SPM 35 - 65,

DH 350 mm,

Adjust 90 mm,

Bolster 1080 x 680 mm,

With VS, Die Cushion

1992 Very good condition Photo
475 MA17415 AIDA,Japan NC1-110(1) 110 tons,

Stroke 110 mm,

SPM 50 - 100,

DH 320 mm,adhust 90 mm,

Bolster 1080 x 680 mm

1992 Very good condition Photo
476 MA17414 AIDA,Japan NC1-110(1) 110 tons,

Stroke 110 mm,

SPM 50 - 100,

DH 320 mm,

Bolster 1070 x 520 mm

1997 Very good condition Photo
477 MA17401 Amada,Japan TP3 35 tons , SPM 90,
Stroke 101 mm,
Die Height 262 mm,
Bolster 70 x 400 mm.
1978 Very good condition Photo
478 MA17400 Amada,Japan TP45 45 tons , SPM 75,
Stroke 152 mm,
Die Height 265 mm,
Bolster 800 x 450 mm.
1980 Very good condition Photo
479 MA17399 Amada,Japan TP45 45 tons , SPM 75,
Stroke 152 mm,
Die Height 265 mm,
Bolster 800 x 450 mm.
1981 Very good condition Photo
480 MA17312 Russian KA3539A 800 tons ,ram stroke 320 mm , 20 ram strokes/min , shut height 900 mm ,bed to ram adjustment stroke 320 mm , bed dimensions 2500 x 1600 mm ,ram dimensions 1400 x 1400 mm , bolster plate thickness 250 mm , main drive motor power 75 kW , overall dimensions 4220 x 3500 x 8356 mm , mass 97.6. No Moving Bolster. Good Condition Photo
481 MA17311 TMP Voronezh Russia KA3540 1000 tons, ram stroke 400 mm, SPM 20, shut height 1060 mm, adjustment 320 mm, ram dimensions 3150 x 1700 mm, moving table dimensions 3150 x 1800 mm, bolster plate thickness 260 mm, height above floor level 7830 mm, main motor power 132 kW, dimensions 5150 x 4700 mm, weight 193 tons. with moving bolster. 1989 Dismantled Photo
482 MA17296 Komatsu E2P200-2 Capacity : 200 ton,
Stroke : 300,
Bolster : 2500 x 1300 x 210 mm.
Good Condition Photo
483 MA17163 WMW Erfurt,Germany PKZZIV500.1FS Total capacity 500 t, Stroke 500 mm, Ram adjustment 500 mm, Shut height 1100 mm, Distance between columns 2800 mm, Table size 2800 x 1800 mm, Ram size 2800 x 1700 mm, Main motor 104 kW, Main voltage 380 V, Number of strokes 20 s.p.m., Height over floor approx. 7600 mm. Mechanical single action press. Qty: 3 Nos. 1983/84 Good working condition Photo
484 MA17155 AIDA,Japan Stroke : 450 mm,
Die Height : 675 mm,
SPM : 14,
Adjust : 200 mm,
Bolster : 2130 x 1370 mm,
With DC, Knockout.
Good Condition Photo
485 MA17120 Innocenti Blanch - USI Clearing 400 tons , Table dimensions (X - Y) 2743 x 1524 mm ,
Slide dimensions (X - Y) 2743 x 1524 mm ,
Stroke 610 mm ,
Light at TDC* 1728 mm ,
Speed strokes/min regolabile da 10 a 30 ,
Adjustment slide 305 mm ,
Lateral windows 1500 mm ,
Cuscini Premilamiera ,
Number 2 ,
Capacity 70 Ton ,
Stroke 203 mm ,
Accessories LATERAL TABLE,

MOD. S2-400

Light at TDC: Stroke up and registration slide up
Rough technical data
Very good condition,Under power Photo
486 MA17102 WMW Erfurt,Germany PE2U315-2500-1450 315 tons ,ram stroke 400 mm , ram adjustment 320 mm , shut height 900 mm , distance between columns 2500 mm , ram size 2500 x 1450 mm , table size 2500 x 1450 mm , table bore 2280 x 1020 mm , main motor power 45kW , 25 SPM , die cushion capacity 63 tons , travel of plate of cushion 160 mm , height over floor 7100 mm , 1978 Very good condition Photo
487 MA17070 WMW Erfurt,Germany PKZVI800FS Capacity 800 ton,
Stroke 508mm,
Number of strokes 14 s.p.m.,
Shut Height (S.D.A.U.) 1500 mm,
Adjustment 700 mm,
Table surface 4000 x 2500 mm,
Ram surface 3950 x 2500 mm,
Cushion in bed 160 t,
Cushion stroke 200 mm,
Cushion area 3710 x 1760 mm,
Motor 90 kW,
Weight approx. 217 ton.
with frontal moving bolster, with
pneumatic cushion.
Good Condition Photo
488 MA17068 Verson S2-500-144-60 500 tons,



300 mm stroke,
3600 x 1500 mm bed area,
3600 x 1500 mm ram area,

equipped with:
motor & controls
air clutch & brake
air counterbalances
dipro package
light curtains

Excellent condition,under power Photo
489 MA17058 Russian KA3540 1000 tons, ram stroke 400 mm, SPM 20, shut height 1060 mm, adjustment 320 mm, ram dimensions 3150 x 1700 mm, moving table dimensions 3150 x 1800 mm, bolster plate thickness 260 mm, height above floor level 7830 mm, main motor power 132 kW, dimensions 5150 x 4700 mm, weight 193 tons. With moving table 1990 Very good condition Photo
490 MA17030 Schuler German L4-400-1.5 Capacity - 400 t, maximal width of sheet - 1500 mm, maximal thickness of sheet - 6 mm, course of slider - 24 mm, slider strokes per minute - 80...300, weight - 40 t. 1991 Very good condition Photo
491 MA17029 Schuler German L4-160-1.25 Capacity - 160 t, maximal width of sheet - 1250 mm, maximal thickness of sheet - 3 mm, course of slider - 15 mm, slider strokes per minute - 100...400, weight - 18 t. 1991 Very good condition Photo
492 MA17025 WMW-VEB PEE250 250 tons,
throat 400 mm,
hole in the table 160 mm,
ram stroke 36  126 mm,
number of strokes continuous operation:40 stroke/min,
adjustability of ram 110 mm,
table area 1000 x 750 mm,
ram surface 630 x 500 mm
Good Condition Photo
493 MA17024 WMW-VEB PEE400 400 tons,
throat 400 mm,
stroke 40 - 140 mm,
table-size 1250 x 750 mm,
ram surface 800 x 630 mm,
dayligth 450 mm,
no. of strokes 32 Hub/min,
ram adjustment 125 mm,
die-cushion pressure 25 tons,
die cushion stroke 88 mm.
Good Condition Photo
494 MA16984 WMW Erfurt,Germany PKZZIII315.1FS 315 tons,stroke of slide 400 mm, adjustment of slide 400 mm, max. daylight between bolster and slide, SDAU 900 mm, distance between columns 2500 mm, slide area 2500 x 1400 mm, bed area 2500 x 1400 mm, opening in bed 2100 x 1000 mm, main motor 55kW, idle stroke per minute 25, stroke of cushion plate 160 mm, main motor 55kW, height above ground 6350 mm, dimension of cushion plate 2090 x 990 mm, thickness of plate 170 mm, total weight 130 ton. Good Condition Photo
495 MA16933 AIDA,Japan C2-11(2) 110 tons,
Stroke 180 mm,
SPM 35 - 65,
DH 400 mm,
SL 1300 x 520 mm,
Bolster 1780 x 680 mm,
Motor 7.5 Kw.
1979 Good Condition Photo
496 MA16932 AIDA,Japan C2-11(2)B 110 tons,
Stroke 180 mm,
SPM 35 - 65,
DH 400 mm,
SL 1300 x 520 mm,
Bolster 1780 x 680 mm,
Motor 7.5 Kw.
1981 Good Condition Photo
497 MA16865 WMW Erfurt,Germany PKZZI2000/4000 2000 tons , Centres of pressure 2, ram streoke 630 mm, adjustment of ram 630 mm, shut height 1120 mm, distance between columns 4000 mm, ram size 3950 x 1800 mm, table size 4000 x 1800 mm, bore in table 3750 x 1300 mm, main motor power 160 kW , 11 SPM , capacity of die cushion 400 tons , travel of plate cushion 250 mm, approx height over floor 10500 mm. 1962 Complete Photo
498 MA16571 AIDA,Japan C2-110(2) Capacity 110 tons,
Stroke 180 mm,
SPM 35 -65,
Die Height 400 mm,
Slide Adjust 90 mm,
Slide Area 1300 x 520 mm,
Bolster Area 1780 x 680 mm,
Bolster Thickness 130 mm,
Power 7.5 kw x 4,
Frame Gap 350 x 605 (b1 x h1 on drawing),
Frame Distance 1378 (a1 on drawing),
Press Width 2200 (a4 on drawing),
Press depth 2070 (b4 on drawing),
Press Height 350(h2 on drawing),

1983 Good Condition Photo
499 MA16484 WMW Erfurt,Germany PKZZIV500.1FS 500 tons , turn of table 2800 x 1800 mm , reception of table 2400 x 1250 mm , ledge of put forward table 500 mm , number of single courses min: 16,20,25 , weight 120 tons . No Electrical. 1983 Good Condition Photo
500 MA16064 WMW Erfurt,Germany PKZZIV500.1FS 500 tons , turn of table 2800 x 1800 mm , reception of table 2400 x 1250 mm , ledge of put forward table 500 mm , number of single courses min: 16,20,25 , weight 120 tons . Double crank, moving bolster to front. 1978 Good Condition Photo
501 MA16035 WMW Erfurt,Germany PE2U315FS Max. press capacity 125 mm, before NMT 3150 KW, Max. press capacity 160 mm before NMT 1100 kN, Power at main motor 45 kW, Main sizes: distance between side columns 2500 mm, Ram stroke 400 mm, Ram Adjustment 320 mm, Max. shut height of press 900 mm, Height of pull out table 500 mm, Surface of table press 2500 x 1450 mm, Surface of ram of press 2500 x 1450 mm, Dimensions of press above floor 7100 x 4400 x 2750 mm, dimensions of press below floor level 4000 x 4900 x 3000 mm. 1985 New ,Unused Photo
502 MA16017 WMW Erfurt,Germany PKZZI1250/4000 Capacity: 1250 tons, Ram stroke 630 mm ,11 SPM, shut height 1165 mm, adjustment 630 mm, Bed 4000 x 1800 mm, ram dimensions 3950 x 1800 mm, max. drawing depth 250 mm, Cushion Power 2500 kN, Main Drive motor 125 kW, Dimensions of press 7000x4300 mm, Height above floor level 9500 mm, Weight 245 tons. Good Condition Photo
503 MA15939 WMW Erfurt,Germany PKZZI2000 Nominal force 2000, Distance between columns 4000 mm, Ram stroke 630 mm, Cushion capacity 400, No. of strokes/min 11, Main motor power 160,Shut height 1120 mm, Ram adjustment 630 mm, Table size 4000x 1800 mm, Ram size 3950x 1800 mm, Dimensions 7300x5000x10500 mm. 1975 Excellent Photo
504 MA15923 WMW Erfurt,Germany PKZZ500 500 Tons,Bed Size 2800 x 1600mm,Strokes/min 14,Stroke 500mm,Ram Adjustment 500mm,Distace between table and ram with height adjustment 1000mm,Cushion Capacity 100 Tons,Cushion Stroke 200mm,Lateral Window 680 x 800 mm. Good Condition Photo
505 MA15897 Agostino Colombo 250 tons , table dimensions 2000 x 1200 mm, fixed stroke 240 mm, 25 SPM , distance between shoulders 440 mm, overall dimensions 3400 x 1640 x 4250 mm, weight 22 tons. Reconditioned Photo
506 MA15896 Radaelli 200 tons , table dimensions 1400 x 900 mm, fixed stroke 200 mm, 44 SPM , distance between shoulders 560 mm, motor power 10 HP, overall dimensions 1900 x 2500 x 3850 mm. Reconditioned Photo
507 MA15842 WMW Erfurt,Germany PKNVT800.1FS Capacity 800 tons,Double arm,double acting,four crank press,max. force of internal slider 500 ton max. force of external slider 315 ton, course ofinternal slider 800mm, course of external slider 630mm,slider strokes per minute-16. size of internal slider 1600x2500mm, size of external slider 2100x3150mm,main electric motor power 160 kW,weight 275 ton.hydrocushion , moving bolster. Press in excellent condition, complete.All technical documentation is available. 1979 excellent working condition Photo
508 MA15804 Danly SL4-2500-228-96 2500 tons , bed 5700 x 2400 mm, slide 5700 x 3000 mm, stroke 150 mm, 10-24 variable SPM , windows 3500 mm, 2 rolling bolsters , blank loader , Atlas transfer system , Atlas Destacker . Excellent condition,almost new Photo
509 MA15628 WMW Erfurt,Germany PKZVI800FS 4 Crank, 800 tons, stroke of slide 500 mm, adjustability of slide 500 mm, max. daylight between bolster and slide SDAU 1700 mm, width between columns 4000 mm, slide area (WxD) 3950 x 2500 mm, bed area (WxD) 4000 x 2500 mm, opening in bed (WxD) 3520 x 1520 mm, idle stroke rate 14 per min., counterpressure of cushion in bed 160 tons, stroke of cushion plate 200 mm, height above ground 8400 mm, With moving bolster. 1978 Excellent ,unused Photo
510 MA15348 WMW Erfurt,Germany PKZZ500/2800 500 Tons, Bed Size 2800 x 1400 mm, With Hydraulic Overload System, moving bolster 1987 Working Photo
511 MA15340 Schuler German P2K2S 350/1,6 350 tons ,
passage width 1650 mm,
stroke 500 mm,
table surface area 1600 x 1200 mm,
ram surface 1450 x 1200 mm,
table pass 2x670x850 mm,
dayligth 600 mm,
thickness of bolster 200 mm,
ram adjustment 180 mm,
air-pressure drawing device in the table,
diameter of piston 560 mm,
piston stroke 180 mm,
die cushion capacity 105 t,
total power requirement 40 kW.
1967 Good Condition Photo
512 MA14526 WMW Erfurt,Germany PKZV315/2500 315 tons, ram stroke 400 mm, ram adjustment 400 mm, shut height 750 mm, distance between columns 2500 mm, ram size 2500 x 1400 mm, table size 2500 x 1400 mm, bore in table 2100 x 1000 mm, main motor power 55 kW , 25 SPM, die cushion capacity 63 tons , travel plate of cushion 160 mm, approx height over floor 6350 mm, moving bolster Good Condition Photo
513 MA14523 WMW Erfurt,Germany PKZV800.1FS 800 tons, ram stroke 500 mm, ram adjustment 500 mm, shut height 1700 mm, distance between columns 4000 mm, ram size 3950 x 2500 mm, table size 4000 x 2500 mm, bore in table 3520 x 1520 mm, main motor power 90 kW , 14 SPM , capacity of die cushion 160 tons , travel of plate of cushion 200 mm, approx height over floor 8400 mm, moving bolster. 1984 Good Condition Photo
514 MA14386 WMW Erfurt,Germany PKZE1250/1600 1250 tons , slide stroke 500 mm, slide adjustments 250 mm, shut height 1100 mm, table 1600 x 1850 mm, slide 1300 x 1400 mm, cushion 300 tons- 2 machines 1988 Good working condition Photo

Video
515 MA14246 Clearing F4.1000.168 Capacity : 1000 Ton, Ram : 4280 x 2438 mm, Stoke : 762 mm, Daylight (Stroke Downn,Adjustment Up) : 1456 mm, Strokes Per Minute : 12 - 18, Adjustment of Ram :610 mm, Moving Bolster : 4265 x 2445 mm- 2 machines 1965 Good Condition Photo
516 MA14134 Schuler German P4E2SU800x4.5 Capacity : 800 Tons, Bed Size : 4500 x 2700 mm (Moving Bolster), Slide Stroke : 600 mm, Max. distance between table/slide : 1600 mm, 8 SPM, Clearance between column : 4600 mm, Table travel : 200 mm, Table Lower cushion : 240 Tons, Travel : 200 mm, Slide Upper cushion : 10 Tons 1971/2003 Good Condition Photo
517 MA13780 Hesse CDCS401P 25 tons , stroke rate 150 1/min,
stroke 10 - 65 mm,
throat depth 230 mm ,
table 560 x 400 mm,
drive by gear,
4-fold ram guides,
combined clutch brake unit with electro-pneumatic control,
ram adjustment,
single and continuous stroke,
manual stroke adjustment,
manual central lubrication ,
fixed table,
foot pedal and 2 hand controlg,
mech. overload safety device,
bolster plate with T-slots,
machine and equipment in conformity with CE-regulations,
motor power 4,0 kW,
weight 2.100 kg,
main dimensions 925 x 1.700 x 2.065 mm ,
Brand New Brand New Photo
518 MA13779 Hesse CDCS401P 40 tons , stroke rate 155 1/min,
stroke 5 - 75 mm,
throat depth 230 mm,
table 630 x 450 mm,
drive by gear,
4-fold ram guides,
combined clutch brake unit with electro-pneumatic control,
ram adjustment,
single and continuous stroke,
manual stroke adjustment,
manual central lubrication ,
fixed table,
foot pedal and 2 hand controlg,
mech. overload safety device,
bolster plate with T-slots,
machine and equipment in conformity with CE-regulations,
motor power 4 kW,
weight 2.270 kg,
main dimensions 1100 x 1700 x 2050 mm


Brand New Brand New Photo
519 MA13256 WMW Erfurt,Germany PKZZI1250 1250 tons , Centres of pressure 2 , slide stroke 630 mm , Adjustability of slide 630 mm,
Max. daylight between bolster and slide, SDAU 1165 mm,
Width between columns 400 mm , Slide area (W x D) 3950x1800 mm,
Bed area 4000x1800 mm,
Opening in bed (W x D) 3750x1300 mm,
Main motor power 132 kW ,
Idle stroke rate 11 per min ,
Counterpressure of cushion in bed T 250 ,
Stroke of cushion plate 250 mm ,
Height above ground 9500 mm- 2 machines
Good Condition Photo
520 MA11974 Weingarten ZS1300.45 1300 tons ,
Final ram pressure since 25 mm deepest position 800 tons ,
Max. toolholder pressure since 6 mm before
deepest position 500 tons ,
Total working capacity with stroke number
of 8 / min 20000 mkg,
Ram speed at 300 mm bottom dead center with
stroke numer 8/min. 0,19 m/s,
Ram speed at 300 mm bottom dead center with
stroke number 18/min. 0,43 m/s,
Distance betw. uprights 4500 mm,
Max. drawing depth 300 mm,
Strokes per minute in continuous operation, stepless 8-18 /min,
Numbers of individual strokes, stepless 6,4 - 14,4 /min,
Stroke of drawing ram 1016 mm,
Stroke of sheet-holder 863 mm,
Table clamping area 4030 x 2438 mm,
Sheet-holder clamping area 4200 x 2540 mm,
Ram clamping area 3660 x 1984 mm,
Adjustment of sheet-holder and drawing ram 508 mm,
Daylight betw. table and drawing ram:
stroke down, adjustment up 2550 mm,
Daylight betw. table and sheet-holder:
stroke down, adjustment up 2050 mm,
Run-up of ram before lift-off of sheet-holder 25 mm,
Adjustable main drive, capacity 160 kW,
Adjustable main drive, speed 1500 RPM,
Power for ram and sheet-holder adjustment 7,5 kW,
Speed of adjustment motors each 1500 RPM,
Total height of the machine over floor 10700 mm, With Moving Bolster
1971 Good Condition Photo
521 MA9981 Chinese JC31-315 315 tons, thickness of slide stroke 140 mm, length of slide stroke 315 mm, no. of slide stroke 20 per min., dimension of slide stroke 960 mm (F-B), 910 mm (L-R), table size length 1100 mm, prime driving motor power 30 kW, closed height max. 630 mm, min. 430 mm, machine weight 35 tons, Brand New Photo
522 MA9980 Chinese JC31-250 250 tons, thickness of slide stroke 140 mm, length of slide stroke 315 mm, no. of slide stroke 20 per min., dimension of slide stroke 850 mm (F-B), 980 mm (L-R),table size length 950 mm, prime driving motor power 30 kW, closed height max. 630 mm, min. 430 mm, machine weight 30.5 tons, Brand New Photo



G-59/60, E Block, Simla House, Nepean Sea Road, Mumbai 400036. India.
Phone : +91-22-66644462 /63 /69     Fax : +91-22-23690034
E-mail : info@nvmachinery.com / info@machineworld.in